Epson P)-1, HWDV080DV(N installation instructions Installation

Page 1

INSTALLATION

INSTRUCTIONS AND OWNER'S MANUAL

Installer: Leave this manual with the ap- pliance.

Consumer: Retain this manual for future reference.

WARNING: If the information in these in- structions are not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

Do not store or use gasoline or other flam- mable vapors and liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance.

Do not touch any electrical switch; do not use any phone in your building.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency or the gas supplier.

DIRECT VENT

WALL FURNACE

STANDARD MODELS:

HWDV080DV(N,P)-1

HWDV181DV(N,P)-1

MODELS WITH BLOWER:

HWDV080BDV(N,P)-1

HWDV181BDV(N,P)-1

GAS-FIRED

This appliance may be installed in an after- market, permanently located, manufactured home (USA only), or mobile home, where not prohibited by state or local codes.

This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases.

WARNING: If not installed, operated, and maintained in accordance with the manufactur- er's instructions, this product could expose you to substances in fuel or from fuel combustion which can cause death or serious illness.

DO NOT RETURN THIS PRODUCT TO THE STORE WHERE YOU PURCHASED IT. IF YOU ARE MISSING PARTS, OR HAVE ANY PROBLEMS, CONTACT EMPIRE COMFORT SYSTEMS INC. AT (877) 459-1583.

Page 1

Image 1
Contents Installation Table of Contents Included in the BOX Tools Needed Hardware PacketsSpecifications GAS SpecificationsHigh Altitude Specifications Unit Dimensions Follow State and Local codes for installation Important Safety InformationLP-GAS Warning Odor Safety Information for Users of LP-GASIntroduction Instructions to InstallerDIRECTLYBELOW. Keepclear OFALLOBSTRUC- Tions Requirements for MassachusettsTermination Clearances Description US Installations1Locating Gas Supply GAS SupplyClearances GAS SupplyLocation All Models Installation Instructions OverviewInstallation Overview Installation and AssemblyClearances to Combustibles Mounting Template for HWDV080BDV HWDV181BDV Pilot Hole Interior Installation of the Front of the Unit Cutting the Vent Tubes Marker Flue Outlet Tube Collar Exterior Installation of the Venting DIA. Vent CAP Collar Furnace Cement Screws Reassembly and Resealing VENT-AIR Intake System DIA. Vent CAP Collar Furnace Cement Screws Installation of Optional Blower KIT HW125SCB Installation of Optional Blower KIT HW125SCB Installation of Optional Blower KIT HW125SCB Pull blower cord from bottom to remove any excess wire from Before Operating Appliance Before Operating Appliance Before Operating Appliance What to do if YOU Smell GAS What to do if YOU Smell GAS Operating InstructionsTo Turn OFF GAS to Appliance Lighting InstructionsMain Burner Flame Characteristics Pilot Flame CharacteristicsOperation Frequency Faults to be Remarks Prevented Maintenance InstructionsHOW to Order Repair Parts TroubleshootingProblem Causes Solution Index no Description HWDV080 HWDV181 Parts ListBulb Clip Parts View Service Notes Service Notes Service Notes Freeburg Ave. Belleville, IL 62220 PH877-459-1583 FAX