Epson P)-1 Important Safety Information, Follow State and Local codes for installation

Page 7

IMPORTANT SAFETY INFORMATION

Children and adults should be alerted to the haz- ards of high surface temperatures and should stay away to avoid burns or clothing ignition.

Any safety screen or guard removed for servicing must be replaced prior to operating the heater.

Do not use this heater if it has been under water. Immediately call a qualified service technician to inspect the heater and to replace any part of the control system and any gas control which has been under water.

Young children should be carefully supervised when they are in the same room as the heater.

Installation and repair should be done by a quali- fied service person. Heater should be inspected be- fore use and at least annually by a qualified service person.

More frequent cleaning may be required due to ex- cessive lint from carpeting, bedding material etc. It is imperative that control compartments, burners, and circulating air passageways of the appliance be kept clean.

Follow State and Local codes for installation.

DO NOT put anything around or on top of the fur- nace that will obstruct the flow of combustion and ventilation air.

DO keep the appliance area clear and free from combustible material, gasoline and other flamma- ble vapors and liquids.

DO examine venting system periodically and re- place damaged parts.

DO make a periodic visual check of pilot and burn- ers. Clean and replace damaged parts. CAUTION: Pilot hole cover must be kept tightly closed during operation.

Vent cap hot while furnace is in operation.

24632-0-0508

Page 7

Image 7
Contents Installation Table of Contents Included in the BOX Tools Needed Hardware PacketsSpecifications GAS SpecificationsHigh Altitude Specifications Unit Dimensions Follow State and Local codes for installation Important Safety InformationLP-GAS Warning Odor Safety Information for Users of LP-GASIntroduction Instructions to InstallerDIRECTLYBELOW. Keepclear OFALLOBSTRUC- Tions Requirements for MassachusettsTermination Clearances Description US Installations1Locating Gas Supply GAS SupplyClearances GAS SupplyLocation All Models Installation Instructions OverviewInstallation Overview Installation and AssemblyClearances to Combustibles Mounting Template for HWDV080BDV HWDV181BDV Pilot Hole Interior Installation of the Front of the Unit Cutting the Vent Tubes Marker Flue Outlet Tube Collar Exterior Installation of the Venting DIA. Vent CAP Collar Furnace Cement Screws Reassembly and Resealing VENT-AIR Intake System DIA. Vent CAP Collar Furnace Cement Screws Installation of Optional Blower KIT HW125SCB Installation of Optional Blower KIT HW125SCB Installation of Optional Blower KIT HW125SCB Pull blower cord from bottom to remove any excess wire from Before Operating Appliance Before Operating Appliance Before Operating Appliance What to do if YOU Smell GAS What to do if YOU Smell GAS Operating InstructionsTo Turn OFF GAS to Appliance Lighting InstructionsMain Burner Flame Characteristics Pilot Flame CharacteristicsOperation Frequency Faults to be Remarks Prevented Maintenance InstructionsHOW to Order Repair Parts TroubleshootingProblem Causes Solution Index no Description HWDV080 HWDV181 Parts ListBulb Clip Parts View Service Notes Service Notes Service Notes Freeburg Ave. Belleville, IL 62220 PH877-459-1583 FAX