Installation
short
screws
short
screws
1. Insert guide panels into air conditioner guides.
2. Attach curtains to air conditioner with short screws.
seal strip
3. Cut
Note: Maintain a firm hold on air conditioner to prevent it from falling out of the opening during installation.
inner sill
room side
centerline
4. Open window and mark centerline of inner sill.
inner sill | short | INSIDE |
| screw |
|
outer sill |
| centerline |
|
|
8"
(20.3 cm) 
!WARNING
Excessive Weight Hazard
Use two or more people to move and install air conditioner.
Failure to do so can result in back or other injury.
6. Carefully lift air conditioner and slide it into open window. Make sure bottom guide of air conditioner drops into L bracket. Be sure that air conditioner is centered in window from right to left.
window frame | seal |
| |
upper guide |
|
| about |
| 1/4" |
bottom guide | (6.3 mm) |
|
Lbracket
7.Lower window sash down behind upper guide of air conditioner. Make sure the air conditioner tilts to the back as shown.
L bracket
short
screw
sash seal
wood screw
OUTSIDE
8" 
(20.3 cm)
8. Extend guide panels to fill window opening. Use 4
Lbracket
5.Attach one L bracket 8 inches (20.3 cm) from either side of centerline, flush against back of inner window sill, with short side of bracket in vertical position. Brackets will help hold air conditioner in place. Use 2 short screws.
wood screws.
9. Insert sash seal behind top of lower window sash and against glass of upper window.
10. Fasten L bracket using a short screw.
11