Bosch Appliances MIC612 Configuring Preposition Tours, Programming the Inactivity Operation

Page 60

60 en Common User Commands

MIC612 Thermal Camera

 

 

To clear a character from a title:

1.Use the joystick to highlight the Clear OR Position Character prompt.

2.Move the joystick left or right until the cursor is below the title character that you need to clear.

3.Press Focus/Iris to clear the character.

4.Move the joystick up to bring the cursor back into the character palette.

To save a title:

1.Use the joystick to highlight the Exit prompt.

2.Press Focus/Iris to save the title.

9.4

Configuring Preposition Tours

A Preposition Tour automatically moves the camera through a series of preset or saved shots. The MIC612 has one (1) standard preset tour and one (1) customized preset tour. Tour 1 is a standard tour that moves the camera through a series of shots in the sequence that they were set. Tour 2 is a custom tour that allows you to change the sequence of shots in the tour by inserting and deleting scenes.

To start Preposition Tour 1:

1.Set a series of preset shots in the order that you want the MIC612 to cycle through.

2.Press ON-8-ENTERto start the tour. The tour then cycles through the series of shots until

it is stopped.

To stop a Preposition Tour:

Press OFF-8-ENTERor move the joystick to stop either type of tour.

To add or remove scenes to Preposition Tour 1:

1.Press SHOT-900-ENTER to access the Add/Remove Scenes Menu.

2.Use the Focus/Iris buttons to add or remove the selected scene from the tour.

To start custom Preposition Tour 2:

Press ON-7-ENTERto start a tour. The tour cycles through the series of shots (in the order that they were defined) until it is stopped.

To edit a custom Preposition Tour 2:

1.Press SET-900-ENTER to access the Add/Remove Menu.

2.Press the Focus/Iris buttons to add or remove the selected scene.

To change the dwell period of a tour:

1.Press ON-15-ENTER to access the Tour Period Menu.

2.Select the tour (Tour 1 or Tour 2) and follow the on-screen instructions.

9.5

Programming the Inactivity Operation

You can program the MIC612 to change its operating mode automatically after a period of inactivity.

To access the Inactivity mode (locked command):

1.Press OFF-90-ENTERto turn off the command lock.

2.Press ON-9-ENTER to access the Inactivity Mode Menu.

3.Select one of the following choices:

–Return to Scene 1: Returns the camera position to Shot 1.

–Recall Previous Aux: Returns the camera to the previous operating mode, such as a Preposition Tour.

F.01U.249.416 2.0 2012.09

Installation Manual

Bosch Security Systems, Inc.

Page 59 Page 61
Image 60
Page 59 Page 61
Contents MIC612 Thermal Camera Page Table of Contents Common User Commands Advanced FeaturesOn-Screen Display OSD Menus Bosch Protocol On-Screen Display OSD Menus Pelco ProtocolMaintenance and Troubleshooting Keyboard Commands By Number IndexSafety Important Safety InstructionsAbout this Manual Conventions in this ManualMIC612 Thermal Camera Safety en EC Directives Important NoticesCoax grounding FCC and Ices Compliance FCC ET Ices Information commercial applicationsInformations FCC ET Ices applications commerciales Customer Support and Service Bosch NoticesUSA Parts List 2UnpackingAdditional Products Required Additional Tools RequiredInstallation Overview MIC camera mounting positions Upright, InvertedTypical Mounting Arrangements Number DescriptionMounting Positions About Alarm Inputs and Outputs An 8-input alarm card installed in the MIC PSUAlarm Card Number Installed? Alarm Inputs Alarm Outputs 3About the MIC Shielded Composite CableInstallation Typical Installation ConfigurationsMIC-BP4 sold separately Overview of Installation Steps Example 2 Configuration with RS-485 protocol connectionFollow these steps in sequence to install the MIC612 camera Mounting the Camera Installing the MIC Power Supply Unit PSU Earth Link on PCB Fuse Ratings3Layout of MIC Power Supply Units PSUs for MIC612 4Installation Instructions Electrical Shock HazardNumber Description PCB Marking Description Number Description Cable Gland Size AUX1AUX2 MIC612 Thermal Camera Installation en Power supply. Follow these steps Disconnect the power supply from the power sourceCommissioning the Camera with Heater Option Fitted LED DescriptionFitting the Optional Sunshield MIC612 Bottom half of the sunshield see stepHead is facing up ScrewdriverEstablishing Control of the Camera via Biphase Protocol Getting StartedEstablishing Control of the Camera Establishing Control of the Camera via RS-485 ProtocolPowering On Controlling the CameraBasic Keyboard Operation LCDKeyboard Commands, Bosch Protocol 4Keyboard Commands, Pelco ProtocolNavigating the On-Screen Display OSD Menus 4Setting the Addresses of the Two Cameras of the MIC612 Special Preset Commands, Pelco ProtocolPreset Setting the Address of the Optical Camera via FastAddress FastAddress, Bosch Protocol3FastAddress, Pelco Protocols To set an address for a camera without an addressTo change or clear an address for a camera with an address To set FastAddress with a Pelco KeyboardSetting Passwords Configuring the Camera for Inverted OperationActive Commands in FastAddress Special PasswordsSetup Menu 6On-Screen Display OSD Menus Bosch ProtocolCamera Setup Menu ATWWDR Thermal Camera Setup Menu Lens Setup Menu ManualPTZ Setup Menu Display Setup Menu Display Adjust Camera OSDAzimuth CompassCommunication Setup Menu Communication SetupAutoBaud Baud RateAlarm Setup NoneOutputs Setup Submenu Outputs Setup Submenu ChoicesOutputs OSDRule Setup Submenu Rule SetupRule Setup Submenu Choices Rule # Choices EnabledLanguage Menu InputOutput Diagnostics Menu BistSecurity Access Ctfid AccessPower Up Events Internal HumidityAlarm Status Submenu Alarm InputAlarm Output Total Time OnOn-Screen Display OSD Menus Pelco Protocol Camera Setup Pelco menu Bosch menu Setup MenuBosch Menu ContinuousPTZ Setup WhiteOutdoor BalanceOther Menus OFFSwitching Video Displaying Thermal Camera TemperatureOperation of the Thermal Camera Flat-Field Correction FFCTriggering Alarms On Detection of Objects Outside of Set Thermal Temperature ThresholdSet the Temperature Threshold Set the Alarm RuleCommon User Commands Setting AutoPan ModeSetting Preset Shots Specifying a Shot or a Sector TitleConfiguring Preposition Tours Programming the Inactivity OperationUsing the Wiper/Washer Recording ToursAdvanced Features 10.1 Alarm Rules10.1.1 Controlling Alarm Rules 10.1.2 Alarm Rule ExamplesExample 2 Advanced Alarm Rule 10.2 Privacy Masking10.5.1 Setting the Azimuth Zero Point 10.3 Image Stabilization10.4 Pre-position Tour 10.5 Azimuth, Elevation, and Compass Directions10.5.2 Displaying Azimuth, Elevation, and Compass Headings 180 / -45 S11Maintenance and Troubleshooting Problem Explanation SolutionKeyboard Commands By Number Keyboard Commands Bosch ProtocolCommands, Optical Camera Zone/Sector Title Menu Enters the Zone Title menu. Refer to Refer to .5 Azimuth, Elevation, Compass Directions,Commands, Thermal Camera 70 en MIC612 Thermal Camera Keyboard Commands Pelco Protocol Keyboard User Action Description CommandEn MIC612 Thermal Camera Index #-ENTERPre-compensation 39 sharpness 38 shutter White balance En Index MIC612 Thermal Camera Constant focus 41 manual focus 41 spot focus Custom tour PTZShot Zero panPage Page Bosch Security Systems, Inc

MIC612 specifications

The Bosch Appliances MIC612 is an innovative and highly efficient piece of kitchen equipment that enhances the culinary experience for home chefs and professionals alike. Renowned for its quality, Bosch has developed this compact microwave that combines advanced technology with user-friendly features.

One of the standout characteristics of the MIC612 is its sleek design, seamlessly incorporating into various kitchen styles. With its stainless-steel finish, the microwave not only offers aesthetic appeal but also ensures durability and easy maintenance. Its compact size makes it an ideal fit for smaller kitchens or areas where space is limited, while still providing ample cooking capacity.

The MIC612 is equipped with intelligent cooking technology. This includes sensor cooking, which automatically adjusts cooking time and power levels based on moisture detected in the food. This feature simplifies meal preparation by eliminating the need for constant monitoring, ensuring perfectly cooked dishes every time. Additionally, the microwave offers multiple cooking modes, including reheating, defrosting, and cooking with precision.

For those who appreciate convenience, the MIC612 includes pre-programmed settings for common foods like popcorn, pizza, and baked goods. This allows users to enjoy a wide variety of meals with minimal effort. The intuitive control panel and clear digital display enhance the ease of use, enabling quick selection of settings and cooking times.

Safety is a paramount concern for Bosch, and the MIC612 does not disappoint. It features a child safety lock, ensuring that curious little hands cannot accidentally operate the appliance. Moreover, the design incorporates a reliable cooling system to prevent overheating and ensure longevity.

Energy efficiency is another highlight of the Bosch MIC612. It is designed to consume less power compared to traditional microwaves, making it an eco-friendly choice without compromising performance. The combination of cutting-edge technology, thoughtful design, and practical features makes the Bosch Appliances MIC612 a valuable addition to any kitchen, offering versatility and reliability for all cooking needs. Whether reheating leftovers or preparing a fresh meal from scratch, this microwave stands out as a remarkable option for modern culinary tasks.
Top Page Image Contents