Bosch Appliances MIC612 11Maintenance and Troubleshooting, Problem Explanation Solution

Page 66

66 en Maintenance and TroubleshootingMIC612 Thermal Camera

11Maintenance and Troubleshooting

The unit contains no user-serviceable parts. Maintenance and repair of this equipment shall only be carried out by suitably trained personnel in accordance with the applicable code of practice (for example, EN60097-19). In the event of failure, the unit should be removed from site for repair.

To maintain the validity of the certification, only components supplied by Bosch Security Systems shall be used.

It is recommended that the equipment be inspected on-site every six months to check mounting bolts for tightness, security, and any signs of physical damage. Inspection of this equipment shall only be carried out by suitably-trained personnel in accordance with the applicable code of practice (for example, EN60097-17).

The table below identifies issues that could occur with the camera, and how to resolve them.

Problem

Explanation

Solution

A green square appears

This is the Flat Field Imminent

Do nothing; this is normal

intermittently at the

Symbol. It warns that FFC is about

operation for the thermal

upper right of the video

to begin.

camera.

output.

 

 

 

 

 

The thermal image

This often occurs when the

Perform a flat-field correction

appears ’grainy’.

temperature of the camera

(FFC).

 

fluctuates, such as after the

 

 

camera is powered on, or when

 

 

ambient temperature is changing.

 

F.01U.249.416 2.0 2012.09

Installation Manual

Bosch Security Systems, Inc.

Image 66
Contents MIC612 Thermal Camera Page Table of Contents On-Screen Display OSD Menus Bosch Protocol Common User CommandsAdvanced Features On-Screen Display OSD Menus Pelco ProtocolMaintenance and Troubleshooting Keyboard Commands By Number IndexAbout this Manual SafetyImportant Safety Instructions Conventions in this ManualMIC612 Thermal Camera Safety en EC Directives Important NoticesCoax grounding FCC and Ices Compliance FCC ET Ices Information commercial applicationsInformations FCC ET Ices applications commerciales Customer Support and Service Bosch NoticesUSA Additional Products Required Parts List2Unpacking Additional Tools RequiredInstallation Overview MIC camera mounting positions Upright, InvertedTypical Mounting Arrangements Number DescriptionMounting Positions Alarm Card Number Installed? Alarm Inputs Alarm Outputs About Alarm Inputs and OutputsAn 8-input alarm card installed in the MIC PSU 3About the MIC Shielded Composite CableInstallation Typical Installation ConfigurationsMIC-BP4 sold separately Overview of Installation Steps Example 2 Configuration with RS-485 protocol connectionFollow these steps in sequence to install the MIC612 camera Mounting the Camera Installing the MIC Power Supply Unit PSU Earth Link on PCB Fuse Ratings3Layout of MIC Power Supply Units PSUs for MIC612 4Installation Instructions Electrical Shock HazardNumber Description PCB Marking Description Number Description Cable Gland Size AUX1AUX2 MIC612 Thermal Camera Installation en Commissioning the Camera with Heater Option Fitted Power supply. Follow these stepsDisconnect the power supply from the power source LED DescriptionHead is facing up Fitting the Optional Sunshield MIC612Bottom half of the sunshield see step ScrewdriverEstablishing Control of the Camera Establishing Control of the Camera via Biphase ProtocolGetting Started Establishing Control of the Camera via RS-485 ProtocolBasic Keyboard Operation Powering OnControlling the Camera LCDKeyboard Commands, Bosch Protocol 4Keyboard Commands, Pelco ProtocolNavigating the On-Screen Display OSD Menus 4Setting the Addresses of the Two Cameras of the MIC612 Special Preset Commands, Pelco ProtocolPreset Setting the Address of the Optical Camera via FastAddress FastAddress, Bosch ProtocolTo change or clear an address for a camera with an address 3FastAddress, Pelco ProtocolsTo set an address for a camera without an address To set FastAddress with a Pelco KeyboardActive Commands in FastAddress Setting PasswordsConfiguring the Camera for Inverted Operation Special PasswordsSetup Menu 6On-Screen Display OSD Menus Bosch ProtocolCamera Setup Menu ATWWDR Thermal Camera Setup Menu Lens Setup Menu ManualPTZ Setup Menu Display Setup Menu Azimuth Display AdjustCamera OSD CompassAutoBaud Communication Setup MenuCommunication Setup Baud RateAlarm Setup NoneOutputs Outputs Setup SubmenuOutputs Setup Submenu Choices OSDRule Setup Submenu Choices Rule Setup SubmenuRule Setup Rule # Choices EnabledLanguage Menu InputOutput Diagnostics Menu BistPower Up Events Security AccessCtfid Access Internal HumidityAlarm Output Alarm Status SubmenuAlarm Input Total Time OnOn-Screen Display OSD Menus Pelco Protocol Bosch Menu Camera SetupPelco menu Bosch menu Setup Menu ContinuousOutdoor PTZ SetupWhite BalanceOther Menus OFFOperation of the Thermal Camera Switching VideoDisplaying Thermal Camera Temperature Flat-Field Correction FFCSet the Temperature Threshold Triggering Alarms On Detection of Objects Outside of SetThermal Temperature Threshold Set the Alarm RuleSetting Preset Shots Common User CommandsSetting AutoPan Mode Specifying a Shot or a Sector TitleConfiguring Preposition Tours Programming the Inactivity OperationUsing the Wiper/Washer Recording Tours10.1.1 Controlling Alarm Rules Advanced Features10.1 Alarm Rules 10.1.2 Alarm Rule ExamplesExample 2 Advanced Alarm Rule 10.2 Privacy Masking10.4 Pre-position Tour 10.5.1 Setting the Azimuth Zero Point10.3 Image Stabilization 10.5 Azimuth, Elevation, and Compass Directions10.5.2 Displaying Azimuth, Elevation, and Compass Headings 180 / -45 S11Maintenance and Troubleshooting Problem Explanation SolutionKeyboard Commands By Number Keyboard Commands Bosch ProtocolCommands, Optical Camera Zone/Sector Title Menu Enters the Zone Title menu. Refer to Refer to .5 Azimuth, Elevation, Compass Directions,Commands, Thermal Camera 70 en MIC612 Thermal Camera Keyboard Commands Pelco Protocol Keyboard User Action Description CommandEn MIC612 Thermal Camera Index #-ENTERPre-compensation 39 sharpness 38 shutter White balance En Index MIC612 Thermal Camera Constant focus 41 manual focus 41 spot focus Custom tour PTZShot Zero panPage Page Bosch Security Systems, Inc

MIC612 specifications

The Bosch Appliances MIC612 is an innovative and highly efficient piece of kitchen equipment that enhances the culinary experience for home chefs and professionals alike. Renowned for its quality, Bosch has developed this compact microwave that combines advanced technology with user-friendly features.

One of the standout characteristics of the MIC612 is its sleek design, seamlessly incorporating into various kitchen styles. With its stainless-steel finish, the microwave not only offers aesthetic appeal but also ensures durability and easy maintenance. Its compact size makes it an ideal fit for smaller kitchens or areas where space is limited, while still providing ample cooking capacity.

The MIC612 is equipped with intelligent cooking technology. This includes sensor cooking, which automatically adjusts cooking time and power levels based on moisture detected in the food. This feature simplifies meal preparation by eliminating the need for constant monitoring, ensuring perfectly cooked dishes every time. Additionally, the microwave offers multiple cooking modes, including reheating, defrosting, and cooking with precision.

For those who appreciate convenience, the MIC612 includes pre-programmed settings for common foods like popcorn, pizza, and baked goods. This allows users to enjoy a wide variety of meals with minimal effort. The intuitive control panel and clear digital display enhance the ease of use, enabling quick selection of settings and cooking times.

Safety is a paramount concern for Bosch, and the MIC612 does not disappoint. It features a child safety lock, ensuring that curious little hands cannot accidentally operate the appliance. Moreover, the design incorporates a reliable cooling system to prevent overheating and ensure longevity.

Energy efficiency is another highlight of the Bosch MIC612. It is designed to consume less power compared to traditional microwaves, making it an eco-friendly choice without compromising performance. The combination of cutting-edge technology, thoughtful design, and practical features makes the Bosch Appliances MIC612 a valuable addition to any kitchen, offering versatility and reliability for all cooking needs. Whether reheating leftovers or preparing a fresh meal from scratch, this microwave stands out as a remarkable option for modern culinary tasks.