Bosch Appliances MIC612 installation manual Navigating the On-Screen Display OSD Menus

Page 32

32 en Getting StartedMIC612 Thermal Camera

5.3.2

Navigating the On-Screen Display (OSD) Menus

 

The OSD menus provide access to the programmable settings of the camera. The OSD

 

displays only the submenus that are applicable to a particular MIC configuration. Some menu

 

items (indicated as (L)) are locked and require a system password to use. Menu items marked

 

with an asterisk (*) are default factory settings, unless otherwise noted.

 

 

 

NOTICE!

 

After 4.5 minutes of inactivity, the OSD menu times out and exits without warning. Some

 

unsaved settings in the current menu can be lost.

 

 

 

To navigate the OSD menus:

 

1.

Use the joystick to highlight a menu item.

 

2.

Press either the Focus or the Iris key to open a menu item.

 

3.

Follow the on-screen instructions.

 

Note: To select the Exit Menu item from anywhere in the current menu, use the Zoom

 

command.

5.3.3

Keyboard Commands, Bosch Protocol

 

Keyboard control commands are composed of a sequence of three (3) inputs with the

 

following convention: 1) a Function key + 2) a Command number key(s) + 3) the Enter key.

 

–

Depending on the type of keyboard, the control function keys are labeled:

 

 

ON or AUX ON

 

 

OFF or AUX OFF

 

 

SET or SET SHOT

 

 

SHOT or SHOW SHOT

NOTICE!

The convention used for control key commands in this manual is ON, OFF, SET, and SHOT. Refer to your keyboard manual for the key naming conventions.

–Command numbers range from 1 to 999. See Section A Keyboard Commands By Number for a complete list of keyboard commands for Bosch protocol.

–The Enter key can also be labeled with the ∞ symbol.

For example, the keyboard command to make the MIC612 pan 360º continuously is:

ON-1-ENTER(Press the ON key, then press the number 1 key, and then press ENTER.)

5.3.4Keyboard Commands, Pelco Protocol

Pelco control commands are composed of a sequence of two (2) keyboard inputs with the following convention: 1) a Command Number and 2) a Function key input.

The MIC612 uses the PRESET command key to save and recall presets (pre-positions) 1 through 99.

NOTICE!

To save a preset, enter the desired number and hold the PRESET key for approximately two

(2) seconds. To recall a preset, enter the desired preset number (or command) and momentarily press and release the PRESET key.

F.01U.249.416 2.0 2012.09

Installation Manual

Bosch Security Systems, Inc.

Page 31 Page 33
Image 32
Page 31 Page 33
Contents MIC612 Thermal Camera Page Table of Contents Common User Commands Advanced FeaturesOn-Screen Display OSD Menus Bosch Protocol On-Screen Display OSD Menus Pelco ProtocolMaintenance and Troubleshooting Keyboard Commands By Number IndexSafety Important Safety InstructionsAbout this Manual Conventions in this ManualMIC612 Thermal Camera Safety en EC Directives Important NoticesCoax grounding Informations FCC ET Ices applications commerciales FCC and Ices ComplianceFCC ET Ices Information commercial applications USA Customer Support and ServiceBosch Notices Parts List 2UnpackingAdditional Products Required Additional Tools RequiredInstallation Overview MIC camera mounting positions Upright, InvertedTypical Mounting Arrangements Number DescriptionMounting Positions About Alarm Inputs and Outputs An 8-input alarm card installed in the MIC PSUAlarm Card Number Installed? Alarm Inputs Alarm Outputs 3About the MIC Shielded Composite CableMIC-BP4 sold separately InstallationTypical Installation Configurations Follow these steps in sequence to install the MIC612 camera Overview of Installation StepsExample 2 Configuration with RS-485 protocol connection Mounting the Camera Installing the MIC Power Supply Unit PSU Earth Link on PCB Fuse Ratings3Layout of MIC Power Supply Units PSUs for MIC612 4Installation Instructions Electrical Shock HazardNumber Description PCB Marking Description AUX2 Number Description Cable Gland SizeAUX1 MIC612 Thermal Camera Installation en Power supply. Follow these steps Disconnect the power supply from the power sourceCommissioning the Camera with Heater Option Fitted LED DescriptionFitting the Optional Sunshield MIC612 Bottom half of the sunshield see stepHead is facing up ScrewdriverEstablishing Control of the Camera via Biphase Protocol Getting StartedEstablishing Control of the Camera Establishing Control of the Camera via RS-485 ProtocolPowering On Controlling the CameraBasic Keyboard Operation LCDNavigating the On-Screen Display OSD Menus Keyboard Commands, Bosch Protocol4Keyboard Commands, Pelco Protocol Preset 4Setting the Addresses of the Two Cameras of the MIC612Special Preset Commands, Pelco Protocol Setting the Address of the Optical Camera via FastAddress FastAddress, Bosch Protocol3FastAddress, Pelco Protocols To set an address for a camera without an addressTo change or clear an address for a camera with an address To set FastAddress with a Pelco KeyboardSetting Passwords Configuring the Camera for Inverted OperationActive Commands in FastAddress Special PasswordsSetup Menu 6On-Screen Display OSD Menus Bosch ProtocolCamera Setup Menu ATWWDR Thermal Camera Setup Menu Lens Setup Menu ManualPTZ Setup Menu Display Setup Menu Display Adjust Camera OSDAzimuth CompassCommunication Setup Menu Communication SetupAutoBaud Baud RateAlarm Setup NoneOutputs Setup Submenu Outputs Setup Submenu ChoicesOutputs OSDRule Setup Submenu Rule SetupRule Setup Submenu Choices Rule # Choices EnabledOutput Language MenuInput Diagnostics Menu BistSecurity Access Ctfid AccessPower Up Events Internal HumidityAlarm Status Submenu Alarm InputAlarm Output Total Time OnOn-Screen Display OSD Menus Pelco Protocol Camera Setup Pelco menu Bosch menu Setup MenuBosch Menu ContinuousPTZ Setup WhiteOutdoor BalanceOther Menus OFFSwitching Video Displaying Thermal Camera TemperatureOperation of the Thermal Camera Flat-Field Correction FFCTriggering Alarms On Detection of Objects Outside of Set Thermal Temperature ThresholdSet the Temperature Threshold Set the Alarm RuleCommon User Commands Setting AutoPan ModeSetting Preset Shots Specifying a Shot or a Sector TitleConfiguring Preposition Tours Programming the Inactivity OperationUsing the Wiper/Washer Recording ToursAdvanced Features 10.1 Alarm Rules10.1.1 Controlling Alarm Rules 10.1.2 Alarm Rule ExamplesExample 2 Advanced Alarm Rule 10.2 Privacy Masking10.5.1 Setting the Azimuth Zero Point 10.3 Image Stabilization10.4 Pre-position Tour 10.5 Azimuth, Elevation, and Compass Directions10.5.2 Displaying Azimuth, Elevation, and Compass Headings 180 / -45 S11Maintenance and Troubleshooting Problem Explanation SolutionCommands, Optical Camera Keyboard Commands By NumberKeyboard Commands Bosch Protocol Zone/Sector Title Menu Enters the Zone Title menu. Refer to Refer to .5 Azimuth, Elevation, Compass Directions,Commands, Thermal Camera 70 en MIC612 Thermal Camera Keyboard Commands Pelco Protocol Keyboard User Action Description CommandEn MIC612 Thermal Camera Pre-compensation 39 sharpness 38 shutter White balance Index#-ENTER En Index MIC612 Thermal Camera Constant focus 41 manual focus 41 spot focus Custom tour PTZShot Zero panPage Page Bosch Security Systems, Inc

MIC612 specifications

The Bosch Appliances MIC612 is an innovative and highly efficient piece of kitchen equipment that enhances the culinary experience for home chefs and professionals alike. Renowned for its quality, Bosch has developed this compact microwave that combines advanced technology with user-friendly features.

One of the standout characteristics of the MIC612 is its sleek design, seamlessly incorporating into various kitchen styles. With its stainless-steel finish, the microwave not only offers aesthetic appeal but also ensures durability and easy maintenance. Its compact size makes it an ideal fit for smaller kitchens or areas where space is limited, while still providing ample cooking capacity.

The MIC612 is equipped with intelligent cooking technology. This includes sensor cooking, which automatically adjusts cooking time and power levels based on moisture detected in the food. This feature simplifies meal preparation by eliminating the need for constant monitoring, ensuring perfectly cooked dishes every time. Additionally, the microwave offers multiple cooking modes, including reheating, defrosting, and cooking with precision.

For those who appreciate convenience, the MIC612 includes pre-programmed settings for common foods like popcorn, pizza, and baked goods. This allows users to enjoy a wide variety of meals with minimal effort. The intuitive control panel and clear digital display enhance the ease of use, enabling quick selection of settings and cooking times.

Safety is a paramount concern for Bosch, and the MIC612 does not disappoint. It features a child safety lock, ensuring that curious little hands cannot accidentally operate the appliance. Moreover, the design incorporates a reliable cooling system to prevent overheating and ensure longevity.

Energy efficiency is another highlight of the Bosch MIC612. It is designed to consume less power compared to traditional microwaves, making it an eco-friendly choice without compromising performance. The combination of cutting-edge technology, thoughtful design, and practical features makes the Bosch Appliances MIC612 a valuable addition to any kitchen, offering versatility and reliability for all cooking needs. Whether reheating leftovers or preparing a fresh meal from scratch, this microwave stands out as a remarkable option for modern culinary tasks.
Top Page Image Contents