Bosch Appliances MIC612 Setting Passwords, Configuring the Camera for Inverted Operation

Page 36

36 en Getting Started

MIC612 Thermal Camera

 

 

5.Use the joystick to enter the unique identifier for the camera.

–Move the joystick up or down to select the number.

–Move the joystick right to move to the next number position.

6.Move the joystick right to select Continue. Then, press the FOCUS or the IRIS button.

7.Use the keyboard to enter the FastAddress number. Then, press the Camera button. Note: To use a FastAddress number that is already assigned to a different camera, you must clear the number first.

8.Move the joystick down then up again to set the FastAddress number.

9.Press the FOCUS or the IRIS button to store the FastAddress number.

The on-screen display menu confirms that the camera stored the FastAddress number.

5.4.4

Active Commands in FastAddress

 

 

The table below identifies the commands that will work and those that will not when users

 

 

send commands via the FastAddress of the thermal camera:

 

 

 

 

 

 

 

Commands that will work

Commands that will not work

 

 

 

Pan, tilt

Menu commands

 

 

 

Thermal camera commands

Visible camera commands

 

 

 

Certain Aux commands

Certain Aux commands

 

 

 

(list to be populated)

 

 

5.5

Setting Passwords

 

Passwords are used to control access to locked command menus. Unlocked commands are

 

available to all users. Passwords are four (4) digits in length.

5.5.1

Special Passwords

 

The table below identifies special passwords adn their function and security level.

 

Password

Function / Security Level

 

0000 (default)

Enables security and requires a user to enter the unlock command

 

 

OFF-90-ENTERbefore invoking a locked command.

 

9999

Disables all security and allows all users to access locked commands.

5.5.2

Setting Passwords, Bosch Protocol

 

To set or change a password (locked command):

1.Press OFF-90-ENTERto turn off the command lock.

2.Press SET-802-ENTERto access the password menu.

3.Tilt the joystick up or down to choose a number. Tilt the joystick right to move to the next number position.

4.Follow the on-screen instructions and save the password. You receive an on-screen confirmation.

5.6

Configuring the Camera for Inverted Operation

The video display from a camera installed in inverted position will appear upside down until you set the video orientation to “Inverted position.” Follow these steps:

1.Access the main Setup Menu of the on-screen display (OSD). The screen Setup Menu appears.

2.Select the submenu “PTZ Setup.” The screen PTZ Setup appears.

3.Select the option “Orientation.”

4.Select the value “Inverted,” which rotates the video 180°. The video should now appear upright.

F.01U.249.416 2.0 2012.09

Installation Manual

Bosch Security Systems, Inc.

Page 35 Page 37
Image 36
Page 35 Page 37
Contents MIC612 Thermal Camera Page Table of Contents Common User Commands Advanced FeaturesOn-Screen Display OSD Menus Bosch Protocol On-Screen Display OSD Menus Pelco ProtocolMaintenance and Troubleshooting Keyboard Commands By Number IndexSafety Important Safety InstructionsAbout this Manual Conventions in this ManualMIC612 Thermal Camera Safety en EC Directives Important NoticesCoax grounding FCC and Ices Compliance FCC ET Ices Information commercial applicationsInformations FCC ET Ices applications commerciales Customer Support and Service Bosch NoticesUSA Parts List 2UnpackingAdditional Products Required Additional Tools RequiredInstallation Overview MIC camera mounting positions Upright, InvertedTypical Mounting Arrangements Number DescriptionMounting Positions About Alarm Inputs and Outputs An 8-input alarm card installed in the MIC PSUAlarm Card Number Installed? Alarm Inputs Alarm Outputs 3About the MIC Shielded Composite CableInstallation Typical Installation ConfigurationsMIC-BP4 sold separately Overview of Installation Steps Example 2 Configuration with RS-485 protocol connectionFollow these steps in sequence to install the MIC612 camera Mounting the Camera Installing the MIC Power Supply Unit PSU Earth Link on PCB Fuse Ratings3Layout of MIC Power Supply Units PSUs for MIC612 4Installation Instructions Electrical Shock HazardNumber Description PCB Marking Description Number Description Cable Gland Size AUX1AUX2 MIC612 Thermal Camera Installation en Power supply. Follow these steps Disconnect the power supply from the power sourceCommissioning the Camera with Heater Option Fitted LED DescriptionFitting the Optional Sunshield MIC612 Bottom half of the sunshield see stepHead is facing up ScrewdriverEstablishing Control of the Camera via Biphase Protocol Getting StartedEstablishing Control of the Camera Establishing Control of the Camera via RS-485 ProtocolPowering On Controlling the CameraBasic Keyboard Operation LCDKeyboard Commands, Bosch Protocol 4Keyboard Commands, Pelco ProtocolNavigating the On-Screen Display OSD Menus 4Setting the Addresses of the Two Cameras of the MIC612 Special Preset Commands, Pelco ProtocolPreset Setting the Address of the Optical Camera via FastAddress FastAddress, Bosch Protocol3FastAddress, Pelco Protocols To set an address for a camera without an addressTo change or clear an address for a camera with an address To set FastAddress with a Pelco KeyboardSetting Passwords Configuring the Camera for Inverted OperationActive Commands in FastAddress Special PasswordsSetup Menu 6On-Screen Display OSD Menus Bosch ProtocolCamera Setup Menu ATWWDR Thermal Camera Setup Menu Lens Setup Menu ManualPTZ Setup Menu Display Setup Menu Display Adjust Camera OSDAzimuth CompassCommunication Setup Menu Communication SetupAutoBaud Baud RateAlarm Setup NoneOutputs Setup Submenu Outputs Setup Submenu ChoicesOutputs OSDRule Setup Submenu Rule SetupRule Setup Submenu Choices Rule # Choices EnabledLanguage Menu InputOutput Diagnostics Menu BistSecurity Access Ctfid AccessPower Up Events Internal HumidityAlarm Status Submenu Alarm InputAlarm Output Total Time OnOn-Screen Display OSD Menus Pelco Protocol Camera Setup Pelco menu Bosch menu Setup MenuBosch Menu ContinuousPTZ Setup WhiteOutdoor BalanceOther Menus OFFSwitching Video Displaying Thermal Camera TemperatureOperation of the Thermal Camera Flat-Field Correction FFCTriggering Alarms On Detection of Objects Outside of Set Thermal Temperature ThresholdSet the Temperature Threshold Set the Alarm RuleCommon User Commands Setting AutoPan ModeSetting Preset Shots Specifying a Shot or a Sector TitleConfiguring Preposition Tours Programming the Inactivity OperationUsing the Wiper/Washer Recording ToursAdvanced Features 10.1 Alarm Rules10.1.1 Controlling Alarm Rules 10.1.2 Alarm Rule ExamplesExample 2 Advanced Alarm Rule 10.2 Privacy Masking10.5.1 Setting the Azimuth Zero Point 10.3 Image Stabilization10.4 Pre-position Tour 10.5 Azimuth, Elevation, and Compass Directions10.5.2 Displaying Azimuth, Elevation, and Compass Headings 180 / -45 S11Maintenance and Troubleshooting Problem Explanation SolutionKeyboard Commands By Number Keyboard Commands Bosch ProtocolCommands, Optical Camera Zone/Sector Title Menu Enters the Zone Title menu. Refer to Refer to .5 Azimuth, Elevation, Compass Directions,Commands, Thermal Camera 70 en MIC612 Thermal Camera Keyboard Commands Pelco Protocol Keyboard User Action Description CommandEn MIC612 Thermal Camera Index #-ENTERPre-compensation 39 sharpness 38 shutter White balance En Index MIC612 Thermal Camera Constant focus 41 manual focus 41 spot focus Custom tour PTZShot Zero panPage Page Bosch Security Systems, Inc

MIC612 specifications

The Bosch Appliances MIC612 is an innovative and highly efficient piece of kitchen equipment that enhances the culinary experience for home chefs and professionals alike. Renowned for its quality, Bosch has developed this compact microwave that combines advanced technology with user-friendly features.

One of the standout characteristics of the MIC612 is its sleek design, seamlessly incorporating into various kitchen styles. With its stainless-steel finish, the microwave not only offers aesthetic appeal but also ensures durability and easy maintenance. Its compact size makes it an ideal fit for smaller kitchens or areas where space is limited, while still providing ample cooking capacity.

The MIC612 is equipped with intelligent cooking technology. This includes sensor cooking, which automatically adjusts cooking time and power levels based on moisture detected in the food. This feature simplifies meal preparation by eliminating the need for constant monitoring, ensuring perfectly cooked dishes every time. Additionally, the microwave offers multiple cooking modes, including reheating, defrosting, and cooking with precision.

For those who appreciate convenience, the MIC612 includes pre-programmed settings for common foods like popcorn, pizza, and baked goods. This allows users to enjoy a wide variety of meals with minimal effort. The intuitive control panel and clear digital display enhance the ease of use, enabling quick selection of settings and cooking times.

Safety is a paramount concern for Bosch, and the MIC612 does not disappoint. It features a child safety lock, ensuring that curious little hands cannot accidentally operate the appliance. Moreover, the design incorporates a reliable cooling system to prevent overheating and ensure longevity.

Energy efficiency is another highlight of the Bosch MIC612. It is designed to consume less power compared to traditional microwaves, making it an eco-friendly choice without compromising performance. The combination of cutting-edge technology, thoughtful design, and practical features makes the Bosch Appliances MIC612 a valuable addition to any kitchen, offering versatility and reliability for all cooking needs. Whether reheating leftovers or preparing a fresh meal from scratch, this microwave stands out as a remarkable option for modern culinary tasks.
Top Page Image Contents