Bosch Appliances 4Setting the Addresses of the Two Cameras of the MIC612, Preset

Page 33

MIC612 Thermal CameraGetting Started en 33

Keyboard Command

User Action

Description

0-Pattern

Press

Initiates recording continuous playback based upon

 

 

current Recording setting (A or B) in the Setup Menu.

 

 

 

 

Press and hold

Initiates recording based upon current Recording

 

 

setting (A or B) in the Setup Menu. Press ACK to end

 

 

recording.

1-Pattern

Press

Initiate Recording A continuous playback.

 

Press and hold

Initiate Recording A. Press ACK to end recording.

 

 

 

2-Pattern

Press

Initiate Recording B continuous playback.

 

Press and hold

Initiate Recording B. Press ACK to end recording.

 

 

 

3-Pattern

Press

Initiate the MIC612 standard preset tour (Tour 1).

4-Pattern

Press

Initiate the MIC612 custom preset tour (Tour 2).

1 – Aux On / Aux Off

Press

Activates / deactivates alarm output 1.

 

 

This command is supported only if an 8-input alarm

 

 

card is installed in the PSU powering the camera.

 

 

 

2 – Aux On / Aux Off

Press

Activates / deactivates alarm output 2.

 

 

This command is supported only if an 8-input alarm

 

 

card is installed in the PSU powering the camera.

91 – Aux On

Press

Activate Zone Scan (display zone titles).

92 – Aux On

Press

Deactivate Zone Scan (re-move zone titles)

5.3.5

Special Preset Commands, Pelco Protocol

 

 

Some Pelco mode preset commands have a special meaning and override the normal Pelco

 

 

preset function as follows:

 

 

 

 

 

 

Preset Command

Description

 

 

33-PRESET

Pans the camera 180° (Flip).

 

 

34-PRESET

Goes to Zero Pan (original home position).

 

 

81-PRESET

Initiates Preset Tour 1.

 

 

82-PRESET

Initiates Preset Tour 2.

 

 

92-PRESET

Sets the Left pan limit for an AutoScan with Limit Stops enabled.

 

 

93-PRESET

Sets the Right pan limit for an AutoScan with Limit Stops enabled.

 

 

94-PRESET

Initiates a Preset Tour.

 

 

95-PRESET

Enables or disables Limit Stops in the Setup Menu for AutoScan.

 

 

 

Invokes the Pelco main Setup Menu when pressed for 2 seconds.

 

 

96-PRESET

Stops a scan.

 

 

97-PRESET

Initiates FastAddress (Pelco Random Scan).

 

 

99-PRESET

Starts an AutoScan.

 

 

 

 

NOTICE!

 

 

Some Pelco controllers do not support all of the preset command numbers. Consult the

 

documentation of the specific Pelco controller for supported preset commands.

5.4Setting the Addresses of the Two Cameras of the MIC612

After the camera is on, you must set the camera address. The optical camera and the thermal camera of the MIC612 have different addresses. The address of the optical camera is set via the OSD and FastAddress. The address of the thermal camera is set via the OSD and a unique address. From the factory, the default address of the optical camera is "0" and the default address of the thermal camera is the address of the optical camera + 1.

Bosch Security Systems, Inc.

Installation Manual

F.01U.249.416 2.0 2012.09

Page 32 Page 34
Image 33
Page 32 Page 34
Contents MIC612 Thermal Camera Page Table of Contents Advanced Features Common User CommandsOn-Screen Display OSD Menus Bosch Protocol On-Screen Display OSD Menus Pelco ProtocolIndex Maintenance and Troubleshooting Keyboard Commands By NumberImportant Safety Instructions SafetyAbout this Manual Conventions in this ManualMIC612 Thermal Camera Safety en Important Notices EC DirectivesCoax grounding FCC and Ices Compliance FCC ET Ices Information commercial applicationsInformations FCC ET Ices applications commerciales Customer Support and Service Bosch NoticesUSA 2Unpacking Parts ListAdditional Products Required Additional Tools RequiredMIC camera mounting positions Upright, Inverted Installation OverviewNumber Description Typical Mounting ArrangementsMounting Positions An 8-input alarm card installed in the MIC PSU About Alarm Inputs and OutputsAlarm Card Number Installed? Alarm Inputs Alarm Outputs 3About the MIC Shielded Composite CableInstallation Typical Installation ConfigurationsMIC-BP4 sold separately Overview of Installation Steps Example 2 Configuration with RS-485 protocol connectionFollow these steps in sequence to install the MIC612 camera Mounting the Camera Installing the MIC Power Supply Unit PSU Fuse Ratings Earth Link on PCB3Layout of MIC Power Supply Units PSUs for MIC612 Electrical Shock Hazard 4Installation InstructionsNumber Description PCB Marking Description Number Description Cable Gland Size AUX1AUX2 MIC612 Thermal Camera Installation en Disconnect the power supply from the power source Power supply. Follow these stepsCommissioning the Camera with Heater Option Fitted LED DescriptionBottom half of the sunshield see step Fitting the Optional Sunshield MIC612Head is facing up ScrewdriverGetting Started Establishing Control of the Camera via Biphase ProtocolEstablishing Control of the Camera Establishing Control of the Camera via RS-485 ProtocolControlling the Camera Powering OnBasic Keyboard Operation LCDKeyboard Commands, Bosch Protocol 4Keyboard Commands, Pelco ProtocolNavigating the On-Screen Display OSD Menus 4Setting the Addresses of the Two Cameras of the MIC612 Special Preset Commands, Pelco ProtocolPreset FastAddress, Bosch Protocol Setting the Address of the Optical Camera via FastAddressTo set an address for a camera without an address 3FastAddress, Pelco ProtocolsTo change or clear an address for a camera with an address To set FastAddress with a Pelco KeyboardConfiguring the Camera for Inverted Operation Setting PasswordsActive Commands in FastAddress Special Passwords6On-Screen Display OSD Menus Bosch Protocol Setup MenuATW Camera Setup MenuWDR Thermal Camera Setup Menu Manual Lens Setup MenuPTZ Setup Menu Display Setup Menu Camera OSD Display AdjustAzimuth CompassCommunication Setup Communication Setup MenuAutoBaud Baud RateNone Alarm SetupOutputs Setup Submenu Choices Outputs Setup SubmenuOutputs OSDRule Setup Rule Setup SubmenuRule Setup Submenu Choices Rule # Choices EnabledLanguage Menu InputOutput Bist Diagnostics MenuCtfid Access Security AccessPower Up Events Internal HumidityAlarm Input Alarm Status SubmenuAlarm Output Total Time OnOn-Screen Display OSD Menus Pelco Protocol Pelco menu Bosch menu Setup Menu Camera SetupBosch Menu ContinuousWhite PTZ SetupOutdoor BalanceOFF Other MenusDisplaying Thermal Camera Temperature Switching VideoOperation of the Thermal Camera Flat-Field Correction FFCThermal Temperature Threshold Triggering Alarms On Detection of Objects Outside of SetSet the Temperature Threshold Set the Alarm RuleSetting AutoPan Mode Common User CommandsSetting Preset Shots Specifying a Shot or a Sector TitleProgramming the Inactivity Operation Configuring Preposition ToursRecording Tours Using the Wiper/Washer10.1 Alarm Rules Advanced Features10.1.1 Controlling Alarm Rules 10.1.2 Alarm Rule Examples10.2 Privacy Masking Example 2 Advanced Alarm Rule10.3 Image Stabilization 10.5.1 Setting the Azimuth Zero Point10.4 Pre-position Tour 10.5 Azimuth, Elevation, and Compass Directions180 / -45 S 10.5.2 Displaying Azimuth, Elevation, and Compass HeadingsProblem Explanation Solution 11Maintenance and TroubleshootingKeyboard Commands By Number Keyboard Commands Bosch ProtocolCommands, Optical Camera Refer to .5 Azimuth, Elevation, Compass Directions, Zone/Sector Title Menu Enters the Zone Title menu. Refer toCommands, Thermal Camera 70 en MIC612 Thermal Camera Keyboard User Action Description Command Keyboard Commands Pelco ProtocolEn MIC612 Thermal Camera Index #-ENTERPre-compensation 39 sharpness 38 shutter White balance En Index MIC612 Thermal Camera Constant focus 41 manual focus 41 spot focus PTZ Custom tourZero pan ShotPage Page Bosch Security Systems, Inc

MIC612 specifications

The Bosch Appliances MIC612 is an innovative and highly efficient piece of kitchen equipment that enhances the culinary experience for home chefs and professionals alike. Renowned for its quality, Bosch has developed this compact microwave that combines advanced technology with user-friendly features.

One of the standout characteristics of the MIC612 is its sleek design, seamlessly incorporating into various kitchen styles. With its stainless-steel finish, the microwave not only offers aesthetic appeal but also ensures durability and easy maintenance. Its compact size makes it an ideal fit for smaller kitchens or areas where space is limited, while still providing ample cooking capacity.

The MIC612 is equipped with intelligent cooking technology. This includes sensor cooking, which automatically adjusts cooking time and power levels based on moisture detected in the food. This feature simplifies meal preparation by eliminating the need for constant monitoring, ensuring perfectly cooked dishes every time. Additionally, the microwave offers multiple cooking modes, including reheating, defrosting, and cooking with precision.

For those who appreciate convenience, the MIC612 includes pre-programmed settings for common foods like popcorn, pizza, and baked goods. This allows users to enjoy a wide variety of meals with minimal effort. The intuitive control panel and clear digital display enhance the ease of use, enabling quick selection of settings and cooking times.

Safety is a paramount concern for Bosch, and the MIC612 does not disappoint. It features a child safety lock, ensuring that curious little hands cannot accidentally operate the appliance. Moreover, the design incorporates a reliable cooling system to prevent overheating and ensure longevity.

Energy efficiency is another highlight of the Bosch MIC612. It is designed to consume less power compared to traditional microwaves, making it an eco-friendly choice without compromising performance. The combination of cutting-edge technology, thoughtful design, and practical features makes the Bosch Appliances MIC612 a valuable addition to any kitchen, offering versatility and reliability for all cooking needs. Whether reheating leftovers or preparing a fresh meal from scratch, this microwave stands out as a remarkable option for modern culinary tasks.
Top Page Image Contents