Bosch Power Tools 2000 Non-FireGroup, Pt Trbl Group, Restoral Group, Closing Group, Opening Group

2000 Series Program Entry Guide 4.0 Receiver

EN 19

3 Non-Fire Group

Default:			0
	Selection:		0 to 9, B to F
1 to 8		Non-Fire alarm from Points 1 to 24.
9 or 0			Non-Fire alarm from key A, B, or C.
			Refer to Section 7.0 ABC Keys.
			There are no Pulse Format versions of
			the Modem II Alarm recent Close,
			Alarm Cross Point, or Exit Alarm
			Reports. All occur as Alarm Reports.
			The Cross Point feature creates two
			point alarms. Refer to Section 11.0 Point
			Codes.

4 Pt Trbl Group

Default: 0

Selection: 0 to 9, B to F

1 to 8 Trouble, Missing, Bypass, or Swinger Bypass Reports from Fire and Non-Fire points combined.

Multiple trouble conditions can create duplicate Trouble Reports. For example, a point can send a trouble for a open sensor loop, then a trouble for missing.

5 Restoral Group

Default: 0

Selection: 0 to 9, B to F

1 to 8 Restoral on points 1 to 24, Fire and Non-Fire combined.

6 Closing Group

Default:	0
Selection:	0 to 9, B to F
0	Closing Report when a passcode is not
	required to turn system on (refer to
	Passcode Rquired prompt in Section

15.0 Passcodes) or a keyswitch is used.

1 to 8 Closing Report with User ID for users 1 to 8.

7 Opening Group

	Default:		0
	Selection:		0 to 9, B to F
0		Opening Report when keyswitch is
		used, or Part On No Delay, or Part On
		with delay.
	1 to 8	Opening Report with User ID for users
		1 to 8.
8 Cancel Group
	Default:		0
	Selection:		0 to 9, B to F
0		Cancel Report when keyswitch is used.
	1 to 8	Cancel Report with User ID for users 1
		to 8.

9 Sys Trbl Group

Default: 0

Selection: 0 to 9, B to F

1Reports an unsuccessful attempt to connect a remote programmer.

2Reports an unsuccessful attempt to connect a remote programmer.

3The system automatically reset. Call Bosch Security Systems if reports persist.

4Not used.

5 Not used.

6 Reports missing battery.

7 Reports low battery.

8No AC power to system. Control panel is running on battery.

9Communication Failure event for Phone 1.

B Communication Failure event for Phone 2.

C RF tamper (points or receiver).

D RF low battery.

E RF receiver 7 trouble.

F RF receiver 8 trouble.

Bosch Security Systems 7/05 35114F