BLACKHEAT® HE INSTALLATION OPERATION AND SERVICE MANUAL
SECTION 4: MAJOR COMPONENT DESCRIPTIONS
Burner (shown with Tube Gasket)
Must be installed with the flame observation window facing down.
Reflector (Aluminium or Stainless Steel)
Alternate overlap as shown on overview. Minimum overlap is 160 mm.
Burner Tube | Tube |
Supplied in 3000 mm lengths. | Heat treated aluminised tube |
Burner tube is always the first | supplied in 3000 mm lengths. |
tube after the burner. |
|
Tube and Reflector Hanger with Clamp Package
Position this hanger no more than 100 mm away from the burner assembly.
Tube and Reflector Hanger
Suspend system from these hangers.
Reflector Support Strap, Wire
Form & #8 x 3/4 Screw
Flex Gas Line
Tee
Assembly
Fan Tube with Internal Swirler
Supplied in 3000 mm lengths. Fan tube is always the last tube on the heater where the fan is attached.
The swirler is welded inside of the tube end.
Coupling Assembly with Lock
Reflector End Cap
Punch out center section to accommodate tube.
Fan Assembly (Includes Flange)
Fan assembly is attached to the last section of heat exchanger tubing (fan tube).
Damper Flange Assembly
For use on Multiburner Systems.
Fan Flange Assembly
and Screws
Support
Bracket
HeightS-hook Adjuster
Bow | Spring |
Shackle | Hook |
10 of 73