Delkin Devices EI - 25-1 manual Vent Gasket Connector Kit BCV4-KIT or BCV5-KIT

Page 31

EURO 25 -1

31

APPENDIX A

EURO 25-1- INSTRUCTIONS FOR

INSTALLATION INTO VENTED GAS FIREPLACES

VENTING OF THE EURO-25-1 INSIDE THE HOST GAS FIREPLACE

Aconnector kit (BCV4-KIT or BCV5-KIT) is used to connect the EURO 25-1 insert to the host gas fireplace’s venting system. The connector slips into the host fireplace’s B-vent.

• Follow the connector kit’s instructions in assembling the kit.

• Remove the flue adapter plate from the EURO 25-1 insert and attach the connector kit to the plate with the sheet metal screws provided.

• Slide the connector into the host gas fireplace’s vent.

• Slide the flue adapter plate onto the EURO 25-1 as it is being inserted into the host fireplace. Level the EURO 25-1 as described in manual.

• Complete the installation of the surround and accessories as described in the manual.

• Check for proper venting of the fireplace after installation.

*BCV4-KIT is the connector kit used for host fireplaces with 4” diameter flue connector and venting system. BCV5-KIT is for host fireplaces with 5” diameter flue connector and venting system. For venting systems larger than 5” diameter, run 4” diameter flexible aluminum gas liner from the insert through the host’s venting system to the host fireplace’s vent termination.

B-Vent

Gasket

Connector Kit (BCV4-KIT or BCV5-KIT)

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Euro 25 Page Introduction Euro 25 Table of Contents Safety General Information Installation CodesSpecifications High Altitude InstallationFront View Surround Sparker Removable Control Cover Appliance Description & DimensionsClearances to Combustibles Installation InstructionsInstallation Instructions 15 ¼ 387 mm Venting PrecautionsGAS Connections VentingAttachment of Fireplace Surround Spill Switch is Connected to the Appliance FACTORY-WIREDGlass Door Placement of Brick PanelsLOG Placement LOG Placement Euro 25 PIN Hole for LOG # Euro 25 Operation Instructions For Your SAFETY, Read Before Lighting Initial OperationTemporary SHUT-DOWN Procedure START-UP ProcedureComplete SHUT-DOWN Procedure Cleaning the Appliance MaintenanceSymptom Action TroubleshootingTroubleshooting Servicing Servicing Under WarrantyAdjusting Primary AIR Pilot AdjustmentValve Connections Replacement of FANConvertible Pilot Orifice Replacing GAS Component AssemblyReplacing Major GAS Components Changing Main Burner OrificeAppendix a Precautions½ to 7 ½ 15 ¼ 387 mm Vent Gasket Connector Kit BCV4-KIT or BCV5-KIT Sample Warning Label Sample Modification Warning PlateCanadian Heating Product Model Montigo 28 Series Installation InstructionsFirehearth / Monterey Model Firesong 220 Series Gasglo Model GG 28 Series Archgard T-100 Series FMI Model 850 Series Natural GAS Important InformationArchgard Limited Warranty Item # Description QTY Unit Replacement Parts for EuroEuro 25 Warranty Registration Beatty Drive MISSION, B.C. Canada
Top Page Image Contents