CFM Corporation DVT44IN Remote Control Transmitter Operating Instructions, On H/L, Mode, Chateau

Chateau™

Remote Control Transmitter

Operating Instructions

Introduction

This transmitter operating range is approximately 20 feet (6 m). The transmitter operates on one of 1,048,576 security codes that are programmed into the transmitter at the factory; this transmitter operates on radio frequencies with non-

Transmitter

On H/L	��
Button
Off	ON H/L
Continuous	OFF/CONTINUOUS
Pilot Button	PILOT BUTTON
Mode Button	MODE
	SET
Set Button

Wall Clip

Slot

Battery

Compartment

The transmitter operates on (2) 1.5V AAA batteries. It is recom- mended that ALKALINE batteries always be used for longer battery life and maximum operational performance.

Before using the transmitter, install the (2) AAA transmitter bat- teries into the battery compartment. (Use caution that batteries are installed in the proper direction.)

FP1818

ON H/L 1 Key Settings

OFF

Continuous 2

Pilot

MODE	3
SET	4

1. ON H/L	— Turns unit to ON and operates
	the flame control HI or LO.

2.OFF

CONTINUOUS PILOT — Shuts the unit OFF and acti-

		vates the continuous pilot on
		feature.
3.	MODE	— Changes unit from manual
		mode to thermostatic mode.
4.	SET	— Sets temperature in thermo
		mode.

LCD - Liquid Crystal Display

7

1

4

			1.	DISPLAY	Indicates CURRENT room temperature.
�����		2	2.	° F or ° C Indicates degrees Fahrenheit or Celsius
			3. FLAME		Indicates burner/valve in operation
			4.	ROOM	Indicates remote is in THERMOSTATIC mode
		3 5.		TEMP	Appears during manual operation
			6.	SET	Appears while setting the desired tem-
					perature in the thermostatic mode
����	��� ����	5	7.	PILOT	Appears in the Continuous Pilot mode

6

10 20011956