Nilfisk-ALTO SR 1900 manual Symbols

Page 4

A-4 / ENGLISH

CAUTIONS AND WARNINGS

SYMBOLS

Nilfisk-Advance uses the symbols below to signal potentially dangerous conditions. Always read this information carefully and take the necessary steps to protect personnel and property.

DANGER!

Is used to warn of immediate hazards that will cause severe personal injury or death.

WARNING!

Is used to call attention to a situation that could cause severe personal injury.

CAUTION!

Is used to call attention to a situation that could cause minor personal injury or damage to the machine or other property.

Read all instructions before using.

GENERAL SAFETY INSTRUCTIONS

Specific Cautions and Warnings are included to warn you of potential danger of machine damage or bodily harm.

DANGER!

*This machine emits exhaust gases (carbon monoxide) that can cause serious injury or death, always provide adequate ventilation when using machine.

WARNING!

*This machine shall be used only by properly trained and authorized persons.

*While on ramps or inclines, avoid sudden stops when loaded. Avoid abrupt sharp turns. Use low speed down hills. Clean only while ascending (driving up) the ramp.

*To avoid hydraulic oil injection or injury always wear appropriate clothing and eye protection when working with or near hydraulic system.

*Turn the key switch off (O) and disconnect the batteries before servicing electrical components.

*Never work under a machine without safety blocks or stands to support the machine.

*Do not dispense flammable cleaning agents, operate the machine on or near these agents, or operate in areas where flammable liquids exist.

*Only use the brushes provided with the appliance or those specified in the instruction manual. The use of other brushes may impair safety.

CAUTION!

*This machine is not approved for use on public paths or roads.

*This machine is only approved for hard surface use.

*This machine is not suitable for picking up hazardous dust.

*When operating this machine, ensure that third parties, particularly children, are not endangered.

*Before performing any service function, carefully read all instructions pertaining to that function.

*Do not leave the machine unattended without first turning the key switch off (O), removing the key and applying the parking brake.

*Turn the key switch off (O) and remove the key, before changing the brushes, and before opening any access panels.

*Take precautions to prevent hair, jewelry, or loose clothing from becoming caught in moving parts.

*Before use, all doors and hoods should be properly latched.

*Do not use on surfaces having a gradient exceeding that marked on the machine.

*All doors and covers are to be positioned as indicated in the instruction manual before using the machine.

SAVE THESE INSTRUCTIONS

A-4- FORM NO. 56041656 - Exterra™ / SR 1900

revised 3/07

Image 4
Contents Exterra Table of Contents EnglishParts and Service English / A-3Introduction Name PlateSymbols Consignes DE Prudence ET DE Securite Symboles English / A-5Hopper Safety Support Towing or Pushing a Disabled MachineJacking the Machine Transporting the MachineEnglish / A-7 Cylinder ModelsKnow Your Machine English / A-9 10 / English OPERATOR’S CompartmentEnglish / A-11 Control Panel12 / English English / A-13 Operating the MachineBefore Starting the Machine Starting the Diesel EngineSweeping 14 / EnglishEmptying the Hopper English / A-15 Main Broom Maintenance To Adjust the Main Broom Height16 / English To Rotate or Replace the Main BroomEnglish / A-17 To adjust the Side Broom Side Broom Maintenance18 / English English / A-19 To replace the Side Broom20 / English Hopper Dust Control Filter Panel FilterEnglish / A-21 22 / English Circuit Breaker LocationEnglish / A-23 TroubleshootingTripping the Circuit Breakers 24 / English English / A-25 Model Exterra Cyl. Propane Cyl. GasolineEspañol ÍndiceEspañol / B-3 IntroducciónComponentes Y Servicio Placa DE IdentificaciónPrecauciones Y Advertencias Símbolos Revised 3/07Español / B-5 Soporte DE Seguridad DE LA Tolva Elevación DE LA MáquinaTransporte DE LA Máquina Remolque O Empuje DE LA Máquina EN Caso DE AveríaEspañol / B-7 Modelos DE 3 Cilindros Modelos DE 4 CilindrosConozca SU Máquina Revised 8/07Español / B-9 Conozca SU Máquina Continuación10 / Español Compartimiento DEL OperarioEspañol / B-11 Panel DE Control12 / Español Español / B-13 Funcionamiento DE LA MáquinaAntes DE Encender LA Máquina Encendido DEL Motor DieselBarrido 14 / EspañolVaciado DE LA Tolva Español / B-15 16 / Español Mantenimiento DEL Cepillo PrincipalPara cambiar el cepillo principal o darle la vuelta Para ajustar la altura del cepillo principalFigura Español / B-17Mantenimiento DEL Cepillo Lateral 18 / EspañolPara ajustar el cepillo lateral Español / B-19 Para cambiar el cepillo lateral20 / Español Filtro DE Control DE Polvo DE LA Tolva Filtro DEL PanelPara retirar el filtro de control de polvo de la tolva Método BEspañol / B-21 22 / Español Ubicación DE LOS DisyuntoresLocalización DE Averías Español / B-23Desconexión DE LOS Disyuntores 24 / Español Español / B-25 Cil. GasolinaPage Page 2008

SR 1900 specifications

The Nilfisk-ALTO SR 1900 is a powerful and versatile scrubber dryer designed to meet the cleaning needs of various commercial environments. Known for its efficiency, durability, and advanced features, the SR 1900 is ideal for maintaining cleanliness in areas such as shopping malls, warehouses, and large retail spaces.

One of the key features of the SR 1900 is its robust cleaning performance. Equipped with a high-capacity dual brush system, the machine efficiently removes dirt and grime from all types of flooring surfaces. The adjustable brush pressure allows operators to customize the cleaning intensity based on the type of surface being cleaned, ensuring optimal results without damaging the floor.

The machine's ergonomic design is another standout characteristic. The user-friendly controls and intuitive layout allow for easy operation, even for those who are new to using scrubber dryers. The compact design ensures excellent maneuverability around tight corners and obstacles, enhancing productivity during cleaning tasks.

A notable technological advancement in the SR 1900 is its innovative water management system. This system regulates water usage, ensuring that the right amount of water is applied to the floor throughout the cleaning process. This not only conserves water but also reduces drying times, allowing foot traffic to resume quicker. Additionally, the SR 1900 features an adjustable squeegee that effectively collects dirty water, minimizing the risk of slips and falls.

The machine operates quietly, making it suitable for use in noise-sensitive environments. The low sound level means that cleaning can take place during business hours without disturbing customers or employees.

The SR 1900 is also designed with ease of maintenance in mind. Its removable tanks and accessible components simplify servicing, reducing downtime and ensuring that the machine remains in optimal working condition.

Overall, the Nilfisk-ALTO SR 1900 is an excellent choice for those looking for a reliable and efficient scrubber dryer. With its robust cleaning capabilities, ergonomic design, innovative technologies, and easy maintenance features, it stands out as a top-tier solution for cleaning professionals striving for high standards of cleanliness in demanding environments.