A-18 / ENGLISH
SIDE BROOM MAINTENANCE
To adjust the Side Broom...
1Drive the machine to an area with a level floor and set the parking brake.
2Pull the Main Broom Lever (B) back and slide to the right and up to lower the main and side brooms.
3See Figure 2. When in the Down position, the Side Broom (9) should be contacting the floor from the 10 O’Clock (A1) to the 3 O’Clock (A2) area shown.
4If it requires adjustment, turn the Side Broom Height Adjustment Knob (10) either clockwise to raise or
NOTE: The machine should be stored with the Side Broom (9) in the raised position. The Side Broom (9) should be replaced when the bristles are worn to a length of 3 inches (7.62 cm) or it becomes ineffective. The Side Broom height must be
FIGURE 2