USING THE WAND (OPTIONAL)
The Wand (13) is not supplied as a standard item in all variants of these machines. To use the wand:
1. Push the machine to upright locked position. The brush motor will then stop
Then slide the Wand out of its holder.
2. Use the wand for cleaning hard to reach places like floor corners, or furnitures.
IMPORTANT !
Foot pedal must be used to release base to operating/non operation position. Failure to do so could result in damage to 
the release mechanism.
1 | 2 |
|
|
|
|
|
1 |
| 2 |
|
|
|
|
|
|
3 | 3 |
USING THE TOOLS (OPTIONAL)
These tools are not standard items in all machine variants.
Use these tools for a better cleaning performance at hard to reach areas. A Crevice Tool (14) and Upholstery Tool (21) is placed conveniently on the machine, just behind the wand.
Remove the wand from the vacuum cleaner and you will have free access to the Tools.
1.The Upholstery Tool is placed in the upper section of the cleaner.
2.The crevice tool is placed in the lower section of the cleaner.
3.Install the Crevice Tool or Upholstery Tool on the end of the Wand, or on the end of the hose, which can be detached from the wand, if desired. Now the vacuum cleaner will have an extended coverage performance and can be used for cleaning hard to reach areas like roof strips, or furnitures.
IMPORTANT !
Foot pedal must be used to release base to operating/non operation position. Failure to do so could result in damage to 
the release mechanism.
10