Changing or Cleaning of the Brush

1.	Unplug the power cord from the electrical outlet.
2.	Release the brush roller by unlocking the bearing
	block. Push the button backwards left towards the
	unlocking symbol at the brush housing.
3.	Grasp at the bearing block and pull it out from the
	brush housing.
4.	Remove the used brush.
5.	Replace the used brush roller with a new one, or
	clean and remove all debris from the present brush.
6.	Slide back the brush into the the ﬁxed bearing block
	in the brush house.
7.	Push the bearing block in its position. Lock it by
	turning clockwise.

Always disconnect the power cord before performing any machine maintenance.

FILTERS - type of ﬁlter may vary from different models

On these machines there are two different ﬁlters; one pre-ﬁlter before the vacuum motor and one exhaust ﬁlter.

There are two different types of exhaust ﬁlters available to these machines, HEPA-ﬁlter and a standard exhaust ﬁlter. The HEPA-ﬁlter (High Efﬁciency Particulate Air ﬁlter) offers better ﬁltration capacity then the standard exhaust ﬁlter. The exhaust ﬁlters catches any dirt that may escape from the dust bag, or motor pre ﬁlter. Replace the motor pre ﬁlter every 5th time that the dust bag is changed (more often in very dusty applications). The exhaust ﬁlters are located at the front side of the machine just above the brush base. The HEPA ﬁlter can not be cleaned or washed clean. When the HEPA-ﬁlter is clogged it must be replaced. Replace the exhaust / HEPA ﬁlter 1-2 times per year depending on amount of use.

CHANGING THE HEPA-FILTER

		1.	Disconnect the power cord from the electrical outlet.
		1.	Disconnect the power cord from the electrical outlet.
			Push the Filter Cover Latch (19) downwards so that the
			cover (18) is released. Remove the ﬁlter cover from cleaner.
		2.	Grasp at the ﬁlter frame and remove the used and dirty
			HEPA-ﬁlter
		3.	Grasp at the ﬁlter frame and then insert the new HEPA ﬁlter
			to the cleaner by pushing it in place. (Never touch the ﬁlter
			media of a HEPA-ﬁlter! Doing so may cause a loss of
			performance of the HEPA-ﬁlter).
1	2		performance of the HEPA-ﬁlter).
1	2	4.	Snap the Filter Cover back in place at the cleaner.
		4.	Snap the Filter Cover back in place at the cleaner.

IMPORTANT!

Never operate the cleaner without the HEPA-Filter in place in the machine. Note! These machines are not designed for picking up hazardous - i.e. poisonous dust!