Daewoo Split Airconditioning System To Operate FAN only, To SET Unit to Dehumidifier Mode

Page 23

TO OPERATE FAN ONLY

To operate only the fan so the unit will circulate the air, proceed as follows:

1.Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the remote display.

3.To select a fan speed, press the FAN SPEED button until the desired speed appears in the display (see below).

2.Press the MODE button until the

Fan indicator appears in the display.

No allowance setting temperature

FAN SPEEDS

“ ”The fan will operate on low speed.

“ ”The fan will operate on medium speed.

“ ”The fan will operate on high speed. “NATURAL” The fan will randomly cycle through the

speeds simulating a breeze.

NOTE:

•If “NATURAL” is selected, the NATURAL” indicator on the indoor unit will light.

TO SET UNIT TO DEHUMIDIFIER MODE

Select this mode when there is high humidity. To select, follow the procedures below.

1.Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the remote display.

3. Using the TEMP. ▼or▲ but- tons, set the desired temper- ature. The desired tempera- ture can be changed up to 32°C and down to 18°C.

2.Press the MODE button until the

Dehumidifier indicator appears in the display.

22

Image 23

Contents DSB-071LH Important Notes Safety InstructionsContents Copper Tubing Basic AccessoriesAccessories Supplied with the Unit Wall Bracket Concrete Nails Remote ControllerDescription Qty Material Size Optional AccessoriesAccessories not Supplied with the Unit Accessories 1, 2, 3, 4, 5, 6, 7Overview Installation DiagramSelecting a Site InstallationInstalling the Wall Bracket Brown Blue Blue Black Yellow/Green Mounting the Indoor Unit Preparing the Copper Tubing not Included Connecting Copper TubesTo connect the copper tubes, follow the procedures below To connect the drain hose, follow the procedures below Connecting the Drain HoseBlack Tubing Leak Test AIR PurgingAIR Purging with Vacuum Pump Test RUN Finishing the job EvacuationPump Down Test RUNIndoor Unit Air Cleaning FiltersLCD Remote Controller Location of ControlsIndoor Unit Display Remote Display Remote ControllerOperation Connecting the AC CordSetting the Unit for Remote Operation Three Minute Compressor DelayCelsius to Fahrenheit Conversion Chart HOW to Install BatteriesFAN Speeds To SET the Unit to Auto ModeSET Unit to Quick Mode To SET Unit to Cool ModeTo Operate FAN only To SET Unit to Dehumidifier ModeTo Select the FAN Direction To SET Unit to Heat ModePlay. For example, if it is 800 P.M. To SET the on Timer ModeTo SET the OFF Timer Mode Press the Timer OFF button once to enter the Timer screenEmergency Operation To SET Unit to Sleep ModeTo Cancel Sleep Mode Insert cleaned or new black fil- ters back into the unit CHANGING/CLEANING the AIR FiltersCleaning the Indoor Cover Before the Season Care and MaintenancePrecautions After the SeasonPush EMERGENCY/REMOTE Troubleshooting GuideSymptoms Possible Cause Possible Solutions Model Specifications