TO SET UNIT TO HEAT MODE
To set the unit to heat the room to a desired temperature, follow the procedures below:
1.Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the remote display.
3.Using the TEMP. ▼or▲ but- tons, set the desired temper- ature. The desired tempera- ture can be changed up to 32°C and down to 18°C.
2.Press the MODE button until the Heat
indicator appears in the display. 
In the heat mode, the fan direction (UP, DOWN) is further downward
than that in the cool mode for the good circulation.
4.To select the fan speed, press the FAN SPEED button until the desired speed appears in the display (see
below).
NOTE:
When the heating orperation is started, hot air delivery might be delayed due to warm up period.
FAN SPEEDS
“AUTO”
“
”
“
”
“
” “NATURAL”
The fan will automatically select the fan speed.
The fan will operate on low speed. The fan will operate on medium speed. The fan will operate on high speed.
The fan will randomly cycle through the speeds simulating a cool breeze.
TO SELECT THE FAN DIRECTION
Regardless of the mode the unit is set for, the fan direction can be changed so it moves up and down, left and right or both. Follow procedures below to set fan direction.
1.Press the ON/OFF button on the remote control to turn the unit on; the On LED will light on the indoor unit and “ON” will light in the remote display.
3.Press the FAN DIR. button to select the fan direction. See chart below for detailed infor-
mation on each of the three | FAN DIR. | |
settings. | ||
|
2.Press the MODE button to select the desired mode.
FAN DIR. 
First Press
The air will flow up and down.
Second Press
Normal air direction.
23