Daewoo Split Airconditioning System To SET the on Timer Mode, To SET the OFF Timer Mode

Page 25

TO SET THE ON TIMER MODE

This unit can be set to automatically turn on after a predetermined amount of hours (up to 24) in the order of 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 5, 6, 8, 10, 12, 16, 20, 24.

1.Press the ON/OFF button of timer on the remote control to set the on timer mode, “HOUR” and “ON” on the remote display will be displayed and “TIMER” will be flicked. When you increase to press “ON/OFF” you will get desired time. Then, if pressing “ENTER/CANCEL” button, ON TIMER Mode will be started. If you want to stop ON TIMER Mode, please press “ENTER/CANCEL” again.

2. While the unit is off, press the TIMER ON button; the display will light waiting input for the timer, but the actual unit will not turn on.

3. Repeatedly press the TIMER ON button until the desired hour that you want the unit to turn on appears on the display. For example, if it is 1:00 P.M. and you want the unit to turn on at 4:00 P.M., select 3 hours.

5.Place the remote controller so it is facing the unit. When the de- sired hour is reached, the unit will turn on to the selected mode.

NOTE: Press the ENTER button within 5 seconds of selecting the desired time. If mote than 5 sec- onds elapse, steps 3 and 4 must be repeated.

4.Press the ENTER button to input the setting into memory; the unit will beep, the TIMER indicator will light on the unit and the TIMER indicator on the remote will light to indicate the unit is in the timer mode.

AUTO

TO SET THE OFF TIMER MODE

This unit can be set to automatically turn off after a predetermined amount of hours (up to 12) in the order of 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 11, 12.

1.Press the ON/OFF button of timer on the remote control to set the off timer mode, “HOUR” and “OFF” on the remote display will be displayed and “TIMER” will be flicked. When you increase to press “ON/OFF” you will get desired time. Then, if pressing “ENTER/CANCEL” button, OFF TIMER Mode will be started. If you want to stop OFF TIMER Mode, please press “ENTER/CANCEL” again.

2. Press the TIMER OFF button once to enter the Timer screen.

3. Repeatedly press the TIMER OFF but- ton until the desired hour that you want the unit to shut off appears on the dis-

play. For example, if it is 8:00 P.M. and

you want the unit to turn off at 10:00 P.M., select 2 hours.

5.Place the remote controller so it is facing the unit. When the desired hour is reached, the unit will turn off.

NOTE: Press the ENTER button within 5 seconds of se- lecting the desired time. If mote than 5 seconds elapse, steps 3 and 4 must be repeated.

AUTO

4.Press the ENTER button to input the set- ting into memory; the unit will beep, the TIMER indicator will light on the unit and the TIMER indicator on the remote will light to indicate the unit is in the timer mode.

AUTO

24

Image 25
Contents DSB-071LH Important Notes Safety InstructionsContents Accessories Supplied with the Unit Basic AccessoriesWall Bracket Concrete Nails Remote Controller Copper TubingAccessories not Supplied with the Unit Optional AccessoriesAccessories 1, 2, 3, 4, 5, 6, 7 Description Qty Material SizeOverview Installation DiagramInstalling the Wall Bracket InstallationSelecting a Site Brown Blue Blue Black Yellow/Green Mounting the Indoor Unit To connect the copper tubes, follow the procedures below Connecting Copper TubesPreparing the Copper Tubing not Included To connect the drain hose, follow the procedures below Connecting the Drain HoseBlack Tubing AIR Purging with Vacuum Pump Test RUN AIR PurgingLeak Test Finishing the job EvacuationPump Down Test RUNLCD Remote Controller Air Cleaning FiltersLocation of Controls Indoor UnitIndoor Unit Display Remote Display Remote ControllerSetting the Unit for Remote Operation Connecting the AC CordThree Minute Compressor Delay OperationCelsius to Fahrenheit Conversion Chart HOW to Install BatteriesSET Unit to Quick Mode To SET the Unit to Auto ModeTo SET Unit to Cool Mode FAN SpeedsTo Operate FAN only To SET Unit to Dehumidifier ModeTo Select the FAN Direction To SET Unit to Heat ModeTo SET the OFF Timer Mode To SET the on Timer ModePress the Timer OFF button once to enter the Timer screen Play. For example, if it is 800 P.M.To Cancel Sleep Mode To SET Unit to Sleep ModeEmergency Operation Cleaning the Indoor Cover CHANGING/CLEANING the AIR FiltersInsert cleaned or new black fil- ters back into the unit Precautions Care and MaintenanceAfter the Season Before the SeasonSymptoms Possible Cause Possible Solutions Troubleshooting GuidePush EMERGENCY/REMOTE Model Specifications