Daewoo Split Airconditioning System CHANGING/CLEANING the AIR Filters, Cleaning the Indoor Cover

Page 27

CHANGING/CLEANING THE AIR FILTERS

To change or clean the two black air filters, follow the procedures below:

1.Open the indoor unit’s cover and remove both black air filters by bending them slightly backward and the lifting out.

2.Remove the two small filters (Deodorizing and Electrostatic) from the indoor unit.

*This filters (Deodorizing and Electrostatic) are option.

3.Examine the filters and determine if they need to be cleaned or replaced. To clean filters, use a vacuum and clean off dust. Use water and mild soap also if necessary.

NOTES:

The filters should be changed every 6 months.If in a climate with cold winters, once a year is adequate.

After getting rid of vinyl in the filter (Deodorizing and Electrostatic), use it.

4.Insert cleaned or new small fil- ters (Deodorizing and Electrostatic) back into the unit.

5.Insert cleaned or new black fil- ters back into the unit.

CLEANING THE INDOOR COVER

To clean the indoor cover, follow the procedures below:

1. Remove the left and right side to open the indoor cover upward by two hands.

NOTE: Please remove and insert the indoor cov- er by two hands.

3. Remove the indoor cover.

3.(Remove it when cleaning.)

2.Pushing forward the indoor cover.

4. Cleaning the indoor cover.

NOTES:

Wipe the indoor cover with soft sponge or soft cloth.

When cleaning up it in the state of opening the indoor cover, wipe it with soft cloth.

After drying it completely in the shade, assemble it.

If you do not so, it may cause a trouble.

Reassemble the indoor cover is reverse process of assemble

26

Image 27
Contents DSB-071LH Important Notes Safety InstructionsContents Copper Tubing Basic AccessoriesAccessories Supplied with the Unit Wall Bracket Concrete Nails Remote ControllerDescription Qty Material Size Optional AccessoriesAccessories not Supplied with the Unit Accessories 1, 2, 3, 4, 5, 6, 7Overview Installation DiagramInstallation Installing the Wall BracketSelecting a Site Brown Blue Blue Black Yellow/Green Mounting the Indoor Unit Connecting Copper Tubes To connect the copper tubes, follow the procedures belowPreparing the Copper Tubing not Included To connect the drain hose, follow the procedures below Connecting the Drain HoseBlack Tubing AIR Purging AIR Purging with Vacuum Pump Test RUNLeak Test Finishing the job EvacuationPump Down Test RUNIndoor Unit Air Cleaning FiltersLCD Remote Controller Location of ControlsIndoor Unit Display Remote Display Remote ControllerOperation Connecting the AC CordSetting the Unit for Remote Operation Three Minute Compressor DelayCelsius to Fahrenheit Conversion Chart HOW to Install BatteriesFAN Speeds To SET the Unit to Auto ModeSET Unit to Quick Mode To SET Unit to Cool ModeTo Operate FAN only To SET Unit to Dehumidifier ModeTo Select the FAN Direction To SET Unit to Heat ModePlay. For example, if it is 800 P.M. To SET the on Timer ModeTo SET the OFF Timer Mode Press the Timer OFF button once to enter the Timer screenTo SET Unit to Sleep Mode To Cancel Sleep ModeEmergency Operation CHANGING/CLEANING the AIR Filters Cleaning the Indoor CoverInsert cleaned or new black fil- ters back into the unit Before the Season Care and MaintenancePrecautions After the SeasonTroubleshooting Guide Symptoms Possible Cause Possible SolutionsPush EMERGENCY/REMOTE Model Specifications