106, Re-EQ | Integra RDC-7.1 instruction

Listening Mode Setup—Continued

• When the “(Speaker A) Surr Back” is set to “Bi-Amp for Front” or “Not Used” in the Speaker Conﬁguration sub- menu, this option will not be displayed.

Dolby EX: Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Digital EX mode.

PL IIx Movie (Default): Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Movie mode.

•When you set the (Speaker A) Surr Back setting to “Main A 1ch (SBL)” in the Speaker Conﬁguration sub-menu, you cannot select “PLIIx Movie.”

PL IIx Music: Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Music mode.

NEO:6: Plays a 5.1ch source as a 6.1 or higher channel source using the DTS NEO:6 mode.

Off: Plays an original 5.1ch source as it is.

b. Re-EQ

This option allows you to conﬁgure whether the Re-EQ effect is applied or not when playing an analog multichannel source such as DVD-Audio and Super Audio CD. Use this effect when you do not want to overemphasize the treble sound.

Off (Default): The effect is not applied.

On: Adjusts the soundtrack in which the treble is overemphasized, so that the sound is optimized for home theater.

c. Front Speaker

This option conﬁgures the front speakers to use when the RDC-7.1 plays an analog multi channel source such as DVD-Audio and Super Audio CD. Select the speakers you want to use. This setting can be made when the “(Speaker B) Front L/R” is set to “Main A” in the Speaker Conﬁguration sub-menu.

A (Default): Outputs the source from the front speakers conﬁgured to “Speaker A.”

B:Outputs the source from the front speakers conﬁgured to “Speaker B.”

A+B: Outputs the source from the front speakers conﬁgured to “Speaker A” and “Speaker B.” Note that this option is not available when the front speakers are in Bi-amp conﬁguration.

d. Center Speaker

This option conﬁgures the center speaker to use when the RDC-7.1 plays an analog multichannel source such as DVD-Audio and Super Audio CD. Select the speaker you want to use. This setting can be made when the “(Speaker B) Center” is set to “Main A” in the Speaker Conﬁguration sub-menu.

A (Default): Outputs the source from the center speaker conﬁgured to “Speaker A.”

B:Outputs the source from the center speaker conﬁgured to “Speaker B.”

A+B: Outputs the source from the center speakers conﬁgured to “Speaker A” and “Speaker B.”

e. Surr L/R Sp

This option conﬁgures the surround speakers to use when the RDC-7.1 plays an input source such as DVD- Audio and Super Audio CD. Select the speakers you want to use. This setting can be made when the “(Speaker B) Surr L/R” is set to “Main A” in the Speaker Conﬁguration sub-menu.

A (Default): Outputs the source from the surround speakers conﬁgured to “Speaker A.”

B:Outputs the source from the surround speakers conﬁgured to “Speaker B.”

A+B: Outputs the source from the surround speakers conﬁgured to “Speaker A” and “Speaker B.”

f. Surr Bk Speaker

This option conﬁgures the surround back speakers to use when the RDC-7.1 plays an input source such as DVD- Audio and Super Audio CD. Select the speakers you want to use. This setting can be made when the “(Speaker

B)Surr Back” is set to “Main A” in the Speaker Conﬁguration sub-menu. However, when the “(Speaker

A)Surr Back” is set to “Bi-Amp for Front,” or “Not Used,” this setting will not be displayed.

• When the settings for “(Speaker A) Surr Back” and “(Speaker B) Surr Back” in the Speaker Conﬁguration sub-menu differ, the available options will be “A” and “B.”

A (Default): Outputs the source from the surround back speakers conﬁgured to “Speaker A.”

B: Outputs the source from the surround back speakers conﬁgured to “Speaker B.”

A+B: Outputs the source from the surround back speakers conﬁgured to “Speaker A” and “Speaker B.”

g. Subwoofer

This option conﬁgures the subwoofer to use when the RDC-7.1 plays an input source such as DVD-Audio and Super Audio CD. Select the terminal to which the subwoofer you want to use is connected. This setting can be made when the “(Speaker A) Subwoofer” is set to an option other than “Not Used” in the Speaker Conﬁguration sub-menu. However, when the “(Speaker

B)Subwoofer” is set to an option other than “Main A” in the Speaker Conﬁguration sub-menu, the available options will be “A” or “Not Used.”

A (Default): Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT A terminal.

B: Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT B terminal. A+B: Outputs the source from the subwoofers connected to the SUBWOOFER PRE OUT A and SUBWOOFER PRE OUT B terminals.

Not Used: No subwoofers are used for playback.