Integra RDC-7.1 instruction manual 118, Dolby Headphone Setup Sub-menu, Mode, Decode 2ch

Page 118

Listening Mode Setup—Continued

b. Front Speaker

This option configures the front speakers to use when playing the source. Select the speakers you want to use. This setting can be made when the “(Speaker B) Front L/R” is set to “Main A” in the Speaker Configuration sub-menu.

A (Default): Outputs the source from the front speakers configured to “Speaker A.”

B:Outputs the source from the front speakers configured to “Speaker B.”

A+B: Outputs the source from the front speakers configured to “Speaker A” and “Speaker B.” Note that this option is not available when the front speakers are in Bi-amp configuration.

c. Center Speaker

This option configures the center speaker to use when playing the source. Select the speaker you want to use. This setting can be made when the “(Speaker B)

Center” is set to “Main A” in the Speaker Configuration sub-menu.

A (Default): Outputs the source from the center speaker configured to “Speaker A.”

B:Outputs the source from the center speaker configured to “Speaker B.”

A+B: Outputs the source from the center speakers configured to “Speaker A” and “Speaker B.”

d. Surr L/R Sp

This option configures the surround speakers to use when playing the source. Select the speakers you want to use. This setting can be made when the “(Speaker B) Surr L/R” is set to “Main A” in the Speaker Configuration sub-menu.

A (Default): Outputs the source from the surround speakers configured to “Speaker A.”

B:Outputs the source from the surround speakers configured to “Speaker B.”

A+B: Outputs the source from the surround speakers configured to “Speaker A” and “Speaker B.”

e. Subwoofer

This option configures the subwoofer to use when playing the source. Select the terminal to which the subwoofer you want to use is connected. This setting can be made when the “(Speaker A) Subwoofer” is set to an option other than “Not Used” in the Speaker Configuration sub-menu. However, when the “(Speaker

B)Subwoofer” is set to an option other than “Main A” in the Speaker Configuration sub-menu, the available options will be “A” or “Not Used.”

A (Default): Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT A terminal.

B: Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT B terminal.

A+B: Outputs the source from the subwoofers connected to the SUBWOOFER PRE OUT A and SUBWOOFER PRE OUT B terminals.

Not Used: No subwoofers are used for playback.

In Zone 2, you can set the following options.

a. Mode

This option allows you to configure the width of a virtual sound image which is simulated using two speakers while you use the Dolby Virtual Speaker effect.

Wide: The breadth of the sound image is emphasized.

Reference (Default): The general 5.1 ch surround sound is simulated.

b. Decode (2ch)

This option allows you to select the decode mode before the Dolby Virtual Speaker effect is applied.

Dolby Pro Logic II: The Dolby Virtual Speaker effect is applied after the signal is decoded with Dolby Pro Logic II.

DTS NEO:6: The Dolby Virtual Speaker effect is applied after the signal is decoded with DTS NEO:6.

Dolby Headphone Setup Sub-menu

This sub-menu allows you to enable/disable the Dolby Headphone function when you use the headphones.

a. Mode

On (Default): Enables the Dolby Headphone function.

Off: Disables the Dolby Headphone function.

118

Image 118
Contents RDC-7.1 Important Safety Instructions AvisPrecautions Table of Contents Table of Contents Features Features THX Ultra2Connecting the Supplied Power Cord Supplied AccessoriesPrecautions during unpacking Using the Remote Controller Before Using the RDC-7.1Installing the Batteries Remote control sensor RDC-7.1 Standby indicatorIndex Parts and Facilities Front PanelIndex Parts and Facilities USA, Canadian, and Australian models Inner PanelZone 2 button Rec/Zone 3 button 70 European modelsPreset Button Setup / / /Enter/ / /ExitTuning Button Tuning Mode button 62Ethernet Net-Tune Rear PanelLink S400 Audio terminals USAFront Panel Display Remote Controller Amp Mode Pure a button Direct Tuning buttonSetup button Test Tone, CH SEL, Level- & Level + buttonsSpeaker Placement Front left and right speakersFront Left and Right Speakers, and Center Speaker Speaker PlacementPlacing the Speakers Left and Right Surround SpeakersCorner Room length Speaker Placement Suitable for THX AudioSubwoofer Layout with dipole speakersCh/6.1 ch/7 ch/7.1 ch with center speaker Ch/2.1 chCh/5.1 ch Ch/3.1 chMain room a Main room B Connection ExamplesMain room a Surr Back Bi-Amp Main room a Connecting a Power Amplifier Using RCA Type Cables Connecting a Power AmplifierPower amplifier Connecting the output terminal Connecting a Power AmplifierConnecting a Power Amplifier Using XLR Type Cables Disconnecting the output terminalBi-wiring-enabled speakers Using Bi-amp ConnectionHigh range Tweeter Low range Woofer Right speaker Connecting the Indoor FM Antenna Connecting AntennasAttach the FM antenna, as shown Connecting an Outdoor AM Antenna Connecting Antennas Connecting the AM Loop AntennaConnecting an Outdoor FM Antenna Using a TV/FM Antenna SplitterTypes of Connection Cables and Terminals Connecting AV ComponentsAudio cables Video cables Connecting AV ComponentsWrong Right For Main room B For Zone Connecting Monitors such as TV or ProjectorMonitor device such as TV Monitor device such as TV for ZoneConnecting a DVD Player DVD playerConnecting a DVD Recorder or Digital VCR Video Example for connecting with the Video 1 as inputConnecting a VCR Video 2, Video For digitalExample for connecting with the Video 3 as input Connecting a DBS Tuner, DBS TV, or BS/CS Tuner Example for connecting with the Video 4 as inputCD Player Connecting a CD Player, Turntable or TunerTurntable Cassette deck or DAT deck MD recorder or CD recorderHow to Make a Connection through the i.LINK Audio Interface What is i.LINKWhat is i.LINK Audio Copyright Protection SystemLINK-ready MD recorder Interconnection of i.LINK AUDIO-supported DevicesExample RDC-7.1 LINK-ready DVD player i.LINK-ready BS tuner Link AUDIO-ready DeviceHow to Configure i.LINK Connections Using Useful Functions While the i.LINK Connection is ReadyHow to Make a Connection through the Hdmi Interface Connection Using Hdmi TerminalsAbout the Hdmi High Definition Multimedia Interface DVD Player with Hdmi TV or ProjectorInput and Output Power on/ready function Connecting -compatible AV ComponentsConnections for Remote Control Power off functionEffective Sensor Layout Effective Sensor ConnectionsWire Flatblade Using an External Device with 12V Trigger TerminalWhen using the mini-jack 12V Trigger OUT E terminal USA and Canadian modelsOther than USA and Canadian models From connecting blockMaking Sensor Connections 200 mA If Remote Controller Signal Does not Reach Other ComponentsTerminal Other than USA Canadian models D and E 100 mATo Operate the RDC-7.1 AMP Mode Basic Operation of Remote Controller ButtonsTo Select an Input Source Customizing Your Remote Controller Basic Operation of Remote Controller ButtonsTo Operate a Connected Component Mode Switching To Select a Source in Zone 2 or ZoneTurning on the Power Connecting the Power/Basic OperationsOperating on the RDC-7.1 Operating with Remote Controller Connecting the Power/Basic OperationsTurning on the Power from the Remote Controller Temporarily Turning Off the Sound remote controller only Adjusting the Brightness of the Front DisplayListening with Headphones Using the Sleep Timer remote controller only Scroll wheel, and then press Switching the DisplayPress the Display button on Dialog normUsing the Re-EQ Function Changing the Audio Mode remote controller onlyUsing the Late Night Function Only in Dolby Digital Using the Listening Modes Types of Listening ModesUsing the Listening Modes IntegraRESEARCH’s Proprietary Listening Mode DSPTV Logic Listening Modes for Listeners Using HeadphonesDolby Headphone Operating with the Remote Controller Selecting the Listening ModeOperating on the RDC-7.1 Tuning into a Radio Station Using the TunerListening to Radio Broadcasts Erasing a Preset Radio Station Presetting a Radio StationSelecting a Preset Radio Station Listening to Radio BroadcastsListening to RDS Broadcasts Listening to RDS Broadcasts European models onlyPTY Program Types in Europe Performing a PTY Scan Listening to RDS Broadcasts European models onlyDisplaying Radio Text RT Performing a TP ScanHow to Connect How to Set UpEnjoying Multichannel Playback Enjoying Multichannel Playback Connecting and Setup Enjoying Movies and Music in the Remote Zone Zone 2/3Remote Zone When Connecting the Power Amplifier Zone 2 or ZoneEnjoying Movies and Music in the Remote Zone Zone 2/3 Enjoying Movies and Music in aAdjust the volume level Power on the devices in Zone 2 or ZoneSelect a source Audio Recording a SourceVideo Recording Audio/Video While Playing Recording a SourceRecording Audio/Video on a Component While Playing Another Press the Setup button to display Main Main a or Main B modeCheck connections and settings to Select Input SetupNetwork Requirements Connecting Net Audio USA, Canada, and Australian modelsAbout Net-Tune Internet RadioNetworking Your RDC-7.1 Net-Tune Central Editing Functions Connecting Net AudioOther than USA, Canada, and Australian models Computer RequirementsTo the LAN side port Room About Network ConfigurationLAN port Ethernet, etc TV CH Play button Up/Down/Left/Right / / / & Enter buttonsCH/Disc +/- button Previous/Next Buttons Stop buttonEnjoying Internet Radio Choosing a Preset Internet Radio Station Presetting Internet Radio StationsErasing a preset Internet radio station Turn on the Net-Tune server Press Button to playMusic file Turn on the RDC-7.1Playing a Music File At Random Selecting a Track ListPlaying a Music File Repeatedly Configuring the Music Server Music Server Memo Internet Radio Memo Setup Menu OSD Map Main aSetup Menu Reference Pages OSD Map Main BMain menu 100 102OSD Map Zone Navigating the Setup Menu Remote Control Setup Sub-menu Hardware SetupTV Format Sub-menu Speaker/Output Setup Speaker Configuration Sub-menuSpeaker Distance Sub-menu Speaker/Output SetupSpeaker Crossover Sub-menu Notch Filter Sub-menuTHX Audio Setup Sub-menu Level Calibration Sub-menuAnalog When nothing is connected Select Not UsedAudio Output Assign Sub-menu ExampleHdmi Out Video Output Assign Sub-menuOpt 1 Out, Opt 2 Out, Coax 1 Out, Coax 2 Out Composite Video 1-3, S-VideoInput Setup Analog Audio Input SetupAudio Assign Sub-menu when input is other than NET Audio MultichannelMusic Server Sub-menu When input is NET Audio Video Assign Sub-menuListening Mode Preset Sub-menu 100101 Character Edit Sub-menu102 IntelliVolume Sub-menuDelay Sub-menu 12V Trigger Assign Sub-menuMultiplex Setup Sub-menu Listening Mode SetupMono Setup Sub-menu 103104 Listening Mode SetupStereo Setup Sub-menu Multiplex Input ChannelMultichannel Input Setup Sub-menu Direct, Pure Audio Setup Sub-menu105 106 Re-EQ107 LINKIEEE1394DVD-Audio Input Setup Sub-menuLFE Level LINKIEEE1394SACD Input Setup Sub-menu 108Late Night Dolby Digital Setup Sub-menu109 Dolby EXDTS Setup Sub-menu 110AAC Setup Sub-menu 111112 Dolby Pro Logic IIx/DTS NEO6 2ch Input only Setup Sub-menu 113114 THX Setup Sub-menuTHX Mode 5ch Surround EXTHX Mode 2ch 115Front Effect All Ch Stereo Setup/Full Mono Setup Sub-menu116 Reverb LevelMode 2ch or 3ch only Dolby Virtual Speaker Setup Sub-menu117 Mode Dolby Headphone Setup Sub-menu118 Decode 2ch119 Audio AdjustTone Control Sub-menu Preference 120Link Setup 121IP Address Sub-menu Network Setup122 Proxy Sub-menuNetwork Setup Lock/Version Setup123 DVD Mode 124125 Previous/Next / buttons CD Mode126 FR/FF ButtonsRec button MiniDisc Mode127 Eject buttonRewind/FF Buttons Tape Mode128 Reverse Play buttonEntering a Remote Control Code Using the Remote Controller with Other Components129 130 Using the Remote Controller with Other ComponentsRemote Control Codes DVD DVD player131 CBL cable receiver132 SEI133 LXIControlling a Satellite Tuner 134Controlling a VCR Controlling a TV Remote controller mode for your cable135 Controlling a Cable ReceiverLearning Commands from Another Remote Controller 136137 Using MacrosMaking Macros Running Macros 138Naming Macros Adding New Remote Controller Modes Other Settings for the Remote ControllerEditing Remote Controller Modes Reordering the Remote Controller ModesAssigning Remote Controller Modes Other Settings for the Remote ControllerDeleting Remote Controller Modes 140Resetting the Remote Controller 141Changing the Remote Controller’s Control ID 142Relationship Between Input Source and Listening Mode 143Relationship Between Input Source and Listening Mode 144145 SacdUSA, Canada, and Australian models only Using the RDC-7.1 with Option Boards146 Types of the RDC-7.1 Option Boards147 Installing the Option Boards USA and Australian Models Only 148149 TroubleshootingPower Audio150 TroubleshootingRemote Controller VideoZone 2/Zone 151Recording Net-Tune152 Error MessagesSpecifications GeneralAmplifier Section 153Specifications USA and Canadian models Tuner Section154 Specifications Other than USA and Canadian models155 Onkyo Europe Electronics GmbH Onkyo Europe UK Office
Related manuals
Manual 8 pages 10.7 Kb