107, LINKIEEE1394DVD-Audio Input Setup Sub-menu

Listening Mode Setup—Continued

i.LINK(IEEE1394):DVD-Audio Input Setup Sub-menu

This sub-menu allows you to conﬁgure the audio effect and playback options when you play DVD-Audio that is input from the i.LINK(AUDIO) interface.

This sub-menu appears when the i.LINK(AUDIO) terminal board [A] is inserted.

a. LFE Level

This option allows you to set the bass level for the i.LINK(IEEE1394):DVD-Audio listening mode. The LFE level setting made here will be applied to all of the i.LINK(IEEE1394):DVD-Audio input signals. The available settings are –∞dB, –20 dB, –10 dB, and 0 dB. The option defaults to “0.”

b. SB Mode (5ch)

Selects the enhancement mode for playback when you play a 5.1ch source as a 6.1 or higher channel source through the RDC-7.1. The surround back setting you select here will be applied to the i.LINK(IEEE1394):DVD-Audio input signal “*/2.”

•When the “(Speaker A) Surr Back” is set to “Bi-Amp for Front” or “Not Used” in the Speaker Conﬁguration

sub-menu, this option will not be displayed. Dolby EX: Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Digital EX mode. PLIIx Movie: Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Movie mode.

•When you set the (Speaker A) Surr Back setting to “Main A 1ch (SBL)” in the Speaker Conﬁguration sub-menu, you cannot select “PLIIx Movie.”

PLIIx Music: Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Music mode.

NEO:6: Plays a 5.1ch source as a 6.1 or higher channel source using the DTS NEO:6 mode.

Off (Default): Plays an original 5.1ch source as it is.

c. Re-EQ

This option allows you to conﬁgure whether the Re-EQ effect is applied or not. Use this effect when you do not want to overemphasize the treble sound.

Off (Default): The effect is not applied.

On: Adjusts the soundtrack in which the treble is overemphasized, so that the sound is optimized for home theater.

d. Front Speaker

This option conﬁgures the front speakers to use when the RDC-7.1 plays DVD-Audio. Select the speakers you want to use. This setting can be made when the “(Speaker B) Front L/R” is set to “Main A” in the Speaker Conﬁguration sub-menu.

A (Default): Outputs the source from the front speakers conﬁgured to “Speaker A.”

B:Outputs the source from the front speakers conﬁgured to “Speaker B.”

A+B: Outputs the source from the front speakers conﬁgured to “Speaker A” and “Speaker B.” Note that this option is not available when the front speakers are in Bi-amp conﬁguration.

e. Center Speaker

This option conﬁgures the center speaker to use when the RDC-7.1 plays DVD-Audio. Select the speaker you want to use. This setting can be made when the “(Speaker B) Center” is set to “Main A” in the Speaker Conﬁguration sub-menu.

A (Default): Outputs the source from the center speaker conﬁgured to “Speaker A.”

B:Outputs the source from the center speaker conﬁgured to “Speaker B.”

A+B: Outputs the source from the center speakers conﬁgured to “Speaker A” and “Speaker B.”

f. Surr L/R Sp

This option conﬁgures the surround speakers to use	Menu
This option conﬁgures the surround speakers to use
when the RDC-7.1 plays DVD-Audio. Select the
speakers you want to use. This setting can be made	Setup
when the “(Speaker B) Surr L/R” is set to “Main A” in
the Speaker Conﬁguration sub-menu.
A (Default): Outputs the source from the surround
speakers conﬁgured to “Speaker A.”

B:Outputs the source from the surround speakers conﬁgured to “Speaker B.”

A+B: Outputs the source from the surround speakers conﬁgured to “Speaker A” and “Speaker B.”

g.Surr Bk Speaker

This option conﬁgures the surround back speakers to use when the RDC-7.1 plays DVD-Audio. Select the speakers you want to use. This setting can be made when the “(Speaker B) Surr Back” is set to “Main A” in the Speaker Conﬁguration sub-menu. However, when the “(Speaker A) Surr Back” is set to “Bi-Amp for Front” or “Not Used,” this setting will not be displayed.

• When the settings for “(Speaker A) Surr Back” and “(Speaker B) Surr Back” in the Speaker Conﬁguration sub-menu differ, the available options will be “A” and “B.”

A (Default): Outputs the source from the surround back speakers conﬁgured to “Speaker A.”

B:Outputs the source from the surround back speakers conﬁgured to “Speaker B.”

A+B: Outputs the source from the surround back speakers conﬁgured to “Speaker A” and “Speaker B.”