Ch/2.1 ch, Ch/5.1 ch, Ch/3.1 ch | Integra RDC-7.1 instruction

Speaker Placement—Continued

Available Speaker Placements According to the Number of Speakers

The following speaker placements will be available according to the number of speakers connected to the RDC-7.1. For the number of speaker channel, _.1 ch represents a subwoofer.

Key to abbreviations:

FL: Front left speaker, FR: Front right speaker, C: Center

speaker, SL: Surround left speaker, SR: Surround right

speaker, SBL: Surround back left speaker, SBR: Surround

back right speaker, SW: Subwoofer

2 ch/2.1 ch

		This placement is used with
	SW	two speakers (front left and
FL	FR	right speakers). It is
		right speakers). It is
		optimum for 2 ch sources

5 ch/5.1 ch

This placement is suitable for

				SW		playing 5.1 ch sources
						playing 5.1 ch sources
		FL	C	FR		including analog multichannel,
						including analog multichannel,
						Dolby Digital, DTS, and AAC
						format sources. When the
						source is 2 ch or mono, the
						signal will be decoded with
	SL				SR	signal will be decoded with
	SL				SR	Dolby Pro Logic II or DTS
						Dolby Pro Logic II or DTS
						NEO:6 format and played as
						5.1 ch sources.
						When the number of
channels in the source is 6.1 or greater, the surround

back signal will be distributed through the surround left and right speakers accordingly.

6 ch/6.1 ch/7 ch/7.1 ch (with center speaker)

including analog 2 ch, 2 ch

linear PCM, Dolby Digital,

DTS, DTS96/24, and AAC

format sources. When the

number of channels in the

source is 3.1 or greater, the

signals will be distributed

through the left and right channels accordingly.

3 ch/3.1 ch

This placement is suitable for playing 6.1 ch sources including DTS-ES Matrix/ Discrete and Dolby Surround EX format signals.

When you use two surround back speakers, the same signal will be output from them because the surround back channel is mono. When the source is 2 ch or mono, it will

and Connections

This placement is used with three speakers (front left, front right, and center speakers). When the number

be decoded with the Dolby Pro Logic IIx/DTS NEO:6 format and played as 6.1/7.1 ch sources.

Installation

of channels in the source is

4.1or greater, the signal for surround and surround back channels will be output through the front left and right speakers.

SL	SR
SBL	SBR

6 ch/6.1 ch/5 ch/5.1 ch (without center speaker)

4 ch/4.1 ch

This placement is suitable for playing 5.1 or 6.1 ch sources

In this placement, when the number of channels in the source is 5.1 or greater, the center channel signal will be output through the front left and right speakers, and the surround back channels will be output through the surround speakers.

SBL

SBR

when the surround back sound is much more preferred than the center sound with less speaker units than the normal conﬁguration. The center channel signal will be output through the front left and right speakers.

SL	SR
	SB