Integra RDC-7.1 instruction manual 154, Specifications Other than USA and Canadian models

Specifications – Other than USA and Canadian models –

General

Power Supply Rating:

European & Australian models:AC 230-240 V, 50 Hz

Asian models:AC 220-230 volts, 50 Hz

AC 120 V, 60 Hz

Consumption Power:

European & Australian models:100 W

Asian models:		100 W
Standby Power Consumption:		3.9 W
Dimensions (W ⋅ H ⋅ D):		450 ⋅ 197.3 ⋅ 477.1 mm
		(17 11/16" ⋅ 7 3/4" ⋅ 18 13/16")
Weight:		21.7 kg (47.8 lbs)
Inputs:
Audio
Multichannel (7.1ch) Inputs:		1
Phono (MM):		1
Line inputs:		9	(assignable)
Digital inputs Coaxial:		6
Digital inputs Optical:		6	(assignable)
Digital inputs AES/EBU		1
Video (Option)
Composite Video inputs:		6	(assignable)
S Video inputs:		6	(assignable)
Component Video RCA
inputs:		3
Component Video BNC
input:		1
Audio and Video
HDMI inputs (19-pin):		2
Miscellaneous
IR in (1/8-inch mini-jack): 3 (for Main, Zone 2 and Zone 3)
Outputs:
Audio
Balanced Pre out A:		Front L/R, Center, Surround L/R,
		Surround Back L/R, Subwoofer
Unbalanced Pre out A:		Front L/R, Center, Surround L/R,
		Surround Back L/R, Subwoofer
Unbalanced Pre out B:		Subwoofer
Headphones:		1
Line outputs:		5 (assignable to Recout, Zone 2 out
		and Zone 3 out)
Digital outputs Coaxial:		2 (assignable to Recout, Zone 2 out
		and Zone 3 out)
Digital outputs Optical:		2 (assignable to Recout, Zone 2 out
Video		and Zone 3 out)
Composite Video outputs:		3	(assignable to Monitor out A/B,
		Recout, Zone 2 out and Zone 3 out)
		1	(fixed, Monitor out A)
S Video outputs:		3	(assignable to Monitor out A/B
		and Recout)
		1	(fixed, Monitor out A)
Component Video RCA
outputs:		1
Component Video BNC
output:		1
Audio and Video
HDMI output (19-pin):		1
Miscellaneous
IR out (1/8-inch mini-jack): 3 (for Main, Zone 2 and Zone 3)
12V Trigger out (1/8-inch
mini-jack):		5	(for A, B, C, D, E)
Inputs/Outputs:
Miscellaneous
i. LINK(AUDIO) (4 pin):		2
Ethernet (Net-Tune):		1	(option)
	(1/8-inch mini-jack):	1
RS232 (9 pin D-SUB
Female connector):		1

Antennas:
FM:	75 ohms unbalanced
AM:	Included loop antenna and external
	terminal
AC Inlet:	1 (IEC type)

Amplifier Section

THD (Total Harmonic Distor-
tion):	0.05% (1 Vrms output)
Input Sensitivity and Impedance:
Audio	200 mV, 50 kΩ (AUDIO IN 1-9)
	2.5 mV, 50 kΩ (PHONO MM)
	200 mV, 50 kΩ (MULTI IN FR/FL/
	C/SR/SL/SBR/SBL)
	36 mV, 50 kΩ (MULTI IN SUB)
	0.5 Vp-p, 75 Ω (DIGITAL IN
	COAXIAL 1-6)
	1.3 Vp-p, 110 Ω (DIGITAL IN
	(balanced) AES/EBU)
Video (DVD, VIDEO 1-5)	1 Vp-p, 75 Ω (Composite Video)
	1 Vp-p, 75 Ω (S Video, Y signal)
	0.28 Vp-p, 75 Ω (S Video, C signal)
Component	1 Vp-p, 75 Ω (Y)
	0.7 Vp-p, 75 Ω (PB/CB, PR/CR)
Output Level and Impedance:
Audio	200 mV, 470 Ω (Tape 1/2/ Video
AUDIO 1-5:
	1/2/3 Rec Out)
	100 mV, 470 Ω (Zone 2/3 Out
	(fixed))
	1 V, 470 Ω (Zone 2/3 Out (variable))
PRE OUT A:	1 V, 470 Ω (Front L/R, CENTER,
	SURR L/R, SURR BACK or
	Zone 2 L/R, SUB WOOFER)
PRE OUT B:	1 V, 470 Ω (SUB WOOFER)
Video
VIDEO 1-4
(Composite Video):	1 Vp-p 75 Ω (Monitor Out A/B,
	Video 1/2/3 Rec Out, Zone 2/3
	Out)
VIDEO 1-4
(S Video, Y signal):	1 Vp-p, 75 Ω (Monitor Out A/B,
	Video 1/2/3 Rec Out)
VIDEO 1-4
(S Video, C signal):	0.28 Vp-p, 75 ohms (Monitor Out
	A/B, Video 1/2/3 Rec Out)
COMPONENT VIDEO:	1 Vp-p, 75 ohms (Y)
	0.7 Vp-p, 75 ohms (PB/CB, PR/CR)
Phono Overload:	120 mV RMS at 1,000 Hz, 0.5%
	THD
Frequency Response:
Audio (CD in Direct mode)	5 Hz-100 kHz: +1/–3 dB
Video Component	10 Hz-50 MHz: +1/–3 dB
RIAA Deviation:	20-20 kHz: ±0.8 dB
Tone Control:	±12 dB at 50 Hz (Bass)
	±12 dB at 1,000 Hz (Mid)
	±12 dB at 20,000 Hz (Treble)
S/N (Direct mode):	80 dB (PHONO, IHF A, 5 mV
	input)
	95 dB (LINE, IHF A, 0.5V input)
Muting:	Due to setup menu

154