110, DTS Setup Sub-menu | Integra RDC-7.1 manual

Listening Mode Setup—Continued

f. Front Speaker

This option conﬁgures the front speakers to use when playing the source in the Dolby Digital listening mode. Select the speakers you want to use. This setting can be made when the “(Speaker B) Front L/R” is set to “Main A” in the Speaker Conﬁguration sub-menu.

A (Default): Outputs the source from the front speakers conﬁgured to “Speaker A.”

B:Outputs the source from the front speakers conﬁgured to “Speaker B.”

A+B: Outputs the source from the front speakers conﬁgured to “Speaker A” and “Speaker B.” Note that this option is not available when the front speakers are in Bi-amp conﬁguration.

g. Center Speaker

This option conﬁgures the center speaker to use when playing the source in the Dolby Digital listening mode. Select the speaker you want to use. This setting can be made when the “(Speaker B) Center” is set to “Main A” in the Speaker Conﬁguration sub-menu.

A (Default): Outputs the source from the center speaker conﬁgured to “Speaker A.”

B:Outputs the source from the center speaker conﬁgured to “Speaker B.”

A+B: Outputs the source from the center speakers conﬁgured to “Speaker A” and “Speaker B.”

h. Surr L/R Sp

This option conﬁgures the surround speakers to use when playing the source in the Dolby Digital listening mode. Select the speakers you want to use. This setting can be made when the “(Speaker B) Surr L/R” is set to “Main A” in the Speaker Conﬁguration sub-menu.

A (Default): Outputs the source from the surround speakers conﬁgured to “Speaker A.”

B:Outputs the source from the surround speakers conﬁgured to “Speaker B.”

A+B: Outputs the source from the surround speakers conﬁgured to “Speaker A” and “Speaker B.”

i. Surr Bk Speaker

This option conﬁgures the surround back speakers to use when playing the source in the Dolby Digital listening mode. Select the speakers you want to use. This setting can be made when the “(Speaker B) Surr Back” is set to “Main A” in the Speaker Conﬁguration sub-menu. However, when the “(Speaker A) Surr Back” is set to “Bi-Amp for Front” or “Not Used,” this setting will not be displayed.

• When the settings for “(Speaker A) Surr Back” and “(Speaker B) Surr Back” in the Speaker Conﬁguration sub-menu differ, the available options will be “A” and “B.”

A (Default): Outputs the source from the surround back speakers conﬁgured to “Speaker A.”

B:Outputs the source from the surround back speakers conﬁgured to “Speaker B.”

A+B: Outputs the source from the surround back speakers conﬁgured to “Speaker A” and “Speaker B.”

j. Subwoofer

This option conﬁgures the subwoofer to use when playing the source in the Dolby Digital listening mode. Select the terminal to which the subwoofer you want to use is connected. This setting can be made when the “(Speaker A) Subwoofer” is set to an option other than “Not Used” in the Speaker Conﬁguration sub-menu. However, when the “(Speaker B) Subwoofer” is set to an option other than “Main A” in the Speaker Conﬁguration sub-menu, the available options will be “A” or “Not Used.”

A (Default): Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT A terminal.

B:Outputs the source only from the subwoofer connected to the SUBWOOFER PRE OUT B terminal. A+B: Outputs the source from the subwoofers connected to the SUBWOOFER PRE OUT A and SUBWOOFER PRE OUT B terminals.

Not Used: No subwoofers are used for playback.

DTS Setup Sub-menu

This sub-menu allows you to conﬁgure the audio effect and playback options when you play a source in the DTS listening mode.

a. LFE Level

This option allows you to set the bass level for the DTS listening mode. The LFE level setting made here will be applied to all of the DTS input signals. The available settings are –∞dB, –20 dB, –10 dB, and 0 dB. The option defaults to “0.” This option can also be set for Zone 2.

b. SB Mode (5ch)

This option allows you to select the enhancement mode for playback when you play a 5.1ch source as a 6.1 or higher channel source through the RDC-7.1. The surround back setting you select here will be applied to the DTS input signal “*/2.”

•When the “(Speaker A) Surr Back” is set to “Bi-Amp for Front” or “Not Used” in the Speaker Conﬁguration sub-menu, this option will not be displayed.

NEO:6: Plays a 5.1ch source as a 6.1 or higher channel source using the DTS NEO:6 mode.

Dolby EX: Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Digital EX mode. PLIIx Movie: Plays a 5.1ch source as a 6.1 or higher channel source using the Dolby Pro Logic IIx Movie mode.