Integra DTR-4.5 Connecting a VCR for Recording, Playback from the Recording VCR, VCR recording

Page 30

Connecting the AV receiver—Continued

Connecting a VCR for Recording

This section explains how to connect a VCR for recording from a TV or another VCR.

Video Connections

•Use an S-Video cable to connect the AV receiver’s S VIDEO 1 OUT jack to an S-Video input on the recording VCR. Use another S-Video cable to connect the AV receiver’s S VIDEO 3 IN jack to an S-Video output on your TV or playback VCR, as shown.

OR

•Use a composite video cable to connect the AV receiver’s V VIDEO 1 OUT jack to a composite video input on the recording VCR. Use another composite video cable to connect the AV receiver’s V VIDEO 3 IN jack to a composite video output on your TV or playback VCR, as shown.

Audio Connections

•Use an analog audio cable to connect the AV receiver’s VIDEO 1 OUT L/R jacks to an audio input on the recording VCR.

•Use an analog audio cable to connect the AV receiver’s VIDEO 3 IN L/R jacks to an audio output on your TV or playback VCR.

Playback from the Recording VCR

To play back a video in the recording VCR via the AV receiver:

• Use an S-Video cable to connect the AV receiver’s S VIDEO 1 IN jack to an S-Video output on the record- ing VCR.

OR

•Use a composite video cable to connect the AV receiver’s V VIDEO 1 IN jack to a composite video output on the recording VCR. And use an analog audio cable to connect the AV receiver’s VIDEO 1 IN L/R jacks to an audio output on the recording VCR.

Notes:

•The AV receiver must be turned on for recording. Recording is not possible while it’s in Standby mode.

•If you want to record directly from your TV or play- back VCR to the recording VCR without going through the AV receiver, connect the TV/VCR’s audio and video outputs directly to the recording VCR’s audio and video inputs. See the manuals supplied with your TV and VCR for details.

•Video signals connected to composite video inputs can only be recorded via composite video outputs. If your TV/VCR is connected to a composite video input, the recording VCR must be connected to a com- posite video output. Similarly, video signals con- nected to S-Video inputs can only be recorded via S-Video outputs. If your TV/VCR is connected to an S-Video input, the recording VCR must be connected to an S-Video output.

VCR (recording)

R

L

 

 

R

L

 

AUDIO

 

 

 

 

 

 

AUDIO

 

INPUT

 

 

 

OUTPUT

 

 

 

 

 

 

S VIDEO IN

VIDEO IN

VIDEO OUT

S VIDEO OUT

 

Connect one or the other

VIDEO 1

OUT IN

OUT IN

VIDEO 3

 

 

 

 

IN2

IN1

OUT

COAXIAL

 

 

 

 

 

 

 

 

 

DIGITAL

 

IN

 

COMPONENT VIDEO

RS232

OPTICAL

 

 

IN 2

IN 1

IN 3

IN 2

IN 1

OUT

 

 

 

 

 

 

Y

 

 

 

 

 

 

 

 

 

 

 

VIDEO 3

VIDEO 2

 

VIDEO 1

 

DVD

MONITOR

 

PRE OUT

 

 

 

IN

OUT

IN

OUT

IN

IN

OUT

 

 

 

 

 

 

 

 

 

 

 

V

 

 

P

 

 

 

 

 

 

 

 

 

 

SUB

 

 

 

 

 

 

 

 

 

 

WOOFER

 

 

 

 

 

 

 

 

 

S

 

 

P

 

 

 

 

 

 

 

 

 

 

 

IN

OUT

IN

IN

OUT

IN

OUT

IN

FRONT

SURR

CENTER

L ZONE 2

 

 

 

OUT

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REM

R

 

 

 

 

 

 

 

 

 

 

CON

 

 

 

 

 

 

 

 

 

 

SUB

R

CD

 

TAPE

VIDEO 3

VIDEO 2

 

VIDEO 1

 

 

DVD

WOOFER

 

IN

L

R

Connect one or the other

 

R

L

S VIDEO

AUDIO

 

OUT

OUTPUT

 

VIDEO

OUT: For recording : For playback

TV or VCR, etc.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents DTR-4.5 Important Safety Instructions AvisFor models having a power cord with a polarized plug PrecautionsPower FCC Information for UserMake sure you have the following accessories Supplied AccessoriesPrecautions If in any doubt, consult a qualified electricianAudio/Video FeaturesAmplifier FM/AM TunerTable of Contents Table of Contents Front & Rear Panels Front PanelFront & Rear Panels DisplayRS232 Rear PanelComponent Video in 1, 2, 3 27, 29 IR IN/OUTVideo 3 in 26 Optical Digital 26, 27, 29, 31, 32Coaxial Digital 26, 27, 29, 31, 32 Video 2 IN/OUT 28Remote indicator Remote ControllerReceiver Mode RC-587MRemote Controller DVD Mode CD Mode MD/CDR Mode Reverse Play button Tape ModeStop button Rewind & FF ButtonsInstalling the Batteries Using the Remote ControllerAbout Home Theater Enjoying Home TheaterOptical Digital Jacks Connecting the AV receiverAbout AV Connections AV Connection Color CodingConnecting the AV receiver Connecting Your SpeakersSpeaker Connection Precautions Connecting the Speaker CablesStrip about 5/8 15 mm Connecting the AM Loop Antenna Connecting AntennaConnecting the Indoor FM Antenna Attach the FM antenna, as shownConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaUsing a TV/FM Antenna Splitter Video Connection Formats Connecting Both Audio & VideoWhich Connections Should I Use? Audio Connection FormatsConnecting Your TV or Projector Monitor OutAudio Connections Video Connections Connecting a DVD PlayerUsing Analog Connections Your TV must also be connected via component videoConnecting a VCR for Playback Using a Multichannel ConnectionConnecting a D-VHS VCR for Playback Component VideoVCR recording Connecting a VCR for RecordingPlayback from the Recording VCR TV or VCR, etcUsing Optical or Coaxial Connections Satellite, cable, set-top box, LD player, etcConnecting a Cassette Recorder Connecting a CD Player CD playerAnalog Connections Connecting a DAT, CD, or MD RecorderUsing Optical or Coaxial Connections Playback only Digital RecordingTurntable with a Built-in Phono Preamp Connecting a TurntableConnecting Components Turntable without a Built-in Phono PreampConnecting the Power Cords of Other Components Turning On the AV receiverStandby/On Main menus First Time SetupAbout the Onscreen Setup Menus SubmenusFirst Time Setup Initial SetupDigital Input Buttons to select an input selec Component Video SetupMain menu appears onscreen Tor, and then use the LeftThen use the Left and Right Speaker SetupSpeaker Setup menu appears Buttons to selectDouble Bass DefaultCrossover Buttons to select d. SurroundSpeaker Distance menu appears Speaker DistanceTance, and then press Enter Buttons to specify the dis- tanceSpeaker Level Calibration Changing the TAPE/MD/CDR Display Repeat this step to select TAPE, MD, or CDRBasic Operation Selecting the Input SourceStart playback on the source component Using Headphones Setting the Display BrightnessUsing the Sleep Timer Basic OperationInput source as follows Displaying Source InformationYou can display various information about the current Interpreting Surround Channel ValuesListening to the Radio Using the TunerTuning into Radio Stations Use the Tuner input selectorDeleting Presets Presetting Radio StationsSelecting Preset Stations Displaying Radio InformationSee About the Listening Modes on page 51 for Selecting with the Remote ControllerSelecting on the AV receiver Detailed information about the listening modesAnalog Dolby D DTS/DTS 96/24*2 Input signal format DVD, LD, CD, etcAbout the Listening Modes Onkyo Original DSP ModesAdjusting the Bass & Treble Using the CinemaFILTERUsing the Late Night Function Dolby Digital only Advanced OperationAdjusting Individual Speaker Levels Advanced OperationRecording Recording AudioAV Recording Recording Separate AV SourcesAnalog/PCM Advanced SetupDecoder Setup Dolby DigitalAdvanced Setup Audio Adjust FunctionsTheater-Dimensional MonoPlii Music Assigning Listening Modes to Input Sources Use the Up and Down Buttons to select the signal forListening Mode Preset menu appears Virtual Surr LevelSetting Preferences IntelliVolumeVolume Setup 6-7., 6-8 V Trigger Setup OSD SetupRemote Setup Digital FormatTon, and then press the TV Input button Changing the Remote Controller’s IDPress and hold down the Receiver but Control IDUsing Only Speakers in Zone Connecting ZoneUsing a Receiver/Integrated Amp in Zone ZoneButtons to select a. Powered Hardware Setup menu appearsZone 2, and use the Left Zone 2 OUT L/R jacks can also be used as pre Setting the Zone 2 OutOuts Hardware Setup menu appears Buttons to select 3. HardwareUsing Zone Adjusting the Bass & Treble for Zone2 Using the Remote Control in ZoneUsing the 12V Trigger Using a Multiroom Kit with ZoneUsing a Multiroom Kit with a Cabinet Controlling Out-of-range ComponentsControlling Other Components Entering Remote Control CodesSetting the MD/CDR Button to CDR Codes for Integra DVD PlayersResetting Remote Mode Buttons Resetting the Remote ControllerControlling Other Components Remote Control Codes DVD DVD playerSAT satellite receiver CBL cable receiver ABCSBR NAD Controlling a TV Controlling a Cable ReceiverNumber Controlling a VCR Controlling a Satellite ReceiverRec ButtonsLearning Commands from Another Remote Controller Using Macros Making MacrosRunning Macros Troubleshooting Troubleshooting Can’t record? Remote controller doesn’t work?Can’t control other components? Zone 2 has turned off?Speaker distance cannot be set as required? Sound changes when I connect my head- phones?Speaker volume cannot be set as required? Display doesn’t work?Video Section SpecificationsAmplifier Section Tuner Section3 4 3 8 2

DTR-4.5 specifications

The Integra DTR-4.5 is a versatile and feature-rich AV Receiver designed to deliver an immersive home theater experience. At its core, this model exemplifies Integra's commitment to high-fidelity audio and video performance, making it an ideal choice for audiophiles and home cinema enthusiasts alike.

One of the standout features of the DTR-4.5 is its robust audio processing capabilities. The receiver supports Dolby Atmos and DTS:X, providing a three-dimensional soundstage that allows users to experience movies and music in a new light. The Advanced Digital Audio Processing ensures that every sound is rendered with clarity and precision, replicating the dynamics of a live performance.

In terms of connectivity, the DTR-4.5 is equipped with multiple HDMI inputs and outputs, supporting 4K Ultra HD video pass-through and scaling. This enables seamless integration with modern video sources and displays, allowing users to enjoy high-resolution content without compromising quality. The receiver also features HDCP 2.2 compatibility, ensuring it can support the latest streaming services and content protection standards.

For those who value convenience, the DTR-4.5 includes built-in Wi-Fi and Bluetooth functionality, allowing wireless streaming from various devices. Integra also provides an intuitive mobile app that enables users to control their AV system from their smartphones or tablets, further enhancing the user experience.

An essential characteristic of the DTR-4.5 is its room calibration technology. The Auto Room Acoustic Calibration system analyzes the acoustic property of the listening environment and adjusts settings accordingly. This ensures optimal sound distribution and compensates for room anomalies, providing a balanced audio experience regardless of the room configuration.

The construction of the DTR-4.5 reflects Integra's dedication to quality, featuring a solid chassis and premium components that minimize distortion and maximize performance. This attention to detail is evident not only in sound quality but also in the visual aesthetics of the unit, which complements modern home theaters beautifully.

Overall, the Integra DTR-4.5 is a powerhouse of an AV receiver, combining cutting-edge audio technology with user-friendly features. Its commitment to high-quality performance, modern connectivity options, and adaptability make it a standout choice for anyone looking to elevate their home entertainment experience. Whether for movies, music, or gaming, the DTR-4.5 delivers a captivating experience that is sure to impress.
Top Page Image Contents