Integra DTR-4.5 instruction manual Front & Rear Panels, Display

Page 9

Front & Rear Panels—Continued

SReturn button

This button is used to return to the previously dis- played onscreen setup menu.

TMaster Volume control (44)

This control is used to adjust the volume of the AV receiver to MIN, 1 through 99, or MAX

UPhones jack (45)

This 1/4-inch phone jack is for connecting a stan- dard pair of stereo headphones for private listening.

VTone, [–] & [+] buttons (52)

These buttons are used to adjust the bass and treble.

WInput selector buttons (44)

These buttons are used to select from the following input sources: Multi CH, DVD, VIDEO 1, VIDEO 2, VIDEO 3, TAPE, TUNER, or CD.

The [Multi CH] button selects the DVD analog mul- tichannel input.

Display

1 2 3

4

5

67

For detailed information, see the pages in parentheses.

1MUTING indicator (45)

This indicator flashes while the AV receiver is muted.

2REC OUT indicator (54)

7Message area

This area of the display shows various information about the currently selected source.

This indicator lights up when the REC OUT is selected.

3ZONE 2 indicator (66)

This indicator lights up when Zone 2 is selected.

4Listening mode & format indicators

These indicators show the currently selected listen- ing mode and the format of digital input signals.

5Tuning indicators (47)

TUNED: This indicator lights up when the AV receiver is tuned into a radio station.

AUTO: This indicator lights up when the Auto Tun- ing mode is selected, and disappears when the Man- ual Tuning mode is selected.

MEMORY: This indicator lights up when presetting radio stations.

FM STEREO: This indicator lights up when the AV receiver is tuned to a stereo FM station.

6SLEEP indicator (45)

This indicator lights up when the Sleep function has been set.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents DTR-4.5 Avis Important Safety InstructionsPower PrecautionsFor models having a power cord with a polarized plug FCC Information for UserPrecautions Supplied AccessoriesMake sure you have the following accessories If in any doubt, consult a qualified electricianAmplifier FeaturesAudio/Video FM/AM TunerTable of Contents Table of Contents Front Panel Front & Rear PanelsDisplay Front & Rear PanelsComponent Video in 1, 2, 3 27, 29 Rear PanelRS232 IR IN/OUTCoaxial Digital 26, 27, 29, 31, 32 Optical Digital 26, 27, 29, 31, 32Video 3 in 26 Video 2 IN/OUT 28Receiver Mode Remote ControllerRemote indicator RC-587MRemote Controller DVD Mode CD Mode MD/CDR Mode Stop button Tape ModeReverse Play button Rewind & FF ButtonsUsing the Remote Controller Installing the BatteriesEnjoying Home Theater About Home TheaterAbout AV Connections Connecting the AV receiverOptical Digital Jacks AV Connection Color CodingConnecting Your Speakers Connecting the AV receiverSpeaker Connection Precautions Connecting the Speaker CablesStrip about 5/8 15 mm Connecting the Indoor FM Antenna Connecting AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shownConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaUsing a TV/FM Antenna Splitter Which Connections Should I Use? Connecting Both Audio & VideoVideo Connection Formats Audio Connection FormatsConnecting Your TV or Projector Monitor OutAudio Connections Using Analog Connections Connecting a DVD PlayerVideo Connections Your TV must also be connected via component videoUsing a Multichannel Connection Connecting a VCR for PlaybackComponent Video Connecting a D-VHS VCR for PlaybackPlayback from the Recording VCR Connecting a VCR for RecordingVCR recording TV or VCR, etcSatellite, cable, set-top box, LD player, etc Using Optical or Coaxial ConnectionsCD player Connecting a Cassette Recorder Connecting a CD PlayerUsing Optical or Coaxial Connections Playback only Connecting a DAT, CD, or MD RecorderAnalog Connections Digital RecordingConnecting Components Connecting a TurntableTurntable with a Built-in Phono Preamp Turntable without a Built-in Phono PreampConnecting the Power Cords of Other Components Turning On the AV receiverStandby/On About the Onscreen Setup Menus First Time SetupMain menus SubmenusFirst Time Setup Initial SetupDigital Input Main menu appears onscreen Component Video SetupButtons to select an input selec Tor, and then use the LeftSpeaker Setup menu appears Speaker SetupThen use the Left and Right Buttons to selectCrossover DefaultDouble Bass Buttons to select d. SurroundTance, and then press Enter Speaker DistanceSpeaker Distance menu appears Buttons to specify the dis- tanceSpeaker Level Calibration Repeat this step to select TAPE, MD, or CDR Changing the TAPE/MD/CDR DisplayBasic Operation Selecting the Input SourceStart playback on the source component Using the Sleep Timer Setting the Display BrightnessUsing Headphones Basic OperationYou can display various information about the current Displaying Source InformationInput source as follows Interpreting Surround Channel ValuesTuning into Radio Stations Using the TunerListening to the Radio Use the Tuner input selectorSelecting Preset Stations Presetting Radio StationsDeleting Presets Displaying Radio InformationSelecting on the AV receiver Selecting with the Remote ControllerSee About the Listening Modes on page 51 for Detailed information about the listening modesDVD, LD, CD, etc Analog Dolby D DTS/DTS 96/24*2 Input signal formatOnkyo Original DSP Modes About the Listening ModesUsing the Late Night Function Dolby Digital only Using the CinemaFILTERAdjusting the Bass & Treble Advanced OperationAdvanced Operation Adjusting Individual Speaker LevelsRecording Audio RecordingRecording Separate AV Sources AV RecordingDecoder Setup Advanced SetupAnalog/PCM Dolby DigitalAudio Adjust Functions Advanced SetupTheater-Dimensional MonoPlii Music Listening Mode Preset menu appears Use the Up and Down Buttons to select the signal forAssigning Listening Modes to Input Sources Virtual Surr LevelSetting Preferences IntelliVolumeVolume Setup Remote Setup OSD Setup6-7., 6-8 V Trigger Setup Digital FormatPress and hold down the Receiver but Changing the Remote Controller’s IDTon, and then press the TV Input button Control IDUsing a Receiver/Integrated Amp in Zone Connecting ZoneUsing Only Speakers in Zone ZoneButtons to select a. Powered Hardware Setup menu appearsZone 2, and use the Left Outs Hardware Setup menu appears Setting the Zone 2 OutZone 2 OUT L/R jacks can also be used as pre Buttons to select 3. HardwareUsing Zone Using the 12V Trigger Using the Remote Control in ZoneAdjusting the Bass & Treble for Zone2 Using a Multiroom Kit with ZoneControlling Out-of-range Components Using a Multiroom Kit with a CabinetSetting the MD/CDR Button to CDR Entering Remote Control CodesControlling Other Components Codes for Integra DVD PlayersResetting Remote Mode Buttons Resetting the Remote ControllerControlling Other Components Remote Control Codes DVD DVD playerSAT satellite receiver ABC CBL cable receiverSBR NAD Controlling a Cable Receiver Controlling a TVRec Controlling a VCR Controlling a Satellite ReceiverNumber ButtonsLearning Commands from Another Remote Controller Using Macros Making MacrosRunning Macros Troubleshooting Troubleshooting Can’t control other components? Remote controller doesn’t work?Can’t record? Zone 2 has turned off?Speaker volume cannot be set as required? Sound changes when I connect my head- phones?Speaker distance cannot be set as required? Display doesn’t work?Amplifier Section SpecificationsVideo Section Tuner Section3 4 3 8 2

DTR-4.5 specifications

The Integra DTR-4.5 is a versatile and feature-rich AV Receiver designed to deliver an immersive home theater experience. At its core, this model exemplifies Integra's commitment to high-fidelity audio and video performance, making it an ideal choice for audiophiles and home cinema enthusiasts alike.

One of the standout features of the DTR-4.5 is its robust audio processing capabilities. The receiver supports Dolby Atmos and DTS:X, providing a three-dimensional soundstage that allows users to experience movies and music in a new light. The Advanced Digital Audio Processing ensures that every sound is rendered with clarity and precision, replicating the dynamics of a live performance.

In terms of connectivity, the DTR-4.5 is equipped with multiple HDMI inputs and outputs, supporting 4K Ultra HD video pass-through and scaling. This enables seamless integration with modern video sources and displays, allowing users to enjoy high-resolution content without compromising quality. The receiver also features HDCP 2.2 compatibility, ensuring it can support the latest streaming services and content protection standards.

For those who value convenience, the DTR-4.5 includes built-in Wi-Fi and Bluetooth functionality, allowing wireless streaming from various devices. Integra also provides an intuitive mobile app that enables users to control their AV system from their smartphones or tablets, further enhancing the user experience.

An essential characteristic of the DTR-4.5 is its room calibration technology. The Auto Room Acoustic Calibration system analyzes the acoustic property of the listening environment and adjusts settings accordingly. This ensures optimal sound distribution and compensates for room anomalies, providing a balanced audio experience regardless of the room configuration.

The construction of the DTR-4.5 reflects Integra's dedication to quality, featuring a solid chassis and premium components that minimize distortion and maximize performance. This attention to detail is evident not only in sound quality but also in the visual aesthetics of the unit, which complements modern home theaters beautifully.

Overall, the Integra DTR-4.5 is a powerhouse of an AV receiver, combining cutting-edge audio technology with user-friendly features. Its commitment to high-quality performance, modern connectivity options, and adaptability make it a standout choice for anyone looking to elevate their home entertainment experience. Whether for movies, music, or gaming, the DTR-4.5 delivers a captivating experience that is sure to impress.
Top Page Image Contents