Integra DTR-4.5 Supplied Accessories, Precautions, Make sure you have the following accessories

Page 4

Precautions—Continued

For British models

Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured mark- ings identifying the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

IMPORTANT

A 5 or 13 ampere fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replace- ment fuse has a rating of 5 or 13 amperes and that it is approved by ASTA or BSI to BS1362. Check for the ASTA mark or the BSI mark on the body of the fuse.

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMPERE SOCKET.

If in any doubt, consult a qualified electrician.

For European Models

Declaration of Conformity

We, ONKYO EUROPE ELECTRONICS GmbH

LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY

declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3.

GROEBENZELL, GERMANY

I. MORI

ONKYO EUROPE ELECTRONICS GmbH

Supplied Accessories

Make sure you have the following accessories:

Remote controller & three batteries (AA/R6)

Indoor FM antenna

AM loop antenna

Power cord

Front

Left

Front

Left

SP-B /Zone2

Left

SP-B /Zone2

Left

Front

Right

Front

Right

SP-B /Zone2

Right

SP-B /Zone2

Right

Surround

Left

Surround

Left

Surround

Right

Surround

Right

Center

Center

SurroundBack

Left

SurroundBack

Left

Zone2

Left

Zone2

Left

SurroundBack

Right

SurroundBack

Right

Zone2

Right

Zone2

Right

Front

Left

Front

Left

SP-B / Zone 2

Left

SP-B / Zone 2

Left

Front

Right

Front

Right

SP-B / Zone 2

Right

SP-B / Zone 2

Right

Surround

Left

Surround

Left

Surround

Right

Surround

Right

Center

Center

Surround Back

Left

Surround Back

Left

Zone 2

Left

Zone 2

Left

Surround Back

Right

Surround Back

Right

Zone 2

Right

Zone 2

Right

1

2

3

Speaker Cable

Speaker cable labels

*In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operation are the same regardless of color.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents DTR-4.5 Important Safety Instructions AvisPrecautions PowerFor models having a power cord with a polarized plug FCC Information for UserSupplied Accessories PrecautionsMake sure you have the following accessories If in any doubt, consult a qualified electricianFeatures AmplifierAudio/Video FM/AM TunerTable of Contents Table of Contents Front & Rear Panels Front PanelFront & Rear Panels DisplayRear Panel Component Video in 1, 2, 3 27, 29RS232 IR IN/OUTOptical Digital 26, 27, 29, 31, 32 Coaxial Digital 26, 27, 29, 31, 32Video 3 in 26 Video 2 IN/OUT 28Remote Controller Receiver ModeRemote indicator RC-587MRemote Controller DVD Mode CD Mode MD/CDR Mode Tape Mode Stop buttonReverse Play button Rewind & FF ButtonsInstalling the Batteries Using the Remote ControllerAbout Home Theater Enjoying Home TheaterConnecting the AV receiver About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting the AV receiver Connecting Your SpeakersConnecting the Speaker Cables Speaker Connection PrecautionsStrip about 5/8 15 mm Connecting Antenna Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shownConnecting an Outdoor AM Antenna Connecting an Outdoor FM AntennaUsing a TV/FM Antenna Splitter Connecting Both Audio & Video Which Connections Should I Use?Video Connection Formats Audio Connection FormatsMonitor Out Connecting Your TV or ProjectorAudio Connections Connecting a DVD Player Using Analog ConnectionsVideo Connections Your TV must also be connected via component videoConnecting a VCR for Playback Using a Multichannel ConnectionConnecting a D-VHS VCR for Playback Component VideoConnecting a VCR for Recording Playback from the Recording VCRVCR recording TV or VCR, etcUsing Optical or Coaxial Connections Satellite, cable, set-top box, LD player, etcConnecting a Cassette Recorder Connecting a CD Player CD playerConnecting a DAT, CD, or MD Recorder Using Optical or Coaxial Connections Playback onlyAnalog Connections Digital RecordingConnecting a Turntable Connecting ComponentsTurntable with a Built-in Phono Preamp Turntable without a Built-in Phono PreampTurning On the AV receiver Connecting the Power Cords of Other ComponentsStandby/On First Time Setup About the Onscreen Setup MenusMain menus SubmenusInitial Setup First Time SetupDigital Input Component Video Setup Main menu appears onscreenButtons to select an input selec Tor, and then use the LeftSpeaker Setup Speaker Setup menu appearsThen use the Left and Right Buttons to selectDefault CrossoverDouble Bass Buttons to select d. SurroundSpeaker Distance Tance, and then press EnterSpeaker Distance menu appears Buttons to specify the dis- tanceSpeaker Level Calibration Changing the TAPE/MD/CDR Display Repeat this step to select TAPE, MD, or CDRSelecting the Input Source Basic OperationStart playback on the source component Setting the Display Brightness Using the Sleep TimerUsing Headphones Basic OperationDisplaying Source Information You can display various information about the currentInput source as follows Interpreting Surround Channel ValuesUsing the Tuner Tuning into Radio StationsListening to the Radio Use the Tuner input selectorPresetting Radio Stations Selecting Preset StationsDeleting Presets Displaying Radio InformationSelecting with the Remote Controller Selecting on the AV receiverSee About the Listening Modes on page 51 for Detailed information about the listening modesAnalog Dolby D DTS/DTS 96/24*2 Input signal format DVD, LD, CD, etcAbout the Listening Modes Onkyo Original DSP ModesUsing the CinemaFILTER Using the Late Night Function Dolby Digital onlyAdjusting the Bass & Treble Advanced OperationAdjusting Individual Speaker Levels Advanced OperationRecording Recording AudioAV Recording Recording Separate AV SourcesAdvanced Setup Decoder SetupAnalog/PCM Dolby DigitalAdvanced Setup Audio Adjust FunctionsMono Theater-DimensionalPlii Music Use the Up and Down Buttons to select the signal for Listening Mode Preset menu appearsAssigning Listening Modes to Input Sources Virtual Surr LevelIntelliVolume Setting PreferencesVolume Setup OSD Setup Remote Setup6-7., 6-8 V Trigger Setup Digital FormatChanging the Remote Controller’s ID Press and hold down the Receiver butTon, and then press the TV Input button Control IDConnecting Zone Using a Receiver/Integrated Amp in ZoneUsing Only Speakers in Zone ZoneHardware Setup menu appears Buttons to select a. PoweredZone 2, and use the Left Setting the Zone 2 Out Outs Hardware Setup menu appearsZone 2 OUT L/R jacks can also be used as pre Buttons to select 3. HardwareUsing Zone Using the Remote Control in Zone Using the 12V TriggerAdjusting the Bass & Treble for Zone2 Using a Multiroom Kit with ZoneUsing a Multiroom Kit with a Cabinet Controlling Out-of-range ComponentsEntering Remote Control Codes Setting the MD/CDR Button to CDRControlling Other Components Codes for Integra DVD PlayersResetting the Remote Controller Resetting Remote Mode ButtonsControlling Other Components DVD DVD player Remote Control CodesSAT satellite receiver CBL cable receiver ABCSBR NAD Controlling a TV Controlling a Cable ReceiverControlling a VCR Controlling a Satellite Receiver RecNumber ButtonsLearning Commands from Another Remote Controller Making Macros Using MacrosRunning Macros Troubleshooting Troubleshooting Remote controller doesn’t work? Can’t control other components?Can’t record? Zone 2 has turned off?Sound changes when I connect my head- phones? Speaker volume cannot be set as required?Speaker distance cannot be set as required? Display doesn’t work?Specifications Amplifier SectionVideo Section Tuner Section3 4 3 8 2

DTR-4.5 specifications

The Integra DTR-4.5 is a versatile and feature-rich AV Receiver designed to deliver an immersive home theater experience. At its core, this model exemplifies Integra's commitment to high-fidelity audio and video performance, making it an ideal choice for audiophiles and home cinema enthusiasts alike.

One of the standout features of the DTR-4.5 is its robust audio processing capabilities. The receiver supports Dolby Atmos and DTS:X, providing a three-dimensional soundstage that allows users to experience movies and music in a new light. The Advanced Digital Audio Processing ensures that every sound is rendered with clarity and precision, replicating the dynamics of a live performance.

In terms of connectivity, the DTR-4.5 is equipped with multiple HDMI inputs and outputs, supporting 4K Ultra HD video pass-through and scaling. This enables seamless integration with modern video sources and displays, allowing users to enjoy high-resolution content without compromising quality. The receiver also features HDCP 2.2 compatibility, ensuring it can support the latest streaming services and content protection standards.

For those who value convenience, the DTR-4.5 includes built-in Wi-Fi and Bluetooth functionality, allowing wireless streaming from various devices. Integra also provides an intuitive mobile app that enables users to control their AV system from their smartphones or tablets, further enhancing the user experience.

An essential characteristic of the DTR-4.5 is its room calibration technology. The Auto Room Acoustic Calibration system analyzes the acoustic property of the listening environment and adjusts settings accordingly. This ensures optimal sound distribution and compensates for room anomalies, providing a balanced audio experience regardless of the room configuration.

The construction of the DTR-4.5 reflects Integra's dedication to quality, featuring a solid chassis and premium components that minimize distortion and maximize performance. This attention to detail is evident not only in sound quality but also in the visual aesthetics of the unit, which complements modern home theaters beautifully.

Overall, the Integra DTR-4.5 is a powerhouse of an AV receiver, combining cutting-edge audio technology with user-friendly features. Its commitment to high-quality performance, modern connectivity options, and adaptability make it a standout choice for anyone looking to elevate their home entertainment experience. Whether for movies, music, or gaming, the DTR-4.5 delivers a captivating experience that is sure to impress.
Top Page Image Contents