Integra DTR-4.5 instruction manual Assigning Listening Modes to Input Sources, Virtual Surr Level

Page 59

Advanced Setup—Continued

■e. Virtual Surr Level

With this setting, you can adjust the level of virtual sur- round sound from –3 dB to +3 dB (default is 0 dB). If the clarity is poor, or the effect sounds unnatural, you may be able to improve it by lowering this setting.

Assigning Listening Modes to Input Sources

You can assign a default listening mode to each input source that will be selected automatically when you select each input source. For example, you can set the default listening mode to be used with Dolby Digital input signals. You can select other listening modes dur- ing playback, but the mode specified here will be resumed once the AV receiver has been set to Standby.

1

 

Press the [Receiver] button fol-

Receiver

lowed by the [Setup] button.

 

 

The main menu appears onscreen.

4

Use the Up and Down [ ]/[

]

 

buttons to select the signal for-

Enter

mat that you want to set, and

 

 

then use the Left and Right [

]/

[ ] buttons to select a listening mode.

Only listening modes that can be used with each input signal format can be selected.

The Last Valid option means that the listening mode selected last will be used.

For “Surround”, the listening mode specified on pages 56, 57.

a. Ana/PCM: With this setting, you can specify the listening mode to be used when an analog (CD, TV, LD, VHS, MD, turntable, radio, cassette, cable, satellite, etc) or PCM digital (CD, DVD, etc) audio signal is played. b. Dolby D: With this setting, you can specify the listening mode to be used when a Dolby Digital format digital audio signal is played (DVD, etc).

2

Enter

Enter

Use the Up and Down []/[ ] buttons to select “5. Listening Mode Preset,” and then press [Enter].

The Listening Mode Preset menu appears.

Menu

------------------------

Basic Setup

5.Listening Mode Preset

1-----------------------.Initial Setup -

1.DVD/MULTICH

2.VIDEO1 Advanced Setup

3.VIDEO2 3.Surround Setup

4.VIDEO3 4.Audio Adjust

5.TAPE

5.Listening Mode Preset 6.TUNER

6.Preference

7.CD

c. DTS: With this setting, you can spec- ify the listening mode to be used when a DTS format digital audio signal is played (DVD, LD, CD, etc).

d. D.F. 2ch: With this setting, you can specify the listening mode to be used when a 2-channel (2/0) digital audio signal (Dolby Digital, DTS) is played (DVD, etc).

e. D.F. Mono: With this setting, you can specify the listening mode to be used when a mono digital audio signal is played (DVD, etc).

f. Multiplex: With this setting, you can specify the listening mode to be used when a multiplex audio signal is played.

3

Enter

Enter

Use the Up and Down []/[ ] buttons to select the input selec- tor that you want to set, and then press [Enter].

5-1.ListeningModePreset

-----DVD/MULTICH ------

a.Ana/PCM :Last Valid b.Dolby D :Last Valid

c.DTS

:Last Valid

d.D.F.2ch :Last Valid e.D.F.Mono:Last Valid f.Multiplex

:Last Valid g.Multich :Last Valid

For input selectors that have no digital input jacks, only “a. Analog” will be available.

g. Multich: This setting is available only when “5-1. DVD/MULTCH” is selected. With this setting, you can specify the listening mode to be used when the DVD analog multichannel input is used.

5

When you’ve finished, press the

 

 

[Setup] button.

 

The setup menu closes.

Note:

•This procedure can also be performed on the AV receiver by using its [Setup] button, arrow buttons, and [Enter] button.

59

Page 58 Page 60
Image 59
Page 58 Page 60
Contents DTR-4.5 Avis Important Safety InstructionsFCC Information for User PrecautionsPower For models having a power cord with a polarized plugIf in any doubt, consult a qualified electrician Supplied AccessoriesPrecautions Make sure you have the following accessoriesFM/AM Tuner FeaturesAmplifier Audio/VideoTable of Contents Table of Contents Front Panel Front & Rear PanelsDisplay Front & Rear PanelsIR IN/OUT Rear PanelComponent Video in 1, 2, 3 27, 29 RS232Video 2 IN/OUT 28 Optical Digital 26, 27, 29, 31, 32Coaxial Digital 26, 27, 29, 31, 32 Video 3 in 26RC-587M Remote ControllerReceiver Mode Remote indicatorRemote Controller DVD Mode CD Mode MD/CDR Mode Rewind & FF Buttons Tape ModeStop button Reverse Play buttonUsing the Remote Controller Installing the BatteriesEnjoying Home Theater About Home TheaterAV Connection Color Coding Connecting the AV receiverAbout AV Connections Optical Digital JacksConnecting Your Speakers Connecting the AV receiverStrip about 5/8 15 mm Speaker Connection PrecautionsConnecting the Speaker Cables Attach the FM antenna, as shown Connecting AntennaConnecting the Indoor FM Antenna Connecting the AM Loop AntennaUsing a TV/FM Antenna Splitter Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Audio Connection Formats Connecting Both Audio & VideoWhich Connections Should I Use? Video Connection FormatsAudio Connections Connecting Your TV or ProjectorMonitor Out Your TV must also be connected via component video Connecting a DVD PlayerUsing Analog Connections Video ConnectionsUsing a Multichannel Connection Connecting a VCR for PlaybackComponent Video Connecting a D-VHS VCR for PlaybackTV or VCR, etc Connecting a VCR for RecordingPlayback from the Recording VCR VCR recordingSatellite, cable, set-top box, LD player, etc Using Optical or Coaxial ConnectionsCD player Connecting a Cassette Recorder Connecting a CD PlayerDigital Recording Connecting a DAT, CD, or MD RecorderUsing Optical or Coaxial Connections Playback only Analog ConnectionsTurntable without a Built-in Phono Preamp Connecting a TurntableConnecting Components Turntable with a Built-in Phono PreampStandby/On Connecting the Power Cords of Other ComponentsTurning On the AV receiver Submenus First Time SetupAbout the Onscreen Setup Menus Main menusDigital Input First Time SetupInitial Setup Tor, and then use the Left Component Video SetupMain menu appears onscreen Buttons to select an input selecButtons to select Speaker SetupSpeaker Setup menu appears Then use the Left and RightButtons to select d. Surround DefaultCrossover Double BassButtons to specify the dis- tance Speaker DistanceTance, and then press Enter Speaker Distance menu appearsSpeaker Level Calibration Repeat this step to select TAPE, MD, or CDR Changing the TAPE/MD/CDR DisplayStart playback on the source component Basic OperationSelecting the Input Source Basic Operation Setting the Display BrightnessUsing the Sleep Timer Using HeadphonesInterpreting Surround Channel Values Displaying Source InformationYou can display various information about the current Input source as followsUse the Tuner input selector Using the TunerTuning into Radio Stations Listening to the RadioDisplaying Radio Information Presetting Radio StationsSelecting Preset Stations Deleting PresetsDetailed information about the listening modes Selecting with the Remote ControllerSelecting on the AV receiver See About the Listening Modes on page 51 forDVD, LD, CD, etc Analog Dolby D DTS/DTS 96/24*2 Input signal formatOnkyo Original DSP Modes About the Listening ModesAdvanced Operation Using the CinemaFILTERUsing the Late Night Function Dolby Digital only Adjusting the Bass & TrebleAdvanced Operation Adjusting Individual Speaker LevelsRecording Audio RecordingRecording Separate AV Sources AV RecordingDolby Digital Advanced SetupDecoder Setup Analog/PCMAudio Adjust Functions Advanced SetupPlii Music Theater-DimensionalMono Virtual Surr Level Use the Up and Down Buttons to select the signal forListening Mode Preset menu appears Assigning Listening Modes to Input SourcesVolume Setup Setting PreferencesIntelliVolume Digital Format OSD SetupRemote Setup 6-7., 6-8 V Trigger SetupControl ID Changing the Remote Controller’s IDPress and hold down the Receiver but Ton, and then press the TV Input buttonZone Connecting ZoneUsing a Receiver/Integrated Amp in Zone Using Only Speakers in ZoneZone 2, and use the Left Buttons to select a. PoweredHardware Setup menu appears Buttons to select 3. Hardware Setting the Zone 2 OutOuts Hardware Setup menu appears Zone 2 OUT L/R jacks can also be used as preUsing Zone Using a Multiroom Kit with Zone Using the Remote Control in ZoneUsing the 12V Trigger Adjusting the Bass & Treble for Zone2Controlling Out-of-range Components Using a Multiroom Kit with a CabinetCodes for Integra DVD Players Entering Remote Control CodesSetting the MD/CDR Button to CDR Controlling Other ComponentsControlling Other Components Resetting Remote Mode ButtonsResetting the Remote Controller SAT satellite receiver Remote Control CodesDVD DVD player ABC CBL cable receiverSBR NAD Controlling a Cable Receiver Controlling a TVButtons Controlling a VCR Controlling a Satellite ReceiverRec NumberLearning Commands from Another Remote Controller Running Macros Using MacrosMaking Macros Troubleshooting Troubleshooting Zone 2 has turned off? Remote controller doesn’t work?Can’t control other components? Can’t record?Display doesn’t work? Sound changes when I connect my head- phones?Speaker volume cannot be set as required? Speaker distance cannot be set as required?Tuner Section SpecificationsAmplifier Section Video Section3 4 3 8 2

DTR-4.5 specifications

The Integra DTR-4.5 is a versatile and feature-rich AV Receiver designed to deliver an immersive home theater experience. At its core, this model exemplifies Integra's commitment to high-fidelity audio and video performance, making it an ideal choice for audiophiles and home cinema enthusiasts alike.

One of the standout features of the DTR-4.5 is its robust audio processing capabilities. The receiver supports Dolby Atmos and DTS:X, providing a three-dimensional soundstage that allows users to experience movies and music in a new light. The Advanced Digital Audio Processing ensures that every sound is rendered with clarity and precision, replicating the dynamics of a live performance.

In terms of connectivity, the DTR-4.5 is equipped with multiple HDMI inputs and outputs, supporting 4K Ultra HD video pass-through and scaling. This enables seamless integration with modern video sources and displays, allowing users to enjoy high-resolution content without compromising quality. The receiver also features HDCP 2.2 compatibility, ensuring it can support the latest streaming services and content protection standards.

For those who value convenience, the DTR-4.5 includes built-in Wi-Fi and Bluetooth functionality, allowing wireless streaming from various devices. Integra also provides an intuitive mobile app that enables users to control their AV system from their smartphones or tablets, further enhancing the user experience.

An essential characteristic of the DTR-4.5 is its room calibration technology. The Auto Room Acoustic Calibration system analyzes the acoustic property of the listening environment and adjusts settings accordingly. This ensures optimal sound distribution and compensates for room anomalies, providing a balanced audio experience regardless of the room configuration.

The construction of the DTR-4.5 reflects Integra's dedication to quality, featuring a solid chassis and premium components that minimize distortion and maximize performance. This attention to detail is evident not only in sound quality but also in the visual aesthetics of the unit, which complements modern home theaters beautifully.

Overall, the Integra DTR-4.5 is a powerhouse of an AV receiver, combining cutting-edge audio technology with user-friendly features. Its commitment to high-quality performance, modern connectivity options, and adaptability make it a standout choice for anyone looking to elevate their home entertainment experience. Whether for movies, music, or gaming, the DTR-4.5 delivers a captivating experience that is sure to impress.
Top Page Image Contents