Integra DTR-4.5 instruction manual Features, Amplifier, Audio/Video, FM/AM Tuner, Others

Page 5

Features

Amplifier

•85 watts per channel into 8 ohms, 2 channels driven from 20 Hz to 20 kHz, less than 0.08% total harmonic distortion (FTC rating)

•5-channel amplifier

•Optimum Gain Volume Circuitry

•Zone 2 capability

•24-bit/192 kHz D/A converters

•WRAT (Wide Range Amplifier Technology)

•Color-coded speaker terminal posts

Audio/Video

•Dolby*1 Digital, Dolby Pro Logic II

•DTS*2 and DTS 96/24

•Theater-Dimensional*3virtual surround mode

•Zone 2 out

•Composite video to S-Video and S-Video to compos- ite video conversion

•CinemaFILTER*4

•Subwoofer pre out

•4 digital inputs (2 optical, 2 coaxial), 1 digital optical output.

•3 component video inputs, 1 output

•4 S-Video inputs, 3 outputs

FM/AM Tuner

•40 AM/FM presets

•AM/FM auto tuning

Others

•Easy-to-use onscreen setup menus

•Preprogrammed remote controller for use with other AV components

*1. Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

*2. “DTS” and “DTS 96/24 are trademarks of Digital Theater Sys- tems, Inc.

*3. “Theater-Dimensional” is a trademark of Onkyo Corporation.

*4. “CinemaFILTER” is a trademark of Onkyo Corporation. A-BUS and A-BUS Ready are registered trademarks of LeisureTech Electronics Pty Ltd Australia.

“Xantech” is a registered trademark of Xantech Corporation. “Niles” is a registered trademark of Niles Audio Corporation.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents DTR-4.5 Avis Important Safety InstructionsPower PrecautionsFor models having a power cord with a polarized plug FCC Information for UserPrecautions Supplied AccessoriesMake sure you have the following accessories If in any doubt, consult a qualified electricianAmplifier FeaturesAudio/Video FM/AM TunerTable of Contents Table of Contents Front Panel Front & Rear PanelsDisplay Front & Rear PanelsComponent Video in 1, 2, 3 27, 29 Rear PanelRS232 IR IN/OUTCoaxial Digital 26, 27, 29, 31, 32 Optical Digital 26, 27, 29, 31, 32Video 3 in 26 Video 2 IN/OUT 28Receiver Mode Remote ControllerRemote indicator RC-587MRemote Controller DVD Mode CD Mode MD/CDR Mode Stop button Tape ModeReverse Play button Rewind & FF ButtonsUsing the Remote Controller Installing the BatteriesEnjoying Home Theater About Home TheaterAbout AV Connections Connecting the AV receiverOptical Digital Jacks AV Connection Color CodingConnecting Your Speakers Connecting the AV receiverStrip about 5/8 15 mm Speaker Connection PrecautionsConnecting the Speaker Cables Connecting the Indoor FM Antenna Connecting AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shownUsing a TV/FM Antenna Splitter Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Which Connections Should I Use? Connecting Both Audio & VideoVideo Connection Formats Audio Connection FormatsAudio Connections Connecting Your TV or ProjectorMonitor Out Using Analog Connections Connecting a DVD PlayerVideo Connections Your TV must also be connected via component videoUsing a Multichannel Connection Connecting a VCR for PlaybackComponent Video Connecting a D-VHS VCR for PlaybackPlayback from the Recording VCR Connecting a VCR for RecordingVCR recording TV or VCR, etcSatellite, cable, set-top box, LD player, etc Using Optical or Coaxial ConnectionsCD player Connecting a Cassette Recorder Connecting a CD PlayerUsing Optical or Coaxial Connections Playback only Connecting a DAT, CD, or MD RecorderAnalog Connections Digital RecordingConnecting Components Connecting a TurntableTurntable with a Built-in Phono Preamp Turntable without a Built-in Phono PreampStandby/On Connecting the Power Cords of Other ComponentsTurning On the AV receiver About the Onscreen Setup Menus First Time SetupMain menus SubmenusDigital Input First Time SetupInitial Setup Main menu appears onscreen Component Video SetupButtons to select an input selec Tor, and then use the LeftSpeaker Setup menu appears Speaker SetupThen use the Left and Right Buttons to selectCrossover DefaultDouble Bass Buttons to select d. SurroundTance, and then press Enter Speaker DistanceSpeaker Distance menu appears Buttons to specify the dis- tanceSpeaker Level Calibration Repeat this step to select TAPE, MD, or CDR Changing the TAPE/MD/CDR DisplayStart playback on the source component Basic OperationSelecting the Input Source Using the Sleep Timer Setting the Display BrightnessUsing Headphones Basic OperationYou can display various information about the current Displaying Source InformationInput source as follows Interpreting Surround Channel ValuesTuning into Radio Stations Using the TunerListening to the Radio Use the Tuner input selectorSelecting Preset Stations Presetting Radio StationsDeleting Presets Displaying Radio InformationSelecting on the AV receiver Selecting with the Remote ControllerSee About the Listening Modes on page 51 for Detailed information about the listening modesDVD, LD, CD, etc Analog Dolby D DTS/DTS 96/24*2 Input signal formatOnkyo Original DSP Modes About the Listening ModesUsing the Late Night Function Dolby Digital only Using the CinemaFILTERAdjusting the Bass & Treble Advanced OperationAdvanced Operation Adjusting Individual Speaker LevelsRecording Audio RecordingRecording Separate AV Sources AV RecordingDecoder Setup Advanced SetupAnalog/PCM Dolby DigitalAudio Adjust Functions Advanced SetupPlii Music Theater-DimensionalMono Listening Mode Preset menu appears Use the Up and Down Buttons to select the signal forAssigning Listening Modes to Input Sources Virtual Surr LevelVolume Setup Setting PreferencesIntelliVolume Remote Setup OSD Setup6-7., 6-8 V Trigger Setup Digital FormatPress and hold down the Receiver but Changing the Remote Controller’s IDTon, and then press the TV Input button Control IDUsing a Receiver/Integrated Amp in Zone Connecting ZoneUsing Only Speakers in Zone ZoneZone 2, and use the Left Buttons to select a. PoweredHardware Setup menu appears Outs Hardware Setup menu appears Setting the Zone 2 OutZone 2 OUT L/R jacks can also be used as pre Buttons to select 3. HardwareUsing Zone Using the 12V Trigger Using the Remote Control in ZoneAdjusting the Bass & Treble for Zone2 Using a Multiroom Kit with ZoneControlling Out-of-range Components Using a Multiroom Kit with a CabinetSetting the MD/CDR Button to CDR Entering Remote Control CodesControlling Other Components Codes for Integra DVD PlayersControlling Other Components Resetting Remote Mode ButtonsResetting the Remote Controller SAT satellite receiver Remote Control CodesDVD DVD player ABC CBL cable receiverSBR NAD Controlling a Cable Receiver Controlling a TVRec Controlling a VCR Controlling a Satellite ReceiverNumber ButtonsLearning Commands from Another Remote Controller Running Macros Using MacrosMaking Macros Troubleshooting Troubleshooting Can’t control other components? Remote controller doesn’t work?Can’t record? Zone 2 has turned off?Speaker volume cannot be set as required? Sound changes when I connect my head- phones?Speaker distance cannot be set as required? Display doesn’t work?Amplifier Section SpecificationsVideo Section Tuner Section3 4 3 8 2

DTR-4.5 specifications

The Integra DTR-4.5 is a versatile and feature-rich AV Receiver designed to deliver an immersive home theater experience. At its core, this model exemplifies Integra's commitment to high-fidelity audio and video performance, making it an ideal choice for audiophiles and home cinema enthusiasts alike.

One of the standout features of the DTR-4.5 is its robust audio processing capabilities. The receiver supports Dolby Atmos and DTS:X, providing a three-dimensional soundstage that allows users to experience movies and music in a new light. The Advanced Digital Audio Processing ensures that every sound is rendered with clarity and precision, replicating the dynamics of a live performance.

In terms of connectivity, the DTR-4.5 is equipped with multiple HDMI inputs and outputs, supporting 4K Ultra HD video pass-through and scaling. This enables seamless integration with modern video sources and displays, allowing users to enjoy high-resolution content without compromising quality. The receiver also features HDCP 2.2 compatibility, ensuring it can support the latest streaming services and content protection standards.

For those who value convenience, the DTR-4.5 includes built-in Wi-Fi and Bluetooth functionality, allowing wireless streaming from various devices. Integra also provides an intuitive mobile app that enables users to control their AV system from their smartphones or tablets, further enhancing the user experience.

An essential characteristic of the DTR-4.5 is its room calibration technology. The Auto Room Acoustic Calibration system analyzes the acoustic property of the listening environment and adjusts settings accordingly. This ensures optimal sound distribution and compensates for room anomalies, providing a balanced audio experience regardless of the room configuration.

The construction of the DTR-4.5 reflects Integra's dedication to quality, featuring a solid chassis and premium components that minimize distortion and maximize performance. This attention to detail is evident not only in sound quality but also in the visual aesthetics of the unit, which complements modern home theaters beautifully.

Overall, the Integra DTR-4.5 is a powerhouse of an AV receiver, combining cutting-edge audio technology with user-friendly features. Its commitment to high-quality performance, modern connectivity options, and adaptability make it a standout choice for anyone looking to elevate their home entertainment experience. Whether for movies, music, or gaming, the DTR-4.5 delivers a captivating experience that is sure to impress.
Top Page Image Contents