Integra DTR-4.5 instruction manual Front & Rear Panels, Front Panel

Page 8

Front & Rear Panels

Front Panel

1 23456789J K L MN O P Q R S T

Zone 2

 

 

Standby

U

V

W

For detailed information, see the pages in parentheses.

AStandby/On button (35)

This button is used to set the AV receiver to On or Standby.

BStandby indicator (35)

This indicator lights up when the AV receiver is in Standby mode, and it flashes while a signal is being received from the remote controller.

CZone 2 indicator (66)

This indicator lights up when Zone 2 is selected.

DRemote-control sensor (18)

This sensor receives control signals from the remote controller.

ERec Out button (54)

JStereo button (49)

This button is used to select the Stereo listening mode.

KListening Mode [] [] buttons (49)

These buttons are used to select the listening modes.

LDisplay button (46)

This button is used to display various information about the currently selected input source.

MDisplay

See “Display” on page 9.

NMemory button (48)

This button is used when storing or deleting radio presets.

OTuning Mode button (47)

This button is used to select the input source to be recorded.

FZone 2 button (66)

This button is used to select the input source for Zone 2.

GLevel button (66)

This button is used to set the volume for Zone 2.

HTone button (67)

This button is used to adjust the bass and treble for Zone 2.

IController [] [] buttons (54, 66, 67)

These buttons are used to select the input source to be recorded via the REC OUTs, to select the input source for Zone 2, and to set the volume, bass, and treble for Zone 2.

This button is used to select the Auto or Manual tun- ing mode.

PDimmer button (45)

This button is used to adjust the display brightness.

QSetup button (37)

This button is used to access the onscreen setup menus that appear on the connected TV.

RArrow/Tuning/Preset & Enter buttons (37)

When the AM or FM input source is selected, the

Tuning [] [] buttons are used to tune the tuner, and the Preset [] [] buttons are used to select radio presets (see page 48). When the onscreen setup menus are used, they work as arrow buttons and are used to select and set items. The Enter but- ton is also used with the onscreen setup menus.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents DTR-4.5 Important Safety Instructions AvisPrecautions PowerFor models having a power cord with a polarized plug FCC Information for UserSupplied Accessories PrecautionsMake sure you have the following accessories If in any doubt, consult a qualified electricianFeatures AmplifierAudio/Video FM/AM TunerTable of Contents Table of Contents Front & Rear Panels Front PanelFront & Rear Panels DisplayRear Panel Component Video in 1, 2, 3 27, 29RS232 IR IN/OUTOptical Digital 26, 27, 29, 31, 32 Coaxial Digital 26, 27, 29, 31, 32Video 3 in 26 Video 2 IN/OUT 28Remote Controller Receiver ModeRemote indicator RC-587MRemote Controller DVD Mode CD Mode MD/CDR Mode Tape Mode Stop buttonReverse Play button Rewind & FF ButtonsInstalling the Batteries Using the Remote ControllerAbout Home Theater Enjoying Home TheaterConnecting the AV receiver About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting the AV receiver Connecting Your SpeakersStrip about 5/8 15 mm Speaker Connection PrecautionsConnecting the Speaker Cables Connecting Antenna Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shownUsing a TV/FM Antenna Splitter Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Connecting Both Audio & Video Which Connections Should I Use?Video Connection Formats Audio Connection FormatsAudio Connections Connecting Your TV or ProjectorMonitor Out Connecting a DVD Player Using Analog ConnectionsVideo Connections Your TV must also be connected via component videoConnecting a VCR for Playback Using a Multichannel ConnectionConnecting a D-VHS VCR for Playback Component VideoConnecting a VCR for Recording Playback from the Recording VCRVCR recording TV or VCR, etcUsing Optical or Coaxial Connections Satellite, cable, set-top box, LD player, etcConnecting a Cassette Recorder Connecting a CD Player CD playerConnecting a DAT, CD, or MD Recorder Using Optical or Coaxial Connections Playback onlyAnalog Connections Digital RecordingConnecting a Turntable Connecting ComponentsTurntable with a Built-in Phono Preamp Turntable without a Built-in Phono PreampStandby/On Connecting the Power Cords of Other ComponentsTurning On the AV receiver First Time Setup About the Onscreen Setup MenusMain menus SubmenusDigital Input First Time SetupInitial Setup Component Video Setup Main menu appears onscreenButtons to select an input selec Tor, and then use the LeftSpeaker Setup Speaker Setup menu appearsThen use the Left and Right Buttons to selectDefault CrossoverDouble Bass Buttons to select d. SurroundSpeaker Distance Tance, and then press EnterSpeaker Distance menu appears Buttons to specify the dis- tanceSpeaker Level Calibration Changing the TAPE/MD/CDR Display Repeat this step to select TAPE, MD, or CDRStart playback on the source component Basic OperationSelecting the Input Source Setting the Display Brightness Using the Sleep TimerUsing Headphones Basic OperationDisplaying Source Information You can display various information about the currentInput source as follows Interpreting Surround Channel ValuesUsing the Tuner Tuning into Radio StationsListening to the Radio Use the Tuner input selectorPresetting Radio Stations Selecting Preset StationsDeleting Presets Displaying Radio InformationSelecting with the Remote Controller Selecting on the AV receiverSee About the Listening Modes on page 51 for Detailed information about the listening modesAnalog Dolby D DTS/DTS 96/24*2 Input signal format DVD, LD, CD, etcAbout the Listening Modes Onkyo Original DSP ModesUsing the CinemaFILTER Using the Late Night Function Dolby Digital onlyAdjusting the Bass & Treble Advanced OperationAdjusting Individual Speaker Levels Advanced OperationRecording Recording AudioAV Recording Recording Separate AV SourcesAdvanced Setup Decoder SetupAnalog/PCM Dolby DigitalAdvanced Setup Audio Adjust FunctionsPlii Music Theater-DimensionalMono Use the Up and Down Buttons to select the signal for Listening Mode Preset menu appearsAssigning Listening Modes to Input Sources Virtual Surr LevelVolume Setup Setting PreferencesIntelliVolume OSD Setup Remote Setup6-7., 6-8 V Trigger Setup Digital FormatChanging the Remote Controller’s ID Press and hold down the Receiver butTon, and then press the TV Input button Control IDConnecting Zone Using a Receiver/Integrated Amp in ZoneUsing Only Speakers in Zone ZoneZone 2, and use the Left Buttons to select a. PoweredHardware Setup menu appears Setting the Zone 2 Out Outs Hardware Setup menu appearsZone 2 OUT L/R jacks can also be used as pre Buttons to select 3. HardwareUsing Zone Using the Remote Control in Zone Using the 12V TriggerAdjusting the Bass & Treble for Zone2 Using a Multiroom Kit with ZoneUsing a Multiroom Kit with a Cabinet Controlling Out-of-range ComponentsEntering Remote Control Codes Setting the MD/CDR Button to CDRControlling Other Components Codes for Integra DVD PlayersControlling Other Components Resetting Remote Mode ButtonsResetting the Remote Controller SAT satellite receiver Remote Control CodesDVD DVD player CBL cable receiver ABCSBR NAD Controlling a TV Controlling a Cable ReceiverControlling a VCR Controlling a Satellite Receiver RecNumber ButtonsLearning Commands from Another Remote Controller Running Macros Using MacrosMaking Macros Troubleshooting Troubleshooting Remote controller doesn’t work? Can’t control other components?Can’t record? Zone 2 has turned off?Sound changes when I connect my head- phones? Speaker volume cannot be set as required?Speaker distance cannot be set as required? Display doesn’t work?Specifications Amplifier SectionVideo Section Tuner Section3 4 3 8 2

DTR-4.5 specifications

The Integra DTR-4.5 is a versatile and feature-rich AV Receiver designed to deliver an immersive home theater experience. At its core, this model exemplifies Integra's commitment to high-fidelity audio and video performance, making it an ideal choice for audiophiles and home cinema enthusiasts alike.

One of the standout features of the DTR-4.5 is its robust audio processing capabilities. The receiver supports Dolby Atmos and DTS:X, providing a three-dimensional soundstage that allows users to experience movies and music in a new light. The Advanced Digital Audio Processing ensures that every sound is rendered with clarity and precision, replicating the dynamics of a live performance.

In terms of connectivity, the DTR-4.5 is equipped with multiple HDMI inputs and outputs, supporting 4K Ultra HD video pass-through and scaling. This enables seamless integration with modern video sources and displays, allowing users to enjoy high-resolution content without compromising quality. The receiver also features HDCP 2.2 compatibility, ensuring it can support the latest streaming services and content protection standards.

For those who value convenience, the DTR-4.5 includes built-in Wi-Fi and Bluetooth functionality, allowing wireless streaming from various devices. Integra also provides an intuitive mobile app that enables users to control their AV system from their smartphones or tablets, further enhancing the user experience.

An essential characteristic of the DTR-4.5 is its room calibration technology. The Auto Room Acoustic Calibration system analyzes the acoustic property of the listening environment and adjusts settings accordingly. This ensures optimal sound distribution and compensates for room anomalies, providing a balanced audio experience regardless of the room configuration.

The construction of the DTR-4.5 reflects Integra's dedication to quality, featuring a solid chassis and premium components that minimize distortion and maximize performance. This attention to detail is evident not only in sound quality but also in the visual aesthetics of the unit, which complements modern home theaters beautifully.

Overall, the Integra DTR-4.5 is a powerhouse of an AV receiver, combining cutting-edge audio technology with user-friendly features. Its commitment to high-quality performance, modern connectivity options, and adaptability make it a standout choice for anyone looking to elevate their home entertainment experience. Whether for movies, music, or gaming, the DTR-4.5 delivers a captivating experience that is sure to impress.
Top Page Image Contents