Integra DTR-4.5 instruction manual Connecting Zone, Using a Receiver/Integrated Amp in Zone

Page 63

Zone 2

Connecting Zone 2

With the Zone 2 function, you can enjoy one input source in the main room and a different source in another room.

There are two connection methods: using a receiver/inte- grated amp in Zone 2 or using only a pair of speakers in Zone 2.

Using a Receiver/Integrated Amp in Zone 2

With this connection method, you can use 5.1 surround sound in the main room and play a different AV source in Zone 2. The volume for Zone 2 is set on the receiver/ integrated amp.

•Use an RCA audio cable to connect the AV receiver’s ZONE 2 OUT L/R jacks to an analog audio input on your receiver/integrated amp.

•Connect the Zone 2 speakers to the speaker terminals on the receiver/integrated amp.

Main room

TV

AV receiver

Zone 2

 

 

 

IN

TV

R

L

 

 

 

Receiver/

 

 

integrated amp

The AV receiver’s ZONE 2 OUT jacks can also be used as pre outs, although, in this case, the volume cannot be controlled solely on the connected amplifier. See “Set- ting the Zone 2 Out” on page 65 for details.

Using Only Speakers in Zone 2

With this connection method, you can use stereo sound in the main room and play a different AV source in Zone 2. The volume for Zone 2 is set on the AV receiver.

•Set the Powered Zone 2 setting to Activated (see page 64).

•Connect your Zone 2 speakers to the AV receiver’s ZONE 2 SPEAKERS terminals.

Main room

TV

AV receiver

Zone 2

LR

63

Page 62 Page 64
Image 63
Page 62 Page 64
Contents DTR-4.5 Avis Important Safety InstructionsFCC Information for User PrecautionsPower For models having a power cord with a polarized plugIf in any doubt, consult a qualified electrician Supplied AccessoriesPrecautions Make sure you have the following accessoriesFM/AM Tuner FeaturesAmplifier Audio/VideoTable of Contents Table of Contents Front Panel Front & Rear PanelsDisplay Front & Rear PanelsIR IN/OUT Rear PanelComponent Video in 1, 2, 3 27, 29 RS232Video 2 IN/OUT 28 Optical Digital 26, 27, 29, 31, 32Coaxial Digital 26, 27, 29, 31, 32 Video 3 in 26RC-587M Remote ControllerReceiver Mode Remote indicatorRemote Controller DVD Mode CD Mode MD/CDR Mode Rewind & FF Buttons Tape ModeStop button Reverse Play buttonUsing the Remote Controller Installing the BatteriesEnjoying Home Theater About Home TheaterAV Connection Color Coding Connecting the AV receiverAbout AV Connections Optical Digital JacksConnecting Your Speakers Connecting the AV receiverSpeaker Connection Precautions Connecting the Speaker CablesStrip about 5/8 15 mm Attach the FM antenna, as shown Connecting AntennaConnecting the Indoor FM Antenna Connecting the AM Loop AntennaConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaUsing a TV/FM Antenna Splitter Audio Connection Formats Connecting Both Audio & VideoWhich Connections Should I Use? Video Connection FormatsConnecting Your TV or Projector Monitor OutAudio Connections Your TV must also be connected via component video Connecting a DVD PlayerUsing Analog Connections Video ConnectionsUsing a Multichannel Connection Connecting a VCR for PlaybackComponent Video Connecting a D-VHS VCR for PlaybackTV or VCR, etc Connecting a VCR for RecordingPlayback from the Recording VCR VCR recordingSatellite, cable, set-top box, LD player, etc Using Optical or Coaxial ConnectionsCD player Connecting a Cassette Recorder Connecting a CD PlayerDigital Recording Connecting a DAT, CD, or MD RecorderUsing Optical or Coaxial Connections Playback only Analog ConnectionsTurntable without a Built-in Phono Preamp Connecting a TurntableConnecting Components Turntable with a Built-in Phono PreampConnecting the Power Cords of Other Components Turning On the AV receiverStandby/On Submenus First Time SetupAbout the Onscreen Setup Menus Main menusFirst Time Setup Initial SetupDigital Input Tor, and then use the Left Component Video SetupMain menu appears onscreen Buttons to select an input selecButtons to select Speaker SetupSpeaker Setup menu appears Then use the Left and RightButtons to select d. Surround DefaultCrossover Double BassButtons to specify the dis- tance Speaker DistanceTance, and then press Enter Speaker Distance menu appearsSpeaker Level Calibration Repeat this step to select TAPE, MD, or CDR Changing the TAPE/MD/CDR DisplayBasic Operation Selecting the Input SourceStart playback on the source component Basic Operation Setting the Display BrightnessUsing the Sleep Timer Using HeadphonesInterpreting Surround Channel Values Displaying Source InformationYou can display various information about the current Input source as followsUse the Tuner input selector Using the TunerTuning into Radio Stations Listening to the RadioDisplaying Radio Information Presetting Radio StationsSelecting Preset Stations Deleting PresetsDetailed information about the listening modes Selecting with the Remote ControllerSelecting on the AV receiver See About the Listening Modes on page 51 forDVD, LD, CD, etc Analog Dolby D DTS/DTS 96/24*2 Input signal formatOnkyo Original DSP Modes About the Listening ModesAdvanced Operation Using the CinemaFILTERUsing the Late Night Function Dolby Digital only Adjusting the Bass & TrebleAdvanced Operation Adjusting Individual Speaker LevelsRecording Audio RecordingRecording Separate AV Sources AV RecordingDolby Digital Advanced SetupDecoder Setup Analog/PCMAudio Adjust Functions Advanced SetupTheater-Dimensional MonoPlii Music Virtual Surr Level Use the Up and Down Buttons to select the signal forListening Mode Preset menu appears Assigning Listening Modes to Input SourcesSetting Preferences IntelliVolumeVolume Setup Digital Format OSD SetupRemote Setup 6-7., 6-8 V Trigger SetupControl ID Changing the Remote Controller’s IDPress and hold down the Receiver but Ton, and then press the TV Input buttonZone Connecting ZoneUsing a Receiver/Integrated Amp in Zone Using Only Speakers in ZoneButtons to select a. Powered Hardware Setup menu appearsZone 2, and use the Left Buttons to select 3. Hardware Setting the Zone 2 OutOuts Hardware Setup menu appears Zone 2 OUT L/R jacks can also be used as preUsing Zone Using a Multiroom Kit with Zone Using the Remote Control in ZoneUsing the 12V Trigger Adjusting the Bass & Treble for Zone2Controlling Out-of-range Components Using a Multiroom Kit with a CabinetCodes for Integra DVD Players Entering Remote Control CodesSetting the MD/CDR Button to CDR Controlling Other ComponentsResetting Remote Mode Buttons Resetting the Remote ControllerControlling Other Components Remote Control Codes DVD DVD playerSAT satellite receiver ABC CBL cable receiverSBR NAD Controlling a Cable Receiver Controlling a TVButtons Controlling a VCR Controlling a Satellite ReceiverRec NumberLearning Commands from Another Remote Controller Using Macros Making MacrosRunning Macros Troubleshooting Troubleshooting Zone 2 has turned off? Remote controller doesn’t work?Can’t control other components? Can’t record?Display doesn’t work? Sound changes when I connect my head- phones?Speaker volume cannot be set as required? Speaker distance cannot be set as required?Tuner Section SpecificationsAmplifier Section Video Section3 4 3 8 2

DTR-4.5 specifications

The Integra DTR-4.5 is a versatile and feature-rich AV Receiver designed to deliver an immersive home theater experience. At its core, this model exemplifies Integra's commitment to high-fidelity audio and video performance, making it an ideal choice for audiophiles and home cinema enthusiasts alike.

One of the standout features of the DTR-4.5 is its robust audio processing capabilities. The receiver supports Dolby Atmos and DTS:X, providing a three-dimensional soundstage that allows users to experience movies and music in a new light. The Advanced Digital Audio Processing ensures that every sound is rendered with clarity and precision, replicating the dynamics of a live performance.

In terms of connectivity, the DTR-4.5 is equipped with multiple HDMI inputs and outputs, supporting 4K Ultra HD video pass-through and scaling. This enables seamless integration with modern video sources and displays, allowing users to enjoy high-resolution content without compromising quality. The receiver also features HDCP 2.2 compatibility, ensuring it can support the latest streaming services and content protection standards.

For those who value convenience, the DTR-4.5 includes built-in Wi-Fi and Bluetooth functionality, allowing wireless streaming from various devices. Integra also provides an intuitive mobile app that enables users to control their AV system from their smartphones or tablets, further enhancing the user experience.

An essential characteristic of the DTR-4.5 is its room calibration technology. The Auto Room Acoustic Calibration system analyzes the acoustic property of the listening environment and adjusts settings accordingly. This ensures optimal sound distribution and compensates for room anomalies, providing a balanced audio experience regardless of the room configuration.

The construction of the DTR-4.5 reflects Integra's dedication to quality, featuring a solid chassis and premium components that minimize distortion and maximize performance. This attention to detail is evident not only in sound quality but also in the visual aesthetics of the unit, which complements modern home theaters beautifully.

Overall, the Integra DTR-4.5 is a powerhouse of an AV receiver, combining cutting-edge audio technology with user-friendly features. Its commitment to high-quality performance, modern connectivity options, and adaptability make it a standout choice for anyone looking to elevate their home entertainment experience. Whether for movies, music, or gaming, the DTR-4.5 delivers a captivating experience that is sure to impress.
Top Page Image Contents