Integra DTR-4.5 instruction manual AV Recording, Recording Separate AV Sources

Page 55

Advanced Operation—Continued

AV Recording

You can record AV input sources to an AV recording component (VCR, etc) connected to the VIDEO 1 OUT or VIDEO 2 OUT. See pages 26–35 for information on connecting components.

1

Zone 2

Standby

Recording Separate AV Sources

Here you can record audio and video from completely separate sources, allowing you to overdub audio onto your video recordings. This function takes advantage of the fact that when an audio-only input source (i.e., TAPE, TUNER, or CD) is selected, the video input source remains unchanged.

In the following example, audio from the CD player con- nected to the CD IN, and video from the camcorder con- nected to the VIDEO 3 INPUT VIDEO jack are recorded by the VCR connected to the VIDEO 1 OUT jacks.

Camcorder

1

2

3

Use the input selector buttons to select the AV component that you want to record.

Audio signals from the selected input source are output by the VIDEO 1 OUT and VIDEO 2 OUT only.

You can watch the source while record- ing, and the AV receiver’s VOLUME control has no effect on recording.

Start recording on the AV compo- nent connected to the VIDEO 1 OUT or VIDEO 2 OUT.

Start playback on the source AV component.

If you select another input source dur- ing recording, that input source will be recorded.

 

 

 

 

 

video signal

 

 

 

 

 

audio signal

 

 

 

 

IN2

IN1

OUT

DIGITAL

 

 

 

 

 

 

 

 

COAXIAL

 

 

COMPONENT VIDEO

RS232

OPTICAL

 

 

IN 2

IN 1

 

 

 

 

 

 

 

IN 3

IN 2

IN 1

OUT

 

 

 

 

 

Y

 

 

 

 

 

 

 

 

VIDEO 3

VIDEO 2

 

VIDEO 1

 

DVD

MONITOR

PRE OUT

IN

OUT

IN

OUT

IN

IN

OUT

 

 

 

 

 

 

 

V

 

PB

 

 

 

 

 

 

SUB

 

 

 

 

 

 

WOOFER

 

 

 

 

 

 

S

 

PR

 

 

 

 

 

 

 

IN

OUT

IN

IN

OUT

IN

OUT

IN

FRONT

SURR

CENTER

L

ZONE 2

 

 

 

 

 

 

 

 

 

 

 

 

OUT

L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REMOTE

R

 

 

 

 

 

 

CONTROL

 

 

 

 

 

 

 

 

 

 

 

 

 

SUB

R

CD

TAPE

VIDEO 3

VIDEO 2

VIDEO 1

DVD

WOOFER

 

 

 

CD player

VCR

1

Prepare the camcorder and CD player for

 

playback.

 

 

2

Prepare the VCR for recording.

 

 

3

Press the [VIDEO 3] input selector button.

 

 

4

Press the [CD] input selector button.

This selects the CD player as the audio source, but leaves the camcorder as the video source.

5 Start recording on the VCR and start play- back on the camcorder and CD player.

The video from the camcorder and the audio from the CD player are recorded by the VCR.

55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents DTR-4.5 Avis Important Safety InstructionsFCC Information for User PrecautionsPower For models having a power cord with a polarized plugIf in any doubt, consult a qualified electrician Supplied AccessoriesPrecautions Make sure you have the following accessoriesFM/AM Tuner FeaturesAmplifier Audio/VideoTable of Contents Table of Contents Front Panel Front & Rear PanelsDisplay Front & Rear PanelsIR IN/OUT Rear PanelComponent Video in 1, 2, 3 27, 29 RS232Video 2 IN/OUT 28 Optical Digital 26, 27, 29, 31, 32Coaxial Digital 26, 27, 29, 31, 32 Video 3 in 26RC-587M Remote ControllerReceiver Mode Remote indicatorRemote Controller DVD Mode CD Mode MD/CDR Mode Rewind & FF Buttons Tape ModeStop button Reverse Play buttonUsing the Remote Controller Installing the BatteriesEnjoying Home Theater About Home TheaterAV Connection Color Coding Connecting the AV receiverAbout AV Connections Optical Digital JacksConnecting Your Speakers Connecting the AV receiverConnecting the Speaker Cables Speaker Connection PrecautionsStrip about 5/8 15 mm Attach the FM antenna, as shown Connecting AntennaConnecting the Indoor FM Antenna Connecting the AM Loop AntennaConnecting an Outdoor AM Antenna Connecting an Outdoor FM AntennaUsing a TV/FM Antenna Splitter Audio Connection Formats Connecting Both Audio & VideoWhich Connections Should I Use? Video Connection FormatsMonitor Out Connecting Your TV or ProjectorAudio Connections Your TV must also be connected via component video Connecting a DVD PlayerUsing Analog Connections Video ConnectionsUsing a Multichannel Connection Connecting a VCR for PlaybackComponent Video Connecting a D-VHS VCR for PlaybackTV or VCR, etc Connecting a VCR for RecordingPlayback from the Recording VCR VCR recordingSatellite, cable, set-top box, LD player, etc Using Optical or Coaxial ConnectionsCD player Connecting a Cassette Recorder Connecting a CD PlayerDigital Recording Connecting a DAT, CD, or MD RecorderUsing Optical or Coaxial Connections Playback only Analog ConnectionsTurntable without a Built-in Phono Preamp Connecting a TurntableConnecting Components Turntable with a Built-in Phono PreampTurning On the AV receiver Connecting the Power Cords of Other ComponentsStandby/On Submenus First Time SetupAbout the Onscreen Setup Menus Main menusInitial Setup First Time SetupDigital Input Tor, and then use the Left Component Video SetupMain menu appears onscreen Buttons to select an input selecButtons to select Speaker SetupSpeaker Setup menu appears Then use the Left and RightButtons to select d. Surround DefaultCrossover Double BassButtons to specify the dis- tance Speaker DistanceTance, and then press Enter Speaker Distance menu appearsSpeaker Level Calibration Repeat this step to select TAPE, MD, or CDR Changing the TAPE/MD/CDR DisplaySelecting the Input Source Basic OperationStart playback on the source component Basic Operation Setting the Display BrightnessUsing the Sleep Timer Using HeadphonesInterpreting Surround Channel Values Displaying Source InformationYou can display various information about the current Input source as followsUse the Tuner input selector Using the TunerTuning into Radio Stations Listening to the RadioDisplaying Radio Information Presetting Radio StationsSelecting Preset Stations Deleting PresetsDetailed information about the listening modes Selecting with the Remote ControllerSelecting on the AV receiver See About the Listening Modes on page 51 forDVD, LD, CD, etc Analog Dolby D DTS/DTS 96/24*2 Input signal formatOnkyo Original DSP Modes About the Listening ModesAdvanced Operation Using the CinemaFILTERUsing the Late Night Function Dolby Digital only Adjusting the Bass & TrebleAdvanced Operation Adjusting Individual Speaker LevelsRecording Audio RecordingRecording Separate AV Sources AV RecordingDolby Digital Advanced SetupDecoder Setup Analog/PCMAudio Adjust Functions Advanced SetupMono Theater-DimensionalPlii Music Virtual Surr Level Use the Up and Down Buttons to select the signal forListening Mode Preset menu appears Assigning Listening Modes to Input SourcesIntelliVolume Setting PreferencesVolume Setup Digital Format OSD SetupRemote Setup 6-7., 6-8 V Trigger SetupControl ID Changing the Remote Controller’s IDPress and hold down the Receiver but Ton, and then press the TV Input buttonZone Connecting ZoneUsing a Receiver/Integrated Amp in Zone Using Only Speakers in ZoneHardware Setup menu appears Buttons to select a. PoweredZone 2, and use the Left Buttons to select 3. Hardware Setting the Zone 2 OutOuts Hardware Setup menu appears Zone 2 OUT L/R jacks can also be used as preUsing Zone Using a Multiroom Kit with Zone Using the Remote Control in ZoneUsing the 12V Trigger Adjusting the Bass & Treble for Zone2Controlling Out-of-range Components Using a Multiroom Kit with a CabinetCodes for Integra DVD Players Entering Remote Control CodesSetting the MD/CDR Button to CDR Controlling Other ComponentsResetting the Remote Controller Resetting Remote Mode ButtonsControlling Other Components DVD DVD player Remote Control CodesSAT satellite receiver ABC CBL cable receiverSBR NAD Controlling a Cable Receiver Controlling a TVButtons Controlling a VCR Controlling a Satellite ReceiverRec NumberLearning Commands from Another Remote Controller Making Macros Using MacrosRunning Macros Troubleshooting Troubleshooting Zone 2 has turned off? Remote controller doesn’t work?Can’t control other components? Can’t record?Display doesn’t work? Sound changes when I connect my head- phones?Speaker volume cannot be set as required? Speaker distance cannot be set as required?Tuner Section SpecificationsAmplifier Section Video Section3 4 3 8 2

DTR-4.5 specifications

The Integra DTR-4.5 is a versatile and feature-rich AV Receiver designed to deliver an immersive home theater experience. At its core, this model exemplifies Integra's commitment to high-fidelity audio and video performance, making it an ideal choice for audiophiles and home cinema enthusiasts alike.

One of the standout features of the DTR-4.5 is its robust audio processing capabilities. The receiver supports Dolby Atmos and DTS:X, providing a three-dimensional soundstage that allows users to experience movies and music in a new light. The Advanced Digital Audio Processing ensures that every sound is rendered with clarity and precision, replicating the dynamics of a live performance.

In terms of connectivity, the DTR-4.5 is equipped with multiple HDMI inputs and outputs, supporting 4K Ultra HD video pass-through and scaling. This enables seamless integration with modern video sources and displays, allowing users to enjoy high-resolution content without compromising quality. The receiver also features HDCP 2.2 compatibility, ensuring it can support the latest streaming services and content protection standards.

For those who value convenience, the DTR-4.5 includes built-in Wi-Fi and Bluetooth functionality, allowing wireless streaming from various devices. Integra also provides an intuitive mobile app that enables users to control their AV system from their smartphones or tablets, further enhancing the user experience.

An essential characteristic of the DTR-4.5 is its room calibration technology. The Auto Room Acoustic Calibration system analyzes the acoustic property of the listening environment and adjusts settings accordingly. This ensures optimal sound distribution and compensates for room anomalies, providing a balanced audio experience regardless of the room configuration.

The construction of the DTR-4.5 reflects Integra's dedication to quality, featuring a solid chassis and premium components that minimize distortion and maximize performance. This attention to detail is evident not only in sound quality but also in the visual aesthetics of the unit, which complements modern home theaters beautifully.

Overall, the Integra DTR-4.5 is a powerhouse of an AV receiver, combining cutting-edge audio technology with user-friendly features. Its commitment to high-quality performance, modern connectivity options, and adaptability make it a standout choice for anyone looking to elevate their home entertainment experience. Whether for movies, music, or gaming, the DTR-4.5 delivers a captivating experience that is sure to impress.
Top Page Image Contents