RIDGID SP500A manual General Safety Information, Safety Signal Words, Work Area, Electrical Safety

Page 4

SP-330, SP-330D, SP-500, SP-500A Submersible Sump Pumps

General Safety Information

Safety is a combination of common sense, staying alert and understanding how your sump pump works.

Safety Signal Words

!DANGER means if the safety information is not followed someone will be seriously injured or killed.

!WARNING means if safety information is not fol- lowed someone could be seriously injured or killed.

!CAUTION means if safety information is not fol- lowed someone may be injured.

NOTICE indicates important information, that if not followed, may cause damage to the equipment or flooding.

!WARNING Read and understand all instruc- tions. Failure to follow all instructions listed below may result in fatal electric shock, fire, property damage, and/or serious personal injury.

•Do not abuse cord. Never use the cord to carry the pump or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges, or mov- ing parts. Replace damaged cords immediate- ly. Damaged cords increase the risk of electrical shock.

•Pump must be plugged into an outlet recepta- cle that includes a Ground Fault Circuit Interrupter (GFCI). In the event of current leak- age, a GFCI will trip, thus reducing the risk of seri- ous injury or death from electrical shock.

Grounded

Grounding Outlet

Blade

TESTRESET

Power

Cord

Figure 1

SAVE THESE INSTRUCTIONS!

Work Area

!DANGER

•Do not operate pump in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Pump motors create sparks which may ignite the dust or fumes.

•Keep by-standers, children, and visitors away while installing pump. Distractions can result in mistakes.

Electrical Safety

! WARNING

•This pump must be plugged into an outlet, properly installed, and grounded in accordance with all applicable codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are not sure the outlet is grounded. If the pump should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.

•Electrical wiring must be performed by a quali- fied electrician. Improper wiring could result in fatal electrical shock.

•Before using, test the Ground Fault Circuit Interrupter (GFCI) to insure it is operating cor- rectly. A GFCI reduces the risk of electrical shock.

•Do not use an extension cord. This increases the risk of electrical shock. If necessary, install a properly grounded outlet closer to the pump.

Personal Safety

!WARNING

•Stay alert, watch what you are doing, and use common sense when installing this pump. Do not attempt to install this pump while tired or under the influence of drugs, alcohol or med- ications. A moment of inattention may result in serious personal injury.

•Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

•Do not overreach. Keep proper footing and bal- ance at all times. Proper footing and balance enables better control in unexpected situations.

•Use safety equipment. Always wear eye protec- tion. Dust mask, non-skid safety shoes and hard hat must be used for appropriate conditions.

2

Ridge Tool Company

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Submersible Sump Pumps Table of Contents SP-330, SP-330D, and SP-500, SP-500A Submersible Sump Pumps 351403-005 4/04General Safety Information Safety Signal WordsElectrical Safety Personal SafetySpecific Safety Information Description and SpecificationsService Submersible Pump SafetyPerformance Chart Pump InstallationSpecifications InstallationFlood Alarm Models see figure TestingWater Level Sensor Test ButtonMaintenance Instructions Flood Alarm ModelsSuggested Part Replacement Schedule Service And RepairSymptom Possible Causes Corrective Action TroubleshootingDescription Ridgid cat. # SP330 SP330D SP500 SP500A Ridge Tool Company 351403-005 4/04 Installation de la pompe Table des matièresInformations générales de sécurité Information de sécurité spécifiqueSécurité électrique Aire de travailSécurité personnelle Description et Spécifications Information de sécurité spécifiqueSécurité de la pompe submersible Cette pompe n’est pasInstallation de la pompe Courbe de performanceTableau de performance SpécificationsNe placez pas directement Bouton de testLe flexible de décharge doit La tuyauterie extérieure doitModèles à alarme d’inondation Suggestions d’horaire de remplacement des piècesService et réparation Instructions d’entretienDépannage Le haut et le bas351403-005 4/04 Índice Información general sobre seguridadInformación específica sobre seguridad Descripción y especificacionesInformación general de seguridad Palabras de señales de seguridadÁrea de trabajo Seguridad eléctricaDescripción y especificaciones Información específica de seguridadMantenimiento y reparación Aspectos de seguridad de la bomba sumergibleCurva de rendimiento Tabla de rendimientoInstalación de la bomba EspecificacionesModelos de alarmas contra inundaciones vea la figura PruebasNo use la bomba directa La finalidad del uso de laModelos de alarmas contra inunda- ciones Servicio y reparaciónInstrucciones de mantenimiento Programa recomendado de recambio de piezasCorrección de fallas Síntoma Causas posibles Medida correctivaRidge Tool Company Ridge Tool Subsidiary Emerson Electric Co Ridge Tool Company351402-005 10/00

SP-330D, SP-330, SP500A, SP-500 specifications

RIDGID is renowned for its innovative and high-performance plumbing and mechanical tools. Among its impressive lineup, the RIDGID SP-500, SP-330D, SP-330, and SP500A stand out as exceptional options for professionals in the field. These models cater to various needs with features and technologies designed for efficiency, reliability, and ease of use.

The RIDGID SP-500 is a powerful and versatile pipe cutter that features a robust design, allowing it to handle pipes up to 5 inches in diameter. Its durable construction ensures long-lasting performance, even in demanding environments. The SP-500 utilizes a patented anti-friction roller system, which enables smooth and precise cutting, minimizing the effort required. This model also incorporates an adjustable feed mechanism, allowing for quick adaptation to different pipe sizes while maintaining consistent cutting depth.

The SP-330D is designed specifically for handling drainage and vent piping. One of its standout characteristics is its compact design, which allows for easy maneuverability in tight spaces. The dual-cutting blade technology enhances cutting efficiency, which is essential for maintaining productivity on the job. This cutter can efficiently tackle various materials, from PVC to cast iron, making it a versatile addition to any toolkit.

In contrast, the RIDGID SP-330 offers similar performance but is aimed at a more extensive range of applications. It features a user-friendly design designed for maximum comfort and control. The ergonomic handle reduces hand fatigue during prolonged use. Like the SP-500, it includes the anti-friction roller system that provides superior cutting capabilities, helping professionals achieve precise results every time.

The SP500A is an advanced model equipped with the latest technologies to ensure optimal performance. The built-in LED indicator lights illuminate the work area, making it easier to see what you’re working on, even in low light conditions. Its lightweight construction is complemented by robust materials, ensuring that it remains durable while being easy to handle. The SP500A also features quick-release jaws for fast and efficient blade changes, which is a significant time-saver during work.

Overall, the RIDGID SP-500, SP-330D, SP-330, and SP500A offer a broad spectrum of essential features and technological advancements tailored for plumbing professionals. With their impressive cutting efficiencies, user-centric designs, and robust constructions, these tools exemplify the excellence that RIDGID is known for in the industry. Whether you need a precise cutter for PVC, cast iron, or other materials, these models provide reliability and functionality that can enhance productivity on every job site.
Top Page Image Contents