Performance Curve, Performance Chart, Installation

! WARNING

SP-330, SP-330D, SP-500, SP-500A Submersible Sump Pumps

Specifications

Motor:
Type	Shaded Pole
Rating	120V, Single Phase
	1/3 HP, 9.5 Amps
	1/2 HP, 10 Amps
Pump
1/3 HP	3100 GPH @ 0 Ft.
1/2 HP	4400 GPH @ 0 Ft.
Liquid temperature range ....	40F to 120F
Cut in level	9”
Cut out level	4”

•Pump must be plugged into an outlet recepta- cle that includes a Ground Fault Circuit Interrupter (GFCI) (Figure 1).

•Always disconnect the power source before attempting to install, service, relocate, or main- tain the pump. Never handle a pump or pump motor with wet hands or when standing on wet or damp surface or in water.

Installation

1.Construct a sump pit from concrete, steel, or plas- tic that is 24” deep and at least 11” in diameter (Figure 2 next page). If the sump already exists,

Performance Curve

	25
	25
(Feet)	20
	20
							SP-500
							SP-300
	15						SP-300D
Discharge							SP-500A
							SP-500A
	10


	5
	5


	0	1000	2000	3000	4000		5000			6000
			Gallons Per Hour
Performance Chart
Model		Discharge Head			0’			5’		10’	15’
SP-330		Gallons/Hour		3100		3000			2700		1680
SP-330D		Gallons/Hour		3100		3000			2700		1680
SP-500		Gallons/Hour		4400		4100			3200		2000
SP-500A		Gallons/Hour		4400		4100			3200		2000

Pump Installation

!DANGER

•Pump should only be used to pump clear water. Do not use to pump fluids such as gaso- line, fuel oil, or kerosene. Do not use in a flam- mable or explosive atmosphere. Improper use could result in personal injury and/or death.

To prevent property damage, serious injury, or death, proper installation of the pump is required. The following procedures should be followed:

make sure it is the proper size.

2.Make sure the electrical outlet is grounded and is rated for 115 volts and at least 15 amps. The out- let must be protected by a Ground Fault Circuit Interrupter (GFCI).

! WARNING Use of a grounded receptacle that is protected by a GFCI reduces risk of a fatal electrical shock.

3.Inspect the power cord and plug for damage. If the plug is missing the grounding prong or the cord is damaged, do not install the pump until the cord has been replaced.

(Model SP-330D Diaphragm Switch only)

4.Remove the two fasteners in the cast iron volute near the discharge area. Align the hole with the diaphragm switch and replace the fasteners with- out over tightening.

Figure 2 – Submersible Pump Installation

4	Ridge Tool Company

SP-330D, SP-330, SP500A, SP-500 specifications

RIDGID is renowned for its innovative and high-performance plumbing and mechanical tools. Among its impressive lineup, the RIDGID SP-500, SP-330D, SP-330, and SP500A stand out as exceptional options for professionals in the field. These models cater to various needs with features and technologies designed for efficiency, reliability, and ease of use.

The RIDGID SP-500 is a powerful and versatile pipe cutter that features a robust design, allowing it to handle pipes up to 5 inches in diameter. Its durable construction ensures long-lasting performance, even in demanding environments. The SP-500 utilizes a patented anti-friction roller system, which enables smooth and precise cutting, minimizing the effort required. This model also incorporates an adjustable feed mechanism, allowing for quick adaptation to different pipe sizes while maintaining consistent cutting depth.

The SP-330D is designed specifically for handling drainage and vent piping. One of its standout characteristics is its compact design, which allows for easy maneuverability in tight spaces. The dual-cutting blade technology enhances cutting efficiency, which is essential for maintaining productivity on the job. This cutter can efficiently tackle various materials, from PVC to cast iron, making it a versatile addition to any toolkit.

In contrast, the RIDGID SP-330 offers similar performance but is aimed at a more extensive range of applications. It features a user-friendly design designed for maximum comfort and control. The ergonomic handle reduces hand fatigue during prolonged use. Like the SP-500, it includes the anti-friction roller system that provides superior cutting capabilities, helping professionals achieve precise results every time.

The SP500A is an advanced model equipped with the latest technologies to ensure optimal performance. The built-in LED indicator lights illuminate the work area, making it easier to see what you’re working on, even in low light conditions. Its lightweight construction is complemented by robust materials, ensuring that it remains durable while being easy to handle. The SP500A also features quick-release jaws for fast and efficient blade changes, which is a significant time-saver during work.

Overall, the RIDGID SP-500, SP-330D, SP-330, and SP500A offer a broad spectrum of essential features and technological advancements tailored for plumbing professionals. With their impressive cutting efficiencies, user-centric designs, and robust constructions, these tools exemplify the excellence that RIDGID is known for in the industry. Whether you need a precise cutter for PVC, cast iron, or other materials, these models provide reliability and functionality that can enhance productivity on every job site.