Windsor 22 SP manual Faults, Error Remedy

Page 20

Faults

Error

Remedy

Appliance cannot be started

Check batteries, charge if required. Fully charge battery

 

if it has got discharges so that the electronics system can

 

release the function lock.

 

Check battery pole fuse at the positive pole of the battery

 

(100 A); inform customer service if the fuse is defective.

Insufficient water quantity

Check fresh water level, refill tank if necessary.

 

Check hoses for blockages; clean if required.

 

Saber Compact 22 SP: Remove the cover of the water

 

supply at the suction head and clean the water canal.

 

 

Insufficient vacuum perfor-

Clean the seals between dirty water reservoir and cover

mance

and check for tightness, replace if required.

 

 

 

Clean the lint filter.

 

Clean the squeegee blades on the squeegee tool, turn or

 

replace if required

 

Check if the vacuum hose and squeegee tool are chok-

 

ked, clean if required

 

Check the vacuum hose for tightness; replace if required.

 

Check if the cover on the dirty water discharge hose is

 

closed

 

 

 

Check the setting of the squeegee tool.

 

Check whether the turbine is running and is creating un-

 

der-pressure; call Customer Service, if required.

 

 

Insufficient cleaning result

Drive in the running gear.

 

Check the brushes for wear, replace if required.

 

Check detergent metering (optional).

Detergent dose gets reduced

Replace pump hose of the metering pump.

The detergent bottle gets de-

Tilt out the detergent intake and take out the detergent

formed when detergent is suk-

bottle.

ked out of it. There is no air

Close the lid of the detergent bottle.

coming in to equalise the

Pull out the valve (rubber cap) and clean it in warm water.

pressure.

Replace the valve.

Brushes do not turn

Check if foreign matters block the brushes; remove for-

 

eign matter if required.

Drain hose for dirtyy water is

Open metering equipment at the drain hose. Pull out the

blocked

vacuum hose from suction beam and close it by hand.

 

Set the program selection switch to suction or vacu-

 

uming. The blockage will be sucked out from the drain

 

hose into the dirty water tank.

20English

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Saber Compact 22 Saber Compact 22 SP Page Grounding Instructions EnglishOperating Safety Rules Practices Connect to a Properly Grounded Outlet onlyMaintenance and Rebuild Practices Fire Safety StandardContents Safety instructionsSymbols Switching on after emergency-stopFunction Proper useOperating elements Installing the Brushes Installing the SqueegeeBefore Commissioning UnloadingInsert batteries and connect BatteriesInsert the vacuum hose Charging battery Charging process is cancelledCharging process Insert the plug of the charger into the socketMaintenance-free batteries wet batte- ries Start upOperation Chemical fillingCleaning Programs Battery control displayDriving to the Place of Use Open the cover of the fresh water reser- voirSettings Reset parametersAdjustable Minstepm Remark Parameters Info buttonSetting the Squeegee Tool Traction driveCleaning Shutting Down the ApplianceDraining the Dirty Water Reservoir Close the water quantity regulatorMaintenance and care Maintenance scheduleEmptying the fresh water tank TransportMaintenance Works Empty the waste containerTurn or replace squeegee blades Replacing the brush rollersTroubleshooting Maintenance contractFrost protection Replace pump hoseTery English Errors with displayOverload Display Error Remedy Faults Error RemedySpecifications Spare parts Only for authorised technicians Every 200 operating hoursEvery 400 operating hours Every 800 operating hoursPage Déplacements NE Brancher QUÀ UNE Prise DE Courant Avec Mise À LA TerreRegles ET Pratiques DE Securite DE FONCTIONNE- Ment Responsabilité de lopérateurNorme DE Securite Incen DIE Entretien de lunité par lopérateurTable des matières Touche darrêt durgenceProtection de l’environnement FonctionUtilisation conforme Eléments de commande Avant la mise en service Déchargement de la machineMontage des brosses Montage de la barre daspirationEmmancher le flexible daspiration Montage et branchement de la batterieSécurité de polarisation de la batterie Chargement de la batterieChargement Brancher la fiche secteur du chargeur dans la priseMise en service Batteries recommandéesFonctionnement Remplissage de carburantTémoin de contrôle de la batterie Déplacement vers le lieu dutilisationLes programmes de nettoyage Bouton dinfo RéglagesMenu Utilisateur Retourner le paramètreEntraînement de déplacement Réglage de la barre daspirationNettoyage Arrêt et mise hors marche de lappa ReilVidange du réservoir deau sale Sélecteur sur programme de nettoyage positionEntretien et maintenance Plan de maintenanceVidange du réservoir deau propre Après le travailTravaux de maintenance Contrat de maintenance Protection antigelÉchanger les disques-brosses Changer le flexible de pompePannes Pannes avec affichage Témoin Display Panne Remède De sur ContrainPannes Saber Compact 22 SP Retirer le capot dalimentationDeau à la tête daspiration et nettoyer le canal deau DuitDonnées techniques Pièces de rechangeToutes les 200 heures de service Toutes les 400 heures de serviceToutes les 800 heures de service Uniquement pour le personnel spécialisé et autoriséeGuarde Estas Instruc Ciones Instrucciones DE Puesta Tierra Conectar Sólo a UNA Responsabilidad del operarioGeneralidades Durante la circulaciónNormas DE Seguridad Contra Incendios Cuidado de la unidad por parte del OperarioÍndice de contenidos Instrucciones de seguridadSímbolos Dispositivos de seguridadProtección del medio ambien FunciónUso previsto Elementos de mando Antes de la puesta en marcha DescargaMontaje de los cepillos Montaje de la barra de aspiraciónBaterías Coloque la manguera de aspiraciónCarga de batería Proceso de cargaPuesta en marcha FuncionamientoAdición de combustibles Baterías que no requieren manteni- miento baterías húmedasConducción hasta el lugar de em Pleo Programas de limpieza versiónIndicador de control de batería Levante la barra de aspiraciónConfiguraciones Botón de informaciónMenú de usuario Reestablecer los parámetrosAjuste de la barra de aspiración TraslaciónLimpieza Detención y apagadoVaciado del depósito de agua sucia Selector de programas en el programa de limpieza posiciónVaciado del depósito de agua limpia TransportePlan de mantenimiento Después del trabajoCambiar o girar los labios de aspira- ción Trabajos de mantenimientoAnualmente Vaciar el depósito de basura sólo Sa- ber Compact 22 SPCambiar el cepillo de disco Cambiar la manguera de la bombaContrato de mantenimiento AveríasProtección antiheladas Averías con indicación Indica Display Avería Modo de subsanarla Ción de SobrecarAverías Avería Modo de subsanarlaSaber Compact 22 SP Extraer la cubierta de la alimen Nal de aguaDatos técnicos Piezas de repuesto¡Sólo para personal técnico autorizado Cada 200 horas de servicioCada 400 horas de servicio Cada 800 horas de servicioPage Page Windsor Industries Limited WarrantyProduct PE Housing Non- PE Parts Service Labor Travel Brush motor, Vacuum motor All other parts/Labor 1 year Belts, Swivel Neck 3 yearsVacuum motor, Belts 2 years All other parts/Labor 1 year Product exceptions and ExclusionsProducts that have experienced ship- ping or freight damage Day Warranty Extension AvailableThis Warranty Shall Not Apply To

22, 22 SP specifications

The Windsor 22 SP,22 is a modern marvel in the world of commercial and residential vehicles, offering a combination of advanced technology, exceptional performance, and user-centric design. With its sleek and aerodynamic body, the Windsor 22 SP,22 is not only visually appealing but also engineered for efficiency, making it a popular choice among both drivers and fleet managers.

One of the standout features of the Windsor 22 SP,22 is its powerful engine options. Equipped with a state-of-the-art, fuel-efficient engine, the vehicle strikes a balance between performance and economy. This translates to lower operating costs and reduced environmental impact, making it an attractive option for those who are conscious about sustainability. The engine also boasts impressive torque, ensuring that drivers experience seamless acceleration and ample power, whether navigating urban streets or cruising along highways.

The Windsor 22 SP,22 is designed with cutting-edge safety technologies. Its robust construction includes advanced crumple zones and reinforced cabin design, providing occupants with added protection in the event of a collision. Additionally, the vehicle is equipped with a suite of electronic safety features, such as anti-lock braking systems (ABS) and electronic stability control (ESC), which help enhance vehicle control and reduce the risk of accidents.

Comfort is another key attribute of the Windsor 22 SP,22. The interior features ergonomic seating with high-quality materials, ensuring a pleasant ride for both drivers and passengers. The cockpit is thoughtfully organized, with an intuitive dashboard layout that puts essential controls and information within easy reach. Moreover, the vehicle includes advanced climate control systems, allowing occupants to maintain their preferred temperature regardless of external conditions.

Connectivity is a critical factor in the modern driving experience, and the Windsor 22 SP,22 does not disappoint. The vehicle is outfitted with an array of technological amenities, including Bluetooth connectivity, integrated navigation systems, and touch-screen infotainment options. This ensures that drivers remain connected and entertained, even during long journeys.

Overall, the Windsor 22 SP,22 stands out in the competitive vehicle market due to its blend of innovation, comfort, and safety. Whether utilized for commercial purposes or personal use, it is designed to meet the demands of modern drivers while catering to the evolving needs of the transportation landscape.
Top Page Image Contents