CPG CPG #2561255 manual Style Z Class a Module for NAC circuits CAM

CPG #2561255 FIRELARM 2500 Operating Manual

A.3 Style Z (Class A) Module for NAC circuits (CAM)

UL LISTED: For use with the FireLarm 2500 Part No. 345-0234

TRANSIENT PROTECTED

BUILT IN 5.1K END OF LINE RESISTOR

POWER REQUIREMENTS IN ALARM: Approx. 25mA @ 24VDC from control panel notification appliance circuit

The Model CAM Style Z (Class A) Module is designed to be used with the FireLarm 2500 Fire Control Panels to convert a single Style Y (Class B) notification appliance circuit to a Style Z (Class A) circuit (one module is required for each notification appliance circuit). The module is provided with snap track which is mounted to the cabinet via double-sided foam tape and secured by two #6 sheet metal screws. The module should be mounted in the area below the main circuit module as shown below so that the terminals are accessible.

Figure A-3. CAM Module Wiring.

CAM			-	TO INDICATING
			RED	APPLIANCE CIRCUIT
				TERMINALS.
				REMOVE EOL RESISTOR.
			+	POLARITY SHOWN IS FOR
			BLACK	STANDBY (NON-ALARM)
				CONDITION
1	2	3	4
+	+	-	-
	EXTERNAL
	INDICATING
290-0029	APPLIANCES

Figure￿￿￿￿￿A￿￿￿￿￿￿￿-4. CAM￿￿￿￿Module Location.

USE FOAM TAPE TO MOUNT SNAP		￿￿￿￿￿￿￿
TRACK IN CABINET AND SECURE
WITH TWO #6 SHEET METAL
SCREWS BEFORE MOUNTING CAM
MODULE IN SNAP TRACK		￿￿
￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

A

B

C

D

E

A-3