CPG CPG #2561255 manual Appendix E. Quick Reference Operating Instructions FireLarm

CPG #2561255 FIRELARM 2500 Operating Manual

Appendix E. Quick Reference Operating

Instructions

FireLarm 2500

Normal Standby	Green AC indicator on. All other indicators off.
Alarm Conditions	Red zone indicator on. Audible/visual signaling indicator
	operating
To Silence Alarm	Do not silence alarm until it has been determined that an
	emergency situation does not exist (panel must be reset to
	silence waterflow alarms). Open cover and press . This will
	also cause the bell trouble indicator to flash.
To Reset an Alarm	After condition that caused alarm has been corrected, press
	.
Trouble Conditions	Yellow SYSTEM TROUBLE indicator and buzzer on. Yellow
	indicator for specific trouble on (battery, zone, trouble, etc.)`
Supervisory Condition	Yellow SYSTEM TROUBLE indicator and buzzer on. Yellow
	SUPERVISORY indicator on (valve closed, low air, low
	temperature, etc.)
To Silence Trouble	Open cover and press . The panel automatically restores
Devices	to normal when the trouble condition has been corrected.
	Some trouble conditions require pressing for restoration.
	Note: The problem must be corrected as soon as possible as
	this may make system inoperative. Contact your service
	organization if necessary.
To Test Alarm	Notify building occupants (if a fire department or other
	monitoring agency, such as a Central Station alarm company,
	monitors alarms, they must also be notified). Open cover,
	press and hold for 2 seconds.

This system should be thoroughly inspected on a regular basis in accordance with the NFPA-72 National Fire Alarm Code and the authority having jurisdiction. Contact the agency listed below for this service.

For Service, Call

Name:

Address:

Telephone:

INSTALLER: FRAME THIS SHEET AND PLACE ADJACENT TO CONTROL PANEL

CPG Signals

2519 4th Ave., P.O. Box 590, Moline, IL 61265

(800)577-5758 / (309) 762-0731 / FAX (309) 762-8215 www.cpglifesafety.com

E

E-1