Hearth and Home Technologies 6000TRSI-AUC, Heat & Glo manual Power Outage, FAN Operation

B. POWER OUTAGE

In the event of a power interruption during opera- tion, either push the OFF button on the remote control or open access door and push the switch to OFF (as shown in Figure 39) to shut off manually. The switch must be returned to the ON position prior to operation once power is restored.

SWITCH IS SHOWN

IN "ON" POSITION

Figure 2.2

C. FAN OPERATION

The accessory fan is wired in series with a speed con- trol switch and a temperature sensor switch. Set the speed control to an "ON" position and light the heater. The temperature sensor switch will automatically start the fan when the switch warms up—and stop the fan when it cools down. You can manually stop the fan by turning the speed control switch to "OFF". See Figure 1.30 for fan wiring diagram.

Heat & Glo • 6000TRSI-AUC • 2078-900 Rev. G • 12/06 27