Sears 116.28014 manual Toclean Agitator, Agitator Assembly, To Replace Belt

Page 21

TOCLEAN AGITATOR:

NOTE: In order to keep cleaning efficiency

high and to prevent damage to your vacu- um cleaner, the agitator must be cleaned every time the belt is changed.

The agitator must also be cleaned accord- ing to the following schedule:

Vacuum		Cleaner Use		Clean	Agitator
HEAVY		-		every	week
(used	doily)
MODERATE			-	every	month
(used	2-3		times/week)
LIGHT	-			every	2 months
(used	]	time/week)

IMPORTANT

Turn off and unplug vacuum cleaner from

electrical outlet. Check and remove hair, string and lint build-up frequently in the PowerMate agitator and end cop areas.

Remove any dirt or debris in the belt path area or in the brush roller area.

Carefully remove any string or debris located on the agitator or end caps.

AGITATOR ASSEMBLY

-End Cap _nn_

n n_ Belt Path_

,°0d

TO REPLACE BELT

1. Install new
belt	over		for
			for
motor	drive,
then	over		ire
belt	path.
	\	\	Path
	Agitator	End Cap

NOTE: See PARTS AND FEATURES for Belt number.

2. Place agitator

assembly back into PowerMate.

cover and agitator

(2)screws. replace two

4.Line up front of cover and base. Rest cover on front edge of base as shown.

5.Rotate cover back. Press cover firmly until side latches snap into place.

Make sure there is no gap between the cover and base.

6.Turn PowerMateupside down and replace five (5) cover screws.

ZInsert floor brush into PowerMate until floor brush locks

into place.

-21 -

Image 21

Contents English/ Espaol Model/Modelo Use & Care Guide Manual de Use y CuidadoMotor Safety Filter Changing Packing ListNents assembled separately in the carton Sears Brands Management Corporation., Hoffman Estates, IL Vacuum Cleaner Help Line=4= Style No USA Canada Replacement PartsCB-6 Dust Bag 6-packAttachments CanisterTelescoping Wand HoseWAND-TELESCOPING Hose To rewind Turn off HOW to StartAny way OutElectronic Touch Control When lit indicates the canister motor isSuggestedsweeping pattern Product Damage HazardNot provide Attachments on Wand Attachments on HandleContour Brush WandsAttachment Cleaning AreaUSE Table DustingEdge Cleaner Performance FeaturesVacuum Cleanerworks Overload ProtectorClogs RemovingOther surfaces until they are washed. They could leave marks Cleaning Exterior and AttachmentsExhaust Filter Changing Motor Safety Filter ElectrostaticExhaust Filter Hepa Washed as it will lose itsdust trapping abil= ityDirt Sensor To Clean the LensesTo Remove Belt Belt Changing and Agitator CleaningAgitator Assembly Toclean AgitatorTurn off and unplug vacuum cleaner from To Replace BeltCleaning To Replace Agitator AssemblyBeltchanging and Agitator Cleaning AgitatorRun when attached PowerMate will notConstant green light on in dirt sensor Performance IndicatorReplacement ProductMore product Page Fecha de Compra Lista DE EmbalajeNOmero de Modelo NOmero de Serie ParaGarantia Iimitada de un ao Expuesta a a intemperie o se ha dejado caer No toque la aspiradora ni el enchufe con las manos mojadasSujetapapees, etc. PodHan daar a Pieza no EstiloNo En EUA En Canad6 Correa CB-6 Partes DE ReemplazoEscape SecjuridadAccesorios ReceptaculoManguera PowermateTube Telescopico Control electr6nico diIzquierda para AdvertenciaLA Tapa Y LA Cubierta ReceptaculoManguera IntroduzcalaPara enrollar Para Comenzar AdvertenciaPara impedirdao Handle ReleaseCuidado Poder para IniciarProtectora. Esta peffcula puede ser removida Quitar LOS Residuos DE Basura EN Sugerencias Para AspirarAccesorios DEL Mango Sugerenciassobreelajustede Nivel DE Pelode LA AlfombraCepillo Para Contorno Accesorios DEL TuboCepillopara Piso Desmontable Cepillo Para SacudirAccesorio MuebI.JProtector Contra Sobrecargas DE RendimientoLimpiador DE Orillas Indicador DE Check BAGSosten Para LA Escalera Quitar LOS Residuos DE Basura EN LOS ConductosIndicador DE Polvo EN OperacionCambo DE LA BolsaLimpieza DEL Exterior Y DE LOS Accesorios Cambio DEL Filtro DE Escape Cambio DEL Filtro DE Seguridad DEL Motor AdvertenciaFiltro DE Seguridad DEL Motor Electrostatico Filtro DE Escape HepaPara Detector DE PolvoLimpiar LAS Lentes R6pida y jalandoCambio DE LA Correa Y Limpieza DEL Agitador Para Retirar LA CorreaInferiorhacia Importante Limpieza DEL AgitadorEnsamble DEL Agitador RetirarPara Revisar LOS Cepillos Cuidado DEL Agitador AdvertenciaPara Cambiar EL Agitador Cambio DE LA Correa Y Limpieza DEL AgitadorLa PowerMate no funciona Aspirar Fluctuociones de macorriente Page Www,sears,ca =800.LE=FOYERMC