5.Press the Power Level Selection button to turn on both the canister and
PowerMafe motors.
0
o i
<OPENSuction CLOSE>Control L_
®
Power
Level Selection
CAUTION
DO NOT leave the PowerMate running in one spot in the upright position for any
length of time. Damage to carpet may occur.
ELECTRONIC TOUCH CONTROL
Power Level Selection - turns on both
the Canister and PowerMate. The button cycles through HIGH,
MEDIUM, and LOW power levels.
The canister motor always starts in HIGH
power. Press the Power Level Selection button as needed to adjust power level.
POWER LEVELS:
H - when lit indicates the canister motor is
running at HIGH power.
M - when lit indicates the canister motor is
running at MEDIUM power.
L - when lit indicates the canister motor is
running at LOW power.
®CARPET/BAREFLOOR - turns the PowerMate motor on for cleaning of carpets and off for cleaning of bare floors. CARPET/BARE FLOOR mode will be indicated on the handle
display.
OFF = turns off canister and PowerMate motors.
NOTE: When the vacuum cleaner is in
BARE FLOOR mode, the wand light DOES NOT function since no electricity flows to the PowerMate.
NOTE: The hose handle display may have a protective film. This film may be removed.