Sears 116.28014 manual PowerMate will not, Run when attached

Page 23

Review this table to find do-it-yourself solutions for minor performance problems. Any other

service needed, should be performed by a Sears or other qualified service agent.

WARNING

Always turn off and unplug vacuum cleaner before performing maintenance to the

vacuum

cleaner.

Fallure to do so could result in electrlcal

shock or personal

injury.

Vacuum

cleaner won't

].

Unplugged at wall outlet.

I.

Plug in firmly,

press ON/OFF

switch.

start.

2.

Tripped circuit

breaker/blown

2.

Reset circuit

breaker or

replace fuse.

fuseat

household service panel.

3.

Loose hose electrical

3.

Reconnect hose ends.

connections.

Poor job

of dirt

1.

Full or clogged

dust bag.

I.

Change bag.

pick-up.

2.

Clogged airflow passages.

2.

Clear airflow

passages.

3.

Dirty

filters.

3.

Change filters.

4.

Wrong

pile height setting.

4.

Adjust

setting.

5.

Wrong

power

level selected.

5.

Adjust

control.

6.

Hole

in hose.

6.

Replace hose.

7.

Worn

PowerMate agitator.

7.

Change agitator.

8.

Worn

or broken belt.

8 & 9.

See BELTCHANGING AND

9.

Dirty

agitator

or end caps.

AGITATOR CLEANING.

10.

Canister hood

open.

10.

Close and latch hood.

11.

Tripped overload protector in

11.

Remove any

items that may

be

PowerMate.

caught

or jammed, then

reset. If

vacuum cleaner starts and stops

again, clean agitator and end caps, then reset.

Vacuum cleaner starts	I.	Hose or	hood electrical
but shuts off.		connections.
	2.	Tripped	overload	protector	in
		PowerMate.
	3.	Tripped	thermal	protector
		in canister.
PowerMate will not	1.	PowerMate connections
run when attached.		unplugged.
	2.	Worn or broken		belt.
	3.	Dirty agitator or end caps.
	4.	Tripped	overload	protector	in
		PowerMate.
	5.	Vacuum	cleaner	in BARE
		FLOOR mode.

I.Check connections, reconnect hose ends.

2.Remove any items that may be caught or jammed, then reset. If vacuum cleaner starts and stops again, clean agitator and end caps, then reset.

3.See PERFORMANCE FEATURES- "Thermal Protector."

]. Plug in firmly.

2&3. See BELTCHANGING AND

AGITATOR CLEANING.

4.Remove any items that may be caught or jammed, then reset. If vacuum cleaner starts and stops again, clean agitator and end caps, then reset.

Press CARPET/BARE FLOOR

button to change to CARPET mode.

- 23 -

Image 23

Contents English/ Espaol Model/Modelo Use & Care Guide Manual de Use y CuidadoNents assembled separately in the carton Motor Safety Filter ChangingPacking List Sears Brands Management Corporation., Hoffman Estates, IL Vacuum Cleaner Help Line=4= Dust Bag 6-pack Replacement PartsStyle No USA Canada CB-6Attachments CanisterTelescoping Wand HoseWAND-TELESCOPING Hose Out HOW to StartTo rewind Turn off Any wayElectronic Touch Control When lit indicates the canister motor isNot provide Suggestedsweeping patternProduct Damage Hazard Wands Attachments on HandleAttachments on Wand Contour BrushDusting Cleaning AreaAttachment USE TableOverload Protector Performance FeaturesEdge Cleaner Vacuum CleanerworksClogs RemovingOther surfaces until they are washed. They could leave marks Cleaning Exterior and AttachmentsWashed as it will lose itsdust trapping abil= ity Motor Safety Filter ElectrostaticExhaust Filter Changing Exhaust Filter HepaDirt Sensor To Clean the LensesTo Remove Belt Belt Changing and Agitator CleaningTo Replace Belt Toclean AgitatorAgitator Assembly Turn off and unplug vacuum cleaner fromAgitator To Replace Agitator AssemblyCleaning Beltchanging and Agitator CleaningRun when attached PowerMate will notConstant green light on in dirt sensor Performance IndicatorMore product ReplacementProduct Page Para Lista DE EmbalajeFecha de Compra NOmero de Modelo NOmero de SerieGarantia Iimitada de un ao Sujetapapees, etc. PodHan daar a Expuesta a a intemperie o se ha dejado caerNo toque la aspiradora ni el enchufe con las manos mojadas Secjuridad Partes DE ReemplazoPieza no EstiloNo En EUA En Canad6 Correa CB-6 EscapeAccesorios ReceptaculoControl electr6nico di PowermateManguera Tube TelescopicoIzquierda para AdvertenciaIntroduzcala ReceptaculoLA Tapa Y LA Cubierta MangueraHandle Release Para Comenzar AdvertenciaPara enrollar Para impedirdaoProtectora. Esta peffcula puede ser removida CuidadoPoder para Iniciar Quitar LOS Residuos DE Basura EN Sugerencias Para AspirarAccesorios DEL Tubo Sugerenciassobreelajustede Nivel DE Pelode LA AlfombraAccesorios DEL Mango Cepillo Para ContornoMuebI.J Cepillo Para SacudirCepillopara Piso Desmontable AccesorioIndicador DE Check BAG DE RendimientoProtector Contra Sobrecargas Limpiador DE OrillasEN Operacion Quitar LOS Residuos DE Basura EN LOS ConductosSosten Para LA Escalera Indicador DE PolvoLimpieza DEL Exterior Y DE LOS Accesorios Cambo DELA Bolsa Filtro DE Escape Hepa Cambio DEL Filtro DE Seguridad DEL Motor AdvertenciaCambio DEL Filtro DE Escape Filtro DE Seguridad DEL Motor ElectrostaticoR6pida y jalando Detector DE PolvoPara Limpiar LAS LentesInferiorhacia Cambio DE LA Correa Y Limpieza DEL AgitadorPara Retirar LA Correa Retirar Limpieza DEL AgitadorImportante Ensamble DEL AgitadorCambio DE LA Correa Y Limpieza DEL Agitador Cuidado DEL Agitador AdvertenciaPara Revisar LOS Cepillos Para Cambiar EL AgitadorLa PowerMate no funciona Aspirar Fluctuociones de macorriente Page Www,sears,ca =800.LE=FOYERMC