Hearth and Home Technologies CASTINS-CWL owner manual Castile Pellet Insert, MBK 810-03201 PMH

Page 1

R

CASTILE PELLET INSERT

 

 

 

Owner’s Manual

 

 

 

 

Listed by

O-T L

Oregon USA

Installation and Operation

 

 

 

 

Tested and

 

Portland

 

 

 

 

C

 

US

 

 

 

 

 

 

 

 

 

 

 

OMNI-Test Laboratories, Inc.

Models:

 

 

 

 

 

 

 

810-02901 (MBK)

 

 

 

 

 

 

 

810-03201 (PMH)

 

 

 

 

 

 

 

CASTINS-CSB

 

 

 

 

 

 

 

CASTINS-CWL

 

 

 

 

 

 

 

 

 

CAUTION

 

 

 

DO

 

 

 

 

 

 

DO NOT DISCARD THIS MANUAL

 

DISCARD

• Important operating and

•

Read, understand and

•

Leave this manual

 

NOT

maintenance instruc-

 

follow these instruc-

 

with party respon-

 

 

tions included.

 

tions for safe installa-

 

sible for

use and

 

 

 

 

tion and operation.

 

operation.

 

 

 

WARNING

Please read this entire manual before installation and use of this pellet fuel-burning room heater. Failure to follow these instructions could result in property damage, bodily injury or even death.

•Do not store or use gasoline or other flam- mable vapors and liquids in the vicinity of this or any other appliance.

•Do not overfire - If any external part starts to glow, you are overfiring. Reduce feed rate. Overfiring will void your warranty.

•Comply with all minimum clearances to com- bustibles as specified. Failure to comply may cause house fire.

CAUTION

Tested and approved for wood pellets and shelled field corn fuel only. Burning of any other type of fuel voids your warranty.

WARNING

HOT! DO NOT TOUCH.

SEVERE BURNS MAY RESULT.

CLOTHING IGNITION MAY RESULT.

Glass and other surfaces are hot during operation and cool down.

•Keep children away.

•CAREFULLY SUPERVISE children in same room as appliance.

•Alert children and adults to hazards of high temperatures.

•Do NOT operate with protective barriers open or removed.

•Keep clothing, furniture, draperies and other combustibles away.

CAUTION

Check building codes prior to installation.

•Installation MUST comply with local, regional, state and national codes and regulations.

•Consult local building, fire officials or authorities having jurisdiction about restrictions, installation inspection, and permits.

www.quadrafire.com

250-7251F

September 1, 2008

Page 1 Page 2
Image 1
Page 1 Page 2
Contents 810-02901 MBK 810-03201 PMH Castile Pellet InsertLocation Inside hopper on the top Castile Pellet InsertTable of Contents Appliance Certification BTU & Efficiency Specifications Listing and Code ApprovalsMobile Home Approved Glass SpecificationsFire Safety Design, Installation & Location ConsiderationsGetting Started Appliance LocationInspect Appliance & Components and Pre-Use Check List Castile Pellet Insert Tools And Supplies NeededAppliance Dimensions 3Dimensions and Clearances0mm Clearance To Exposed Section And Face Trim Castile Pellet Insert Clearance To Combustibles, UL and ULCShown Optional Outside Air Inches MillimetersFloor Protection Castile Pellet Insert Masonry and Zero Clearance FireplacesMinimum Opening for Masonry and Zero Clearance Fireplaces Location Inches MillimetersStarter hole Mark area of floor to cut Chimney and Exhaust Connection 4Vent InformationVenting Termination Requirements Castile Pellet Insert Equivalent Feet of Pipe Pipe Selection ChartExample of 3 Elbow-Rear Vent Termination Calculation 5Venting Systems Castile Pellet Insert Full Reline With Outside Air 6Mobile Home Mobile Home InstallationRear Vent Installation Top Vent Installation7Appliance Set-Up Reversible Top or Rear Flue Adapter Leveling SystemItemDescription Assembled ViewCastile Pellet Insert Zero Clearance Trim Support Cont’d Base Plate Only InstallationKit Includes See Piece. FigurePanel & Trim Set, Econo Panel Set And Cast Trim SetTop Log Installation Four Piece Log Set InstallationCastile Pellet Insert Thermostat Installation Fuel Size And Material Operating InstructionsGeneral Operating Information Fire Characteristics Feed Rate AdjustmentCastile Pellet Insert Before Your First Fire Starting Your First FireCastile Pellet Insert Iginition Cycles Frequently Asked QuestionsSymptom TroubleshootingPossible Cause Corrective Action Page Symptom Possible Cause Corrective Action Cleaning or Inspection Quick Reference Maintenance Chart10Maintaining & Servicing Your Appliance Frequency Daily Weekly Monthly YearlyCleaning Firepot with Cleaning Rod & Firepot Scraper Remove Cast Sides for Cleaning & MaintenanceAsh Removal from Firebox See Disposal of AshesCleaning Beneath Heat Exchanger Cleaning Heat Exchanger Chambers & Drop TubeCleaning the Exhaust Path Cleaning Convection Blower Requires No Lubrication Cleaning the HopperCleaning the Glass Cleaning Exhaust Blower Requires No LubricationDoor Gasket Inspection High Ash Fuel Content MaintenancePreparing Firebox for Non-Burn Season Frequency Yearly Igniter Replacement 35.1 Baffle & Brick Set RemovalRe-installing Baffle & Brick Set Cont’d Component Function Wiring Harness See .1 below Vacuum SwitchSnap Disc #1 Convection Blower 110F Snap Disc #2 Fuel Delivery Interrupt 250FCastile Pellet Insert Component Locations Cleaning Rods & Heat Exchanger TubesGlass Size 11-5/8 wide x 17-1/4 high Castile Pellet Insert Exploded ViewsDescription Item # Part Description, Alphabetical Order Part Number Castile Pellet Insert Service Parts and AccessoriesItem No Appliance Item No Accessories, Alphabetical OrderItem # Part Description, Alphabetical Order Date of Service Performed By Description of Service Castile Pellet Insert Service And Maintenance LogCastile Pellet Insert Service And Maintenance Log Cont’d Castile Pellet Insert Homeowner’s Notes CONDITIONS, Exclusions & Limitation of Liability Castile Pellet Insert Warranty PolicyHearth & Home Technologies Limited Warranty Cont’d Telephone Castile Pellet Insert

CASTINS-CWL, CASTINS-CSB, 810-03201 (PMH), 810-02901 (MBK) specifications

Hearth and Home Technologies has made a significant mark in the hearth and home industry with a variety of innovative products, including models like the 810-02901 (MBK), 810-03201 (PMH), CASTINS-CSB, and CASTINS-CWL. These models reflect state-of-the-art design and engineering, ensuring comfort and efficiency in residential heating solutions.

The 810-02901 (MBK) model is designed primarily for modular design, allowing for easy installation and integration into various home architectures. This model features advanced combustion technology that maximizes fuel efficiency while minimizing emissions. It is equipped with an innovative air control system that provides users with precise control over flame height and heat output, enhancing the overall user experience. With features such as a large viewing area, the MBK model provides an attractive look while ensuring optimum safety.

The 810-03201 (PMH) model offers versatile heating options and an elegant design that fits seamlessly into modern interiors. This model is notable for its user-friendly interface, which enables users to control settings with ease. It also has a remarkable heat distribution system, allowing warmth to spread evenly throughout the space, reducing cold spots and enhancing comfort. Additionally, the PMH model is built with durable materials that withstand the test of time, making it a long-lasting investment for homeowners.

The CASTINS-CSB and CASTINS-CWL models represent the pinnacle of contemporary fireplace design with their cast iron construction, enhancing durability and offering superior heat retention. Both models feature intricate designs that not only elevate the aesthetic of any room but also provide effective heating solutions. With the CASTINS series, Hearth and Home Technologies emphasizes the importance of safety with features such as heat shields and advanced flue systems that ensure proper ventilation.

In summary, Hearth and Home Technologies' 810-02901 (MBK), 810-03201 (PMH), CASTINS-CSB, and CASTINS-CWL models are characterized by their innovative technology, elegant design, and efficient heating capabilities. These models cater to a variety of homeowner needs, providing comfort, efficiency, and safety while enhancing interior aesthetics. Whether you’re looking for a robust heating solution or an elegant focal point in your home, Hearth and Home Technologies offers durable and stylish options that stand out in any environment.
Top Page Image Contents