Hearth and Home Technologies 810-03201 (PMH) Panel Set And Cast Trim Set, Panel & Trim Set, Econo

Page 19

R

Castile Pellet Insert

E. Panel Set And Cast Trim Set

Included in Panel Kit: (2) side panels, left and right; (1) panel top; (1) fastener package.

Included in Cast Trim Kit: (2) cast trim legs, left and right; (1) cast trim header; (2) cast trim footers, left and right; (1) fastener package.

Tools Needed: Powered Phillips head screw driver

1.Remove contents from box being careful not to scratch or damage the cast trim pieces.

2.Lay the panel set face down on protective covering to prevent scratching the painted surface.

3.Secure the panels legs to top panel with the screws provided.

4.Now bend the tabs down toward the backside of the panel set, 5 on top and 2 on each leg. Leave the panel set face down.

5.Place the corresponding cast trim pieces ( 2 cast trim legs and 1 cast trim header) underneath the panel set, also face down.

6.Place washer provided over tab and secure the trim and panel together with screw. Continue for all tabs.

7.Secure cast footers with screws.

8.Remove both left and right cast sides from insert, See Figures 28A, 28B and 28C on page 28.

9.Slide panel and trim over the top of the insert into place matching the mounting tabs on the panel with the slots on the insert.

CAUTION

•Do NOT pick up assembled unit by corners.

•It is too heavy and may damage the panels.

•Pick up from center.

F. Panel & Trim Set, Econo

Included in Panel & Trim Kit: (2) corner brackets and set screws; (1) trim set, 3 piece; (2) side panels; (1) top panel;

(4) screws;

Tools Needed: Powered Phillips head screw driver

1.Secure the top panel to the panel sides with the screws provided. Figure 19.3.

2.Assemble the gold trim with the (2) corner brackets provided. Figure 19.4.

3.Slide the assembled trim over the assembled panel set.

4.Slide panel and trim over the top of the insert into place matching the mounting tabs on the panel with the slots on the insert.

Back of Top Panel

Screws

Back of Side Panel

Figure 19.3

 

 

 

 

 

2. Bend tabs down

 

1. Screw panels

 

 

 

 

 

 

together

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Screw panels

together

2. Bend tabs down

3. Install Cast Trim Header

Mounting tabs on each panel leg to match up with slots on insert.

View of "L" Bracket

installed

Figure 19.4

Figure 19.1

Figure 19.2 - Completed View

of Panel Set & Cast Trim Set

September 1, 2008

250-7251F

Page 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 810-02901 MBK 810-03201 PMH Castile Pellet InsertLocation Inside hopper on the top Castile Pellet InsertTable of Contents Glass Specifications Listing and Code ApprovalsAppliance Certification BTU & Efficiency Specifications Mobile Home ApprovedAppliance Location Design, Installation & Location ConsiderationsFire Safety Getting StartedInspect Appliance & Components and Pre-Use Check List Castile Pellet Insert Tools And Supplies NeededAppliance Dimensions 3Dimensions and ClearancesInches Millimeters Castile Pellet Insert Clearance To Combustibles, UL and ULC0mm Clearance To Exposed Section And Face Trim Shown Optional Outside AirLocation Inches Millimeters Castile Pellet Insert Masonry and Zero Clearance FireplacesFloor Protection Minimum Opening for Masonry and Zero Clearance FireplacesStarter hole Mark area of floor to cut Chimney and Exhaust Connection 4Vent InformationVenting Termination Requirements Castile Pellet Insert Equivalent Feet of Pipe Pipe Selection ChartExample of 3 Elbow-Rear Vent Termination Calculation 5Venting Systems Castile Pellet Insert Full Reline With Outside Air 6Mobile Home Mobile Home InstallationReversible Top or Rear Flue Adapter Leveling System Top Vent InstallationRear Vent Installation 7Appliance Set-UpItemDescription Assembled ViewPiece. Figure Base Plate Only InstallationCastile Pellet Insert Zero Clearance Trim Support Cont’d Kit Includes SeePanel & Trim Set, Econo Panel Set And Cast Trim SetTop Log Installation Four Piece Log Set InstallationCastile Pellet Insert Thermostat Installation Fuel Size And Material Operating InstructionsGeneral Operating Information Starting Your First Fire Feed Rate AdjustmentFire Characteristics Castile Pellet Insert Before Your First FireCastile Pellet Insert Iginition Cycles Frequently Asked QuestionsSymptom TroubleshootingPossible Cause Corrective Action Page Symptom Possible Cause Corrective Action Frequency Daily Weekly Monthly Yearly Quick Reference Maintenance ChartCleaning or Inspection 10Maintaining & Servicing Your ApplianceSee Disposal of Ashes Remove Cast Sides for Cleaning & MaintenanceCleaning Firepot with Cleaning Rod & Firepot Scraper Ash Removal from FireboxCleaning Beneath Heat Exchanger Cleaning Heat Exchanger Chambers & Drop TubeCleaning the Exhaust Path Cleaning Exhaust Blower Requires No Lubrication Cleaning the HopperCleaning Convection Blower Requires No Lubrication Cleaning the GlassDoor Gasket Inspection High Ash Fuel Content MaintenancePreparing Firebox for Non-Burn Season Frequency Yearly Igniter Replacement 35.1 Baffle & Brick Set RemovalRe-installing Baffle & Brick Set Cont’d Component Function Snap Disc #2 Fuel Delivery Interrupt 250F Vacuum SwitchWiring Harness See .1 below Snap Disc #1 Convection Blower 110FCastile Pellet Insert Component Locations Cleaning Rods & Heat Exchanger TubesGlass Size 11-5/8 wide x 17-1/4 high Castile Pellet Insert Exploded ViewsDescription Item # Part Description, Alphabetical Order Part Number Castile Pellet Insert Service Parts and AccessoriesItem No Appliance Item No Accessories, Alphabetical OrderItem # Part Description, Alphabetical Order Date of Service Performed By Description of Service Castile Pellet Insert Service And Maintenance LogCastile Pellet Insert Service And Maintenance Log Cont’d Castile Pellet Insert Homeowner’s Notes CONDITIONS, Exclusions & Limitation of Liability Castile Pellet Insert Warranty PolicyHearth & Home Technologies Limited Warranty Cont’d Telephone Castile Pellet Insert

CASTINS-CWL, CASTINS-CSB, 810-03201 (PMH), 810-02901 (MBK) specifications

Hearth and Home Technologies has made a significant mark in the hearth and home industry with a variety of innovative products, including models like the 810-02901 (MBK), 810-03201 (PMH), CASTINS-CSB, and CASTINS-CWL. These models reflect state-of-the-art design and engineering, ensuring comfort and efficiency in residential heating solutions.

The 810-02901 (MBK) model is designed primarily for modular design, allowing for easy installation and integration into various home architectures. This model features advanced combustion technology that maximizes fuel efficiency while minimizing emissions. It is equipped with an innovative air control system that provides users with precise control over flame height and heat output, enhancing the overall user experience. With features such as a large viewing area, the MBK model provides an attractive look while ensuring optimum safety.

The 810-03201 (PMH) model offers versatile heating options and an elegant design that fits seamlessly into modern interiors. This model is notable for its user-friendly interface, which enables users to control settings with ease. It also has a remarkable heat distribution system, allowing warmth to spread evenly throughout the space, reducing cold spots and enhancing comfort. Additionally, the PMH model is built with durable materials that withstand the test of time, making it a long-lasting investment for homeowners.

The CASTINS-CSB and CASTINS-CWL models represent the pinnacle of contemporary fireplace design with their cast iron construction, enhancing durability and offering superior heat retention. Both models feature intricate designs that not only elevate the aesthetic of any room but also provide effective heating solutions. With the CASTINS series, Hearth and Home Technologies emphasizes the importance of safety with features such as heat shields and advanced flue systems that ensure proper ventilation.

In summary, Hearth and Home Technologies' 810-02901 (MBK), 810-03201 (PMH), CASTINS-CSB, and CASTINS-CWL models are characterized by their innovative technology, elegant design, and efficient heating capabilities. These models cater to a variety of homeowner needs, providing comfort, efficiency, and safety while enhancing interior aesthetics. Whether you’re looking for a robust heating solution or an elegant focal point in your home, Hearth and Home Technologies offers durable and stylish options that stand out in any environment.
Top Page Image Contents