2.2.2 CROSS FLOW FAN
1. Remove the front grille. (Refer to section 2.1.1)
2. Remove the control box assembly. (Refer to section 2.1.2)
3. Remove the
4. Loosen the screw on the cross flow fan. (See Figure 9)
Figure 9
5. Remove the 4 screws which fasten the indoor motor and the earth wire. (See Figure 10)
6. Remove the supports on both sides.
7. Pull the cross flow fan out from the
8.
Figure 10
2.2.3 AXIAL FAN
1. Remove the brace.
2. Remove the 4 screws which fasten the condenser with the shroud and the basepan. (See Figure 11)
3. Remove the condenser sideways carefully.
Figure 11
4. Remove the clamp which secures the fan with pliers.(See Figure 12)
5. Remove the axial fan.
6.
Figure 12
Copyright ©2008 LG Electronics. Inc. All right reserved. | - 11 - |
Only for training and service purposes | LGE Internal Use Only |
|