Installation
1. Installation of indoor, Outdoor unit
Read completely, then follow step by step.
1) Select the best location
1. Indoor unit
■Do not have any heat or steam near the unit.
■Select a place where there are no obstacles in front of the unit.
■Make sure that condensation drainage can be con- veniently routed away.
■Do not install near a doorway.
■Ensure that the space around the left and right of the unit is more than 50cm(19.7”). The unit should be installed as high on the wall as possible, allowing a minimum of 10cm(3.9”) from ceiling.
■Use a stud finder to locate studs to prevent unnec- essary damage to the wall.
More than
10cm(3.9") More than
50cm(19.7")
More than | More than | |
50cm(19.7") | ||
2m(6.6ft) | ||
|
CAUTION
Install the indoor unit on the wall where the height from the floors more than 2m(6.6ft).
■Rooftop Installations:
If the outdoor unit is installed on a roof structure, be sure to level the unit. Ensure the roof structure and anchoring method are adequate for the unit loca- tion. Consult local codes regarding rooftop mount- ing.
2) Piping length and elevation
| Capacity |
|
| Pipe Size | Standard | Max. |
| Max. | Additional | |||||
|
|
|
|
|
|
| Length | Elevation |
| length | Refrigerant | |||
| (Btu/h) |
| GAS |
| LIQUID | (m) | B (m) |
| A (m) | (g/m) | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| 18K |
| 5/8" |
| 1/4" | 7.5 | 15 |
|
| 30 | 20 | |||
|
|
| (24.6ft) | (49.2ft) |
| (98.4ft) | ||||||||
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
| Outdoor unit | Indoor unit |
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
| A |
|
|
|
|
|
|
|
| A |
| ||
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Indoor unit |
|
|
|
| B |
|
| B |
|
| Outdoor unit | |||
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2. Outdoor unit
■If an awning is built over the unit to prevent direct sunlight or rain exposure, make sure that heat radia- tion from the condenser is not restricted.
■Ensure that the space around the back and sides is more than 10cm(3.9”).
The front of the unit should have more than 70cm(27.5”) of space.
■Do not place animals and plants in the path of the warm air.
■Take the air conditioner weight into account and select a place where noise and vibration are mini- mum.
■Select a place so that the warm air and noise from the air conditioner do not disturb neighbors.
| More than 60cm(24") | |
More than 10cm(3.9") | More than 10cm(3.9") | |
More than 70cm(28") | More | |
than 60cm(24") | ||
|
Outdoor unit
Oil trap | A |
| |
Indoor unit |
|
B
In case more than 5m(16.4ft)
CAUTION
•Capacity is based on standard length and maximum allowance length is on the basis of reliability.
•Oil trap should be installed every 5~7 meters(16.4~23ft).