Janome MB-4 manual Threading the needle with the needle threader

z

w

x

c

r

v

Threading the needle with the needle threader

zHold the needle threader with a triangle mark facing

q	up. Insert the thread into the Y-notch of the threader
	from the right.
	q Triangle mark
	w Y-notch

e

x Slide the threader down along the needle while pushing it gently until the threader pin goes into the needle eye.

Place the V-notch over the needle just above the needle eye.

e V-notch

cPush the threader until the threader pin comes out through the needle eye with a loop of thread.

r Threader pin

vRemove the threader from the needle slowly, leaving the thread loop behind the needle eye.

t	Using the tweezers, pull the loop of the thread out
	to the back.
	t Tweezers

21