Janome MB-4 manual PC Design Cards, Inserting the PC Design card, Ejecting the PC Design card

Page 77

q

w

e

r

e

SECTION 4. OPTIONAL ITEMS

PC Design Cards

You can open embroidery patterns from the PC Design cards using the RCS unit.

Inserting the PC Design card

Insert the PC Design card into the card slot on the RCS unit with the front side of the card facing toward you.

Push the card in until the card ejector button pops out.

qCard slot

wFront side of the card e Card ejector button

Ejecting the PC Design card

Press the card ejector button and the card will pop out. Take the card out from the RCS unit.

rPC Design card

NOTE:

When turning the power on with the PC Design card inserted, it will take a few moments to start up the RCS unit.

z

q			1		2		3		4
q


			5		6		7		8


			9		10		11		12

x	Location :
	Location :		0.1/3MB
		RCS	0.1/3MB
		RCS
	RCS
		MB-4
		Card
		USB-Memory
		CD-ROM
c
	1	2	3	4
	5	6	7	8
	9	10	11	12

e

Opening the embroidery pattern from the PC Design card

zPress the open file key. q Open file key

x Press the circle key next to the card icon.

w

w Circle key (PC card)

cThe file list window will open. Press the desired file icon to open.

e File icon

NOTE:

The RCS unit is also compatible with ATA PC cards (CompactFlash and adapter).

Refer to pages 70-73 for how to save and open the file.

74

Image 77

Contents Instruction Book Important Safety Instructions Grounding Instructions Table of Contents Installing the Machine Setting UP the MachineRemoving the Head Stoppers Adjusting the feetPage Names of Parts RCS unit optional item Sub control panelOptional RCS unit Standard AccessoriesStandard Accessories Assembling the Spool Stand Setting the spool of thread Setting the Thread Cones or Spools of ThreadSetting the thread cone Installing the Hoop Supporter Installing the RCS Unit optional item Grounding Instructions Connecting the Power SupplyDirect PC-Link Stabilizers Bobbin ThreadsNeedles Winding the Bobbin Inserting the bobbin Removing the bobbin caseInserting the bobbin case Threading needle No.1 Threading the Needle⁄22 Threading the needle with the needle threader Setting the Fabric in the Embroidery Hoop Adjusting the Hoop Supporter for Optional Hoops Setting the Embroidery HoopLCD brightness adjusting dial Mode buttonMachine operating buttons Start/Stop buttonLCD screen Y uStitch count setting Machine SettingsColor section layer setting Needle bar number settingStarting to Embroider N1253 N2224HM1 ? M1 02010 02/13 Removing the Hoop Adjusting the needle thread tension Adjusting the Thread TensionAdjusting the bobbin thread tension Tension is too tightReplacing the needle Replacing the NeedleChecking the needle Basic Operation of the Optional RCS Unit Menu key Function keysFile open key SET keyOn-screen Help Movie Disconnecting the RCS Unit Selecting the Embroidery Patterns Advanced Operation with the Optional RCS UnitSelecting the built-in designs Automatic color assignment Function keys circle keysColor list option Manual color assignment Monogramming Lettering orientation Function keys Font selectionLetter size Letter caseSaving the monogram Entering the charactersTo insert a character Correcting the text To delete a characterVertical orientation Placement of monogrammingHorizontal orientation Multi-color monogramming Editing Selecting the hoop Editing FunctionsMoving the pattern Resizing the patternSaving the file Rotating the patternDeleting the pattern Flipping the pattern Duplicating the patternMonogramming in an arc To customize the colors of the pattern image Customizing the color settingCombining the Patterns and Lettering ⁄2 Edit Bright Blue Trac Outline M2126X110mm Eco mode setting Customizing the Setting with the Sub Control PanelBuzzer sound control Machine ID numberFormatting the memory Resetting all to defaultsMaximum sewing speed Thread selectionSetting the thread detector sensitivity Setting the trim tail lengthReminder message ON/OFF Ignoring short stitchesJump thread trimming threshold Jump thread trimming ON/OFFInch/mm option Customizing the Settings with the Optional RCS UnitLCD brightness adjustment Touch screen calibration Screen saverMachine ID and name Yes ⁄3Hoop selection for monogramming ⁄1Grid size⁄2Maximum sewing speed ⁄5Screen color options ⁄4Selecting the thread brand⁄8Ignoring short stitches ⁄6Reminder message ON/OFF⁄7Reserving the color for the needle bar ¤0Setting the thread detector sensitivity ⁄9Setting the trim tail length¤2Setting the number of jumps for trimming ¤1Jump thread trimming ON/OFF¤3Language selection Saving the Pattern as a File File ManagementCreating a new folder Opening a file Deleting the file Deleting the folderInserting the PC Design card PC Design CardsEjecting the PC Design card Opening the embroidery pattern from the PC Design cardOpening the embroidery pattern from the USB memory USB MemoryOpening the embroidery pattern from the CD-ROM CD-ROM DriveCleaning the Bobbin Case Cleaning the HookCleaning the Auto Thread Cutter Mechanism Oiling Audible signal Buzzer sounds when Error MessagesAudible Signals Problem Cause Reference TroubleshootingTroubleshooting