z
M1 00001 01/13 1
Starting to Embroider
zSelect the pattern you wish to sew. The LCD screen shows the Ready to sew mode display.
NOTE:
The embroidery result may vary depending on the fabric and threads used. Make a test embroidery using the same fabric and threads before sewing on the actual garment.
we
x
N1:253 N2:224
q
r
c
v
t
xPress the ENTER button to check the thread color assigned to each needle bar. The screen will show the needle bar number and color code.
q ENTER button
w Needle bar number e Color code
Adjust the hoop position by pressing the arrow buttons if necessary.
r Arrow buttons
cTo check the needle drop position, lower the needle bar with the small screwdriver so you can see the needle point closer to the fabric.
Push down the needle bar using the screwdriver while pressing it against the needle clamp as illustrated.
The needle bar can be lowered by turning the handwheel clockwise.
CAUTION:
Make sure to bring the needle bar and presser foot to the up position by pressing the auto thread cutter button before pressing the trace button or turning the machine off.
vPress the trace button to check the size and position of the selected pattern against the hoop.
t Trace button
NOTE:
Check if the fabric edge will not obstruct the movement of the
27